Get Free Energy with AC Motor and Car Alternator 💡 | Oscillating Magnet | New Liberty Engine #1
Вставка
- Опубліковано 1 тра 2024
- Hi friends!!! In this new video we want to share with all of you a new way to generate FREE ELECTRICITY. With a CAR ALTERNATOR we have built this high efficiency brushless generator that is capable of generating a power of 10,000 watts of peak, and a voltage of 220 volts of Alternating Current. It is much more than enough to generate electricity for an entire home
We hope you like this video.
Warning: The use, copy, manipulation or broadcast of this video or part of it without the consent of the author is totally prohibited. This video is protected by copyright.
If you want to see this engine put to test, go to: • New Free Energy | We p...
#wood_stove
#generator
#220vgenerator
#electricgenerator
#freeenergy
___
Index:
00:00 Introduction
00:18 Modification of a car alternator to make a Brushless Generator
00:25 Removing the pulley
01:05 Removing the alternator
02:54 Modifying the rotor
03:53 Gluing the Neodymium magnets
07:04 Preparation of the Epoxy Resin
09:30 We solder the copper winding cables
10:19 We assemble the Brushless Electric Power Generator
12:22 Coupling the single-phase motor
12:32 Making the motor bracket
14:02 Fixing the motor pulley
14:23 Making the bracket for the Brushless Generator
16:06 Fixing the motor and generator on the wooden base
16:40 Connecting generator and motor with the transmission belt
17:10 Making the electrical connections
18:40 Perpetual Power Generator finished
18:59 Testing the Perpetual Power Generator
--
Don't try to replicate this at home
-------------------------------------------------------------
Become a member to enjoy many advantages!
Conviértete en miembro de este canal para disfrutar de ventajas:
💥 / @hiddentechnology_
-------------------------------------------------------------
Join us!
💥 Telegram Private Channel: t.me/hiddenTechnology
💥 Website: www.crazychannel.net
💥 Facebook: dakrazychannel
💥 Twitter: / thecrazychanne4
💥 Instagram: / dacrazychannel
___
HOW WE RECORD OUR VIDEOS
-Sony RX10 IV: amzn.to/3VDUXFg
- iPhone 14 Pro Max: amzn.to/3CipqSi
- K&F Concept Tripod: amzn.to/3YSvMBP
- Cayer FP1450 Tripod: amzn.to/3C7gIWX
- Display Batteries: amzn.to/3IgeoRt
- Screen for Sony FEELWORLD F5 Pro V2 camera: shorturl.at/aQSZ9
oscillating magnet
energia libre
magnetmotor
diy
perpetuum mobile
oscillating magnetic field
car alternator
free energy generator
Get Free Energy with AC Motor and Car Alternator
how to generate
110 volts
220 volts - Наука та технологія
The hardest part of building a free energy device is where to hide the batterys
Battery not enough strong for this
@@Nyam-vl3wk So you believe it? LOL
Totally agree, this is nothing but a dupe for fools.
@@Jouniii no
U don't know about Technic brother
I already have one. It's called a bucket. You stand in it and pull up very hard on the handle and simply lift yourself up in the air. Works great.
🤣🤣love the analogy!
@@neilappeal20 It is not analogy. Physics of it was proven in every Bethesda game... As Todd Howard says: It just works :D
Obvio, con magia todo es posible!
Only works, if you made a video bout it, where you hammering on the bucket for no reason for at least 25 minutes!
HAha
I have just built a similar device. I can power my entire house, including ovens, three bar electric fires, the TV and the fridge freezer from an electric toothbrush motor. Works flawlessly 👍💪
Hi mate, can you make one for me?
Can you please explane. Did you built with car alternator and one phase motor?
Thanks!
Hello. I would like to know more please.
You are a liar.
@@dankem4947 He simply used an old bike light generator from the 50thies with 12V default.. which increased by 10 because of the much higher speed the sec Motor runs ;) To store the power he just put togheter in a row some USB Power Banks so by the way he is now able to load his Nokia 30er series Mobile Phone too ;)
I been telling friends how to do this for years, well done my friend, this is a 0D energy generator, adding the magnets in a crank like sequence I was going with the design of 33.3° tangent to kept the magnetic push continuous, well done, install it in the back of an EV or power your home with the aid of a power bank
Amazing ...wish I knew more about this.
Teach me?? We need to pass this along to get away from relying on system
woot
yeah me to, im planning on putting one on my escooter and one in my gaming/livestreaming desk. and if i can convince NASA and MCdonalds to use it, welp the only thing left to do would be to make truckloads of them and drop them all of in Africa in the areas that dont have power
@@heroesnpatriots9622 we need to use it to FIX the system
but not untill world peace is had
Cool! He was the first one ever to have broken the 3 laws of thermodynamics at once!! Good job Einstein.
Haha
Because Einstein is a genius right?
Like a bumblebee breaks all laws of aerodynamics…..
Hey, a joke! It isn‘t possible….
@@juppidisco No it doesn't. A bumblebee is not a plane, doesn't fly like a plane, those "laws" that are validly applied to plane design do not apply to bees.
@@iffracem I said it was a joke, didn‘t I?!…. woah it is soooo exhausting
Чудо-машина! На любых оборотах выдает точно 220 вольт, нет просадки при подключении нагрузки, да еще и генератор вырабатывает больше, чем нужно для поддержания оборотов. Браво, это Нобелевская премия! Производителям электромобилей нужно показать, глядишь и акб нужен будет только для старта). Мужик свою задачу выполнил, собрал кучу просмотров, а остальное не важно в наше время, а жаль...ТУФТА короче
Кучу просмотров, кучу коментов)))
Leon id ,это просто наёбка работать не будет
Ага и вокруг травка такая рыхлая и что томне подсказывает что под травкой этой сныкан провод с бесконечной энергией🤪🤪
🤣😂😂
ELON MUSK....IS THIS REAL.?
My friend made onebut had a leisure battery to store power in.
Brilliant 👏
super interesante ahorraría un buen en electricidad es genial gracias lo intentaré después mil respetos
Like my electricity teacher once said to me "that's the alchemist dream"... Knowing that nothing is created or destroyed but transformed and that energy will always flow from where the "energy is higher to where it is lower" with mechanical and termal losses during the process. That being said, such closed circuit are "by nature" impossible to develop (unless we had all optimal and perfect components and conditions with zero losses).
Even in the scenario you mentioned in your last sentence (using what he did here as a convenient example), it still wouldn't allow us to draw power from it, because 100% of the power produced by the generator would have to be recycled back into the motor driving the generator, leaving no extra power to to power anything else.
@@i.a1932 Just to be clear, I understand that this video was made as a joke. However, just in case you don't... No, the magnets he added DON'T make up for the losses. The laws of physics don't allow for any way to make up for the losses. In our universe, according to our laws of physics, it's 100% impossible.
@@smallblockchevy1022 wrong! Dunce to the back of 5he classroom please
Science is only ever right until it’s proven wrong
Oi, desculpe eu não falar em inglês com você, mas utilize o tradutor, eu tenho um motor onde me utilizo dos conceitos de Nathan Stubblefield e eu consigo alimentar e manter o sistema carregado o suficiente para outras alimentações, minha dúvida com você é: você se embasa na física tradicional e a defende com unhas e garras, assim como fanáticos defendem sua interpretação pessoal da bíblia, ou você criou e experimentou até a fadiga sobre o tema dos geradores de energia, uma dica, olhe para o céu, veja o que existe no universo, por si só perceberá que todos os ensinamentos que recebeu até hoje por meio das academias de ciência é incapaz de sequer dar um passo...
always keep in mind..in this world, anything of REAL value that is free WILL be supressed. and has been for centuries.
im going to build mine even if it dosent work. only one way to find out.
in BOTH cases i win though either i learn or i get free energy!
Video with 4 million plus views... Suppressed...
incorrect. You are losing time and resources in both cases. There is a chance you will learn something though.
this might be the most entertaining video i've seen in months. i'd like to recommend you make a part 2 with a kick starter instead of a pull start.
definately liking the ease of the device. also a starter is a wonderful idea!
ill agree with your first point here as well. ive watched the video and shared it over 100 times, im sure of it!
Why could just connect a battery with a switch to start the motor
Да, прикольно снято: мастер там магнитики на суперклей наклеивает, куча изоленты.. эпоксидка.. для отвода глаз, работа мастера, чтоб потом на остальные основные мелочи не обратили внимание))))
1. Используется только два контакта от генератора, хотя вывел три, при этом удлинил.
2. Внимательно посмотрите, куда уходит красный и синий провода из генератора! Они уходят под мотор, и из под мотора выходят точно такие же провода, только видимо то, что приходит на розетку с измерительным прибором, далеко не из генератора.
3. Во время эксперимента с дрелью, при ее запуска, не наблюдается никакой нагрузки на ремень привода, который передает крутящий момент от двигателя к генератору. Каждый знающий механик скажет, что во время нагрузки, ремень должен растягиваться, чего вообще не происходит.
4. Шкив генератора, который приводится в движение веревкой, которую накручивают, очень малого диаметра, и привести его в движение таким способом и набрать такие обороты, просто нереально!
Выводы:
1. Видео создано для того, чтобы накрутить просмотры))) и развести лохов! Посмотрите количество лайков под видео и тогда станет понятно их количество)
он берет конструкцию в руки и ходит с ней и показывает с разных сторон.
I knew of your infinite wisdom the second you welded the strap to the pulley to get it off rather than just using an impact wrench. Genius!
impact wrenches are illegal in Russia :))
@@ColinPopoviciu 😂😂😂 👍
👆👍😂
Además con tanta tegnologia hay estractotes de poleas de alternador yo los tengo en el trabajo jajajaja
I was waiting for it to end with him putting the pieces in a milk crate and walking away!🤣🤣
Самое полезное , что он сделал, это вылил кока- колу в раковину. Молодец 🤙🤙🤙
Неужели кто то поверил в эту куйню
Да диодный мост выкинул ,а пишут генератор ПОСОЯННоГо тока ,тупые сказочника...
Ржу н(И)магу :) )))
@@TzhoiGtaIV я сделал подобие могу показать!
За счёт чего это должно работать? Закон сохранения энергии никто не отменял!
Frate esti foarte tare cunosc o familie care nu are curent electric si nu au nici posibilitatea de se conecta la retea electrica lear trebui si lor o astfel de inventie daca vrei sa ajuti sa fi mana lui dumnezeu si sa lasi ca intelepciunea care tia dato sa ajuti oameni nevoiasi fi binecuvantat domnul sa te binecuvinteze
Qual a dimensão dos ímãs que foi usado neste projeto, e qual a força em gauss de cada um, não se poderia usar um só ímã que tivesse o tamanho de 2 destes que vc usou, qual marca e modelo de alternador que foi usado nesta modificação, qual a marca e modelo do motor elétrico que foi usado? Desculpe o tanto de perguntas.
Its druck dynamo
Автор, есть пару вопросов:
Частота напряжения в трёхфазном генераторе зависит от частоты его вращения. Каким образом частота вращения настолько стабильна, что на выходе получилось 50Гц?
Почему к выходу генератора подключили только две фазы и почему между ними 220, а не 380?
Зачем было портить генератор с самовозбуждением и крепить туда неодимовые магниты, если он и так прекрасно возбуждается?
В названии ролика сказано, что генерируется бесконечная мощность. Мощность - это произведение тока на напряжение. При бесконечном токе сгорели бы провода, а при бесконечном напряжении - пробило изоляцию. Что не так с вашим "устройством"?
Механическая энергия на валу генератора частично преобразовывается в электрическую и частично тратится на преодоление силы трения. Электрическая в свою очередь передаётся на двигатель и там частично преобразуется обратно в механическую и частично тратится на преодоление силы трения. Тем не менее откуда появилась энергия на вращение других электроприборов?
И последний вопрос, самый главный - зачем выливать кока-колу в умывальник? Или без этого не будет работать?
Вопросы в точку. А ответ один - то что снято - полный бред.
Да это бредятина ради просмотров снимается. Захожу так,комменты почитать,да над идиотами посмеятся)) если бы подобное и существовало,то до наших дней об этом знали бы только еденицы людей заинтересованных? Да в каждом подвале бы по подобной штуке стояло или даже по несколько. Правительство бы запретило это на законодательном уровне😁😆
@@xSTANIMIRx я это знаю))) Стебусь просто)))
@@xSTANIMIRx да вы зае.Бали. Со своим правительством! Вечно у васкакаето сказка в голове! Просто нет технологий зделать из мало чего чегото! Причём тут кто то если ты сам он! А почему технологий нет, нету потомучто мы находимся не на шаре это не планета а часть автономного мира управляемого кем то. И в этих условиях работают только те законы физики под которые этот автономный искуственный мир создан! Нефакт что в других мирах таких же автономных другие условия жизни, например другая отмосфера воздух итд. Там и другие элементы и естественно другая таблица может полная таблица Менделеева! А не такая как у нас обрезанная! И нехер на правительство бочку гнать они тут непричём! Всё прописано в програмном коде в нашем мире по умолчанию! Но хочется его изменить но мы не можем!
@@westudio713 так Я о том,что если бы подобная технология и была доступна в противоречии законов физики нашего парка,нам бы ее запретили НА правительственном уровне. То есть Я не высказывался,что правительство(которого впринципе не существует, по крайней мере на уровне нашего парка и сознания(если это сознание можно так назвать))это хорошо или плохо!? Так проще объяснить на человеческом уровне,что как бы ты не старался,у тебя не выйдет зайти слишком далеко за рамки дозволенного тебе при этой форме существования. Сказка в голове..Я че похож на шароёба? Думаешь Я ли не понимаю,что многих элементов у нас просто нет возможности ни получить,ни узреть, так как они выходят за грань прописанного нам процессорного фактора!?
You simply cannot create energy from nowhere. Even with good bearings energy will be converted to heat by friction. Resistance in the wiring will also convert energy to heat. There is friction of the movement of the belt through the air. There is an initial input of energy from the pull cord and the machine will run for a short period until that energy has been dissipated and then it will stop. It will only run continuously if there is an additional input of energy at least equal to the losses. It certainly would not be possible to power something else. There must be a hidden power source.
I totally agree. Every rotor have a yield which is below 1. That means that the power input in it is higher than the power output. Like John says, this is the effect ogmf the friction and heat. Like Imagine Dragons say : we can't stop the friction so easy.
Using magnets...its the myth... Forexample ,gravity force,its always there,free..
Agree!
Ahhh, 10 KW out of nowhere.
Engineer skeptic
Hello l agre and just curious bc l don't have done any study for magnets .. does natural magnet gets consumed by time .. if they stay effective for long time and u use natural magnets in both sides and u use artificial magnets in left and right to make more push for inside magnets so they don't stop rotating .. will this work??
I doubt anyone that clicked on this video is interested in what your saying. Free energy has been a known myth as long as a flat earth.
This Technology is indeed hidden and so amazing
I like your invention Sir .
But I have a question, What type of magnets did you use on the rotor?
Utilizati neodim 30 / 20 / 10
Cześć. Jaka wielkość magnesów ... jakie musza być obroty silnika aby napędzić alternator , jakie przełożenia koła pasowego np 1/1 1/1,25 itd
Jak zrobisz daj znać
I thought about this 35 years ago, when I was 7 years old and didn't know about conservation of energy...
I was going to sell it to NASA and all the governments of the world for trillions of dollars
Like output from alternator goes to extention plug directly, in which is plugged electro motor, so it makes just loop or safety switch off, how they modulate 220v output, im guessing they are tapping wires from alternator output somewhere under el.motor
In same age i thought similar about infinite transition gain in bike, not sure why adults never figured this before... now tring to explain to my 10yr old kid why laptop cannot be sourced by fotobattery charged by lamp connected to themselves. 😃
@@maxscott3349 no chances, lizard people will prevent from that😂
Примерно в этом же возрасте и я пытался обмануть жизнь. Но,в старших классах,на уроке физики я понял,что практически каждый мыслящий человек думал об этом в детстве)
I've read some of these comments,and it is apparent most who are negating this to work,,can not understand the E field,,if you can't see this works you should look into electromagnetism,,and in an ordinary altinator,,the friction energy produced will make about 90 amps,,the magnets change it to electromagnetism,which Edgar leedskaline ,tells and others researched ,,great job bro,,ima build a standard one first and then a magnetic based one,,thank you
Oh brother.....
I think mist are trolls, and bots. You know how bad manufacturers hate any capable human. They'll stage a fkg massacre!
all the people having any trouble with this build should arrange a group visit to this inventor!
For the experiment, is a single-phase or three-phase motor required? And if it is three-phase, is the motor synchronous or asynchronous? Star or delta connection?
Thank you very much
Looking at that video, it was a single phase 230V AC motor, that was the output voltage he showed on the motor
Anglegrind or Drill something in the next video without cutaways.
From my perspective, I see a machine preserving the energy of the initial spin in an "low energy loss" system since its just transforming motion into electricity forth and back.
That doesnt mean it wouldnt stop right away if any resistance in form of torque is introduced.
We already recorded specifically that. Long take Putting the machine on a table, starting it, drilling a metal, and then holding the machine and walking around so everybody can see there are no wires attached and the engine lasts forever if needed.
may be it can produce som extra energy,140Amps Alternator is something like 1950W,the question is power of the motor.and the motor muss be 12V,Alternator can produce 14-20V,not 230V
you are right ..i pray for the people who actually pout money to buy this shit ...all the energy you get is from spinning the motor with your hands and that will last a while due to inertia an conservation...the moment you put a load on it it dies.
commmon sens..but this type of videos sure do make a lot of money especially with that dumb music on the backround....i would also be afraid to talk about what the fuck i m doing cause i have no clue.
@@HiddenTechnology_ Hola,
Por favor, dime cómo se polarizan los imanes que usas.
Muchas gracias,
Чувак - остановись ! Я выхожу на улицу и вижу что вокруг все машины стоят с открытыми капотами , там вырвали все генераторы . Пришел на работу , а там мой токарный станок бед асинхронного двигателя ! Из-за тебя начался зомби апокалипсис , давай прекращай .
@@apsert никогда бы не подумал что МЕНТ это разум ... Ментов обычно мусорами обзывают , в мусоре скорее меньше мозгов ! Нет тут ничего такого из заговора , просто люди хотят кэша на Ютубе , вот и делают ролики для привлечения аудитории в соответствии со своими способностями , навыками и интеллектом ...не более
Prefer to use high temperature resin to embed the magnets 😊
Quiero consultar tres cosas: 1_ donde consigues estos imanes, en què lugar de compras. 2_ Hay tres cables que salen del alternador, pero sòlo utilizas dos (por supuesto, para que haya 220Volts) pero cuàles de esos tres son los que debes usar. 3_ A la salida del alternador, no serìa mejor usar cables de 4 o 6 mm2 para poder conectar mas cosas electricas?... Es un video muy bien demostrado tanto la construccion, como la demostraciòn... Excelente! Saludos desde Lanus, Buenos Aires, Argentina!
Just think about that: the generator generates voltage with a frequency equal to the rotation (3000rpm would produce 50Hz). But the induction asynchronous motor velocity will always be slower than the mains frequency (tipicaly ~2800rpm at 50Hz). Slower motor velocity -> less alternator velocity -> less frequency -> less motor velocity -> less generator velocity -> less frequency -> (...) the motor stops.
So meaning it wouldn’t work?
This is why you have the transmission, to make the asynchronous motor run faster. Then-as per your description-the system will run faster and faster. Just make sure you are still able to stop it.
@@newerstillimproved Just pull the plug to the 220V motor or turn the switch off. The drag of the 220V motor will slow and stop the alternator.
@@scottmalchow3428 Careful. When this baby gets really going, the inertia of the current will be so high it just sparks across the plug/switch.
Friction!! Gravity wins!!!
The capacity of the alternator you used will be approximately 12, 24 volt and 130 amp capacity of Valeo products, the belt pull is OD52mm, and the used Motor 220V 0.75Kw RPM 2800 will be used.
And the magnet attached to the rotor will be n32 or n42 width 15mm * length 10mm * thickness 10t.
Under these conditions, it is said that you can get 10KW at 220 Volt output.
Knowing other people as fools.
Technology can never be fooled.
Don't cheat and be honest with a lot of people.
W
If u do know about these informations
Please tell if this project is true or not
Can u create infinite energy just by plugin two motors together
I just wanna know
Please tell me the truth
I mean
If this is real
Then why nobody is using this kind of technology
@@themss785 Video shows you it does work ..... BUT .... What there not showing you is the Voltmeter reading clearly ( how much the Voltage has dropped ), when running a drill and grinder normal together ( from what I could make out on the voltmeter , the voltage dropped to 199 volt's ) ... Now start drilling and grilling on something and watch how much the voltage drops ( They would need a regulator Governor to tell the motor to speed up when the voltage gets too Low and to slow down when voltage to High )... Bottom line , for Lite electrical use with a bulb or fan the way they have setup will work.... hope this helps
@@tloften768 thanks alot
Because if this is real
Anyone can make some changes and updates
And it will be a game changer to the whole world .
@@themss785 its bs if that work you only need one motor.
Is it necessary to glue the magnets in pairs, or can one just use longer once?
Если вы обратили внимание он склеивал как думаете для чего?
what characteristics do the magnets have?
can you put a link to make a purchase? thank you soo much
R$ 569,79 5%de desconto | Ímã forte do motor de x20 mm n42h para o ímã permanente do neodímio da turbina eólica dos geradores 24 pces ndfeb arco do ímã or18xir14x45deg.
I LOVE these 'free energy' videos. I even saw a paper by a college professor. Use electrolosis to separate water into hydrogen and oxygen, then burn the hydrogen. Yes, he wrote a paper on a 5th grade science fair experiment.
As P.T. Barnum said, "there's a sucker born every minute."
And two to carry him away….
You can light the "Free Energy" room by shining bright lights on solar panels. The light produces electricity to power the lights.
@@mickmccrory8534 Expect to see a university professor present a paper on that soon.
From wikipedia's article on perpetual motion machines: Any magnetic object which moves in a closed-loop path in the field gains no energy from the field, and in the absence of friction ends with the same total energy (kinetic plus potential) it started with. Since any moving object is also subject to friction forces, which dissipate the kinetic energy as it moves, the shaft will always end a cycle with less energy than it started with, and will eventually stop moving
Et brancher 2 phases sur 3 n'aide pas au "fonctionnement" du système
Even if this is true it would take a long time to decrease and then you could built a backup system which detects the drop and give it some more juice once in a while . All in all you would use a LOT less power then you would when only connected to the MAIN GRID. And with energy-prices sky-rocketing in my country we have no choice but to find alternatives. I hope I can get this working and then STICK IT to our greedy government with their double tax on energy !!!! I will build it for everyone who wants it overhere just to annoy this corrupt government !!
@@buddhadagreat4742 Macedonia?
Wikepedia is almost legit lol
Hahaha, the clown believes Wikipedia 😆😂🤭🤣
Poderia nos dizer mais detalhadamente sobre quantos imãs foram e a força de cada imã, poderia adicionar um link para quem deseja compra-los, um site de sua confiança! Obrigado pelo vídeo.
Achei top também, em 2015 tentei fazer mas não consegui equilibrar a atração repelir, imã utilizado neodímio!, mas dessa forma que esse cara fez e genial melhor
Olá! É possível realizar este projeto com alternador e motor de potência diferentes as utilizadas no vídeo?
Olá, esta é uma das perguntas mais frequentes sobre a utilização de alternadores e motores de potência. Afinal, é possível realizar este projeto com uma variedade de alternadores e motores, certo? Pois bem, a resposta é sim! No entanto, alguns cuidados básicos são necessários para que isso seja feito sem problemas. A seguir, listamos alguns dos principais:
- Primeiro e sem dúvidas mais importante, é preciso escolher o produto adequado às exigências do projeto.
I'd recommend using lock washers to hold any vibrating parts such as your motor mounts. they'll just vibrate loose or use lock-tight.
Oh yeah that will get it to work.
Thanks ken. So there’s no issues with the conservation of energy or anything? Just the lock washers?
Anyone who works on mechanics knows those nuts/bolts will loosen.. especially someone whos making free energy devices should lol. HEX coin $0.19 🔥🔥🔥
I would love to see that power meter put between alternator and motor to see energy contained in the system. Then watch how it changes when devices are plugged in and used. We all know how much power is drawn from those devices by themselves, would be interesting to see their load change power in system
To see the energy contained, you'd put the meter on the battery
If their was a light bulb attached it would most definitely flicker and dim 🤣
Hola, ¿Que tipo de imanes son los que necesitas y tamaño para realizar la prueba? ¿Deben pegarse con los polos opuestos si no me equivoco? ¿Como identificas cuál es el cable positivo, negativo y neutro en el alternador? Saludos, gran aporte.
Imã neodímio
Good invention. BRAVO. Few questions : What is te function of the two boxes fixed above the dynamo ? The fixation of the magnets with cyanocrilat' ruber are effective in time ? Without interuption or incident, how long tour engine could work? Geat thank's
It doesn't work at all. The video is faked, the device would use more power than it creates.
Since you’ve shown that a perpetual motion machine is possible I’m sure you’ll be awarded the Nobel Prize in Physics. I’m holding my breath……
The powers that be are never going to give up all the money made from charging people for electricity, so we can have free energy generated right at home. That was the reason JP Morgan pulled the funding from Tesla’s free energy tower experiment, once he found out it would provide free energy. JP wanted a return on his investment, a monetary return. It continues to be this way.
Who care of it's perpetual or not.. really. If I can take a small effort to get cheap electricity the what is the loss
Rotflmbo
This cant be happen due the physics principels
@@ChristianGutierrez its because it couldn't be regulated. Anyone could access any amount of energy. It creates too much equality.
Parabéns você e um gênio 🎉👏👏👏👏 top vó fazer um em casa aqui RS Br acaba luz toda vez que chove
Você fez seu gerador de energia?
Cuidado. Taxadd vai te taxar.
Hola, excelente video! ¿en base a este principio se podría crear un motor eléctrico en un alternador como he visto en otros videos? gracias
En realidad eso no funciona. Te lo digo para que no rompas un alternador y no gastes tu tiempo y energía para que al final no te funcione.
No es verdad hasen trucos cables escondidos...lo hasen para optener likes 👍
I have similar except with a triple phase transducing connection between the alternator and motor. I've been able to get between 108% to 111% efficiency.
How much time for its maximum operation? I have a little worry about how the length of time affects its temperature.
Me too!!!1!!!
@@shithappens6740 It's been about 30 years now and just wanted to let you know that I ended up realising I hadn't unplugged the alternator, after which operation immediately stopped. So I added a capacitor, accidentally spilling flux on it, which when powered up with 88 volts took me & my shed forward in time to 2052. Just came back by reversing the polarity to let you know there's free energy from the sun, the numbers are 5, 27, 29, 31, 35, 41, and you wanted me to tell you to drink some water and that you can & will do it if you start to just do it & not worry about what might happen or not if something might happen or not. That was it I think. Let me know if I missed anything. Cheers.
Would you be willing to semd me the info you have on your model? Im talking about your knowledge and schematics. I dont need to know from where you learned it.
You have them. It's the same one. You were going to make one. I've been tweaking the array to reduce the time dilations. They still pop up but with about 35% less frequency & 78% reduced effect. I even managed to control them but only very short term, 10-15min either direction. Time to go. Good luck.
hi everybody ,I read hundreds of comments but not ONE who managed to recreate this concept here .I am still waiting for that person :).please let me know then😉
Alternator in example is 14volt alternator NOT 24v / 150 A from Valeo type TG15C142. . .
En el proceso de aplicar resina a los imanes y dejarlos fijos , has tenido que equilibrar dicha pieza ? Se ve muy poca vibración y muy estable .
Hola buendia donde lo venden grasias
Tamaño de los magnetos, para ordenarlos?
Je imaginer cette idée c'est la raison pour laquelle je cherché ça sur youtube, c'est vraiment possible, merci beaucoup pour toujours
Non. C'est une arnaque.
Also, while it appears you did a decent job of trying to maintain a good weight balance, you could extend the life of the alternator bearing by performing a simple spin balance and weighting process.
All of this is a joke...awake!!!
@@Bacanalable ?
This is just variation of FORDs original car motor, where you changed internal combustion for electromagnetic motor. You as you have shown put mechanical energy(by spining) and due to laws of conservations on energy it got transferred to electromagnetic energy which due to conservative narative of electromagnetic force doesnt run out until you put resistor in system.
There are a lot of "resistors" in this system - fans, bearings, and most importantly - belt drive.
Witaj dobra robota..Mam pytanko jakiej wielkości stosowałeś magnesy neodymowe? Jakie wymiary są tych magnesów..Odpisz pozdrawiam Rsafał..
Ty ale Ty wiesz, że to nie działa?
Sieht sehr einfach aus. Was mir allerdings auf fällt, das beim Verdrahten nur zwei von drei angeschlossen werden.
Wozu der aufwand des dritten Kabel??
Wo kommt er noch hin?
As a child I had this same idea💡 I remember telling my father all about it, he told me he didn't think it would work, but couldn't tell me why? as I got older and researched the idea for myself it turns out he was right.
I also asked my dad. He said the momentum would drop when you put a load on the alternator other than a motor.
I thought the same thing but I actually tried make one with two DC motors from some toys. It didn't work
It's impossible due to many elementary and obvious reasons. First of all, NOTHING is 100% efficient. So in any type of production, transfer, or conversion of energy, there will ALWAYS be energy loss. Secondly, even if you could do these things with perfect efficiency, ONE HUNDRED PERCENT of the power produced by the generator would NEED to be cycled back into the electric motor powering the generator, which would leave ZERO amount of energy to be used for other things. The basic laws of physics don't allow something-for-nothing scenarios.ff
@@i.a1932 Well, I guess maybe you're right. And then of course there's the flux capacitor too.
No soy habilidoso para construir estas cosas pero me gustaria tenet una . Como puedo conseguir una ya hecha ? So alguien me puede informar..
I’d like to have one but I’ve already solved my energy needs with my cold fusion reactor.
Actually there is a big difference cold fusion is only almost certainly impossible.
@@kevindouglas2060 You do know what a joke is right? Actually this “Rube Goldberg machine” and Cold Fusion are both jokes.
@@marcgoff7881 cold fusion is real look at the DOD, NAVY , TESTS. 2006, they wrote a full test on the subject. Also check te Lockeed CFR project in Areospace in November 2013. Where they perfected it. Both are under wraps.. remember the Governments of the world make more money on taxing energy than the oil companies do, You do not have to do this mechanically Tesla invented a 369 device which looks like a 1 foot by 3 inch coils with another wrapped coil with 4 nodes, with. A simple magnetic field that starts it all, yup they took it and much more from the so-called 13 trunks they took from the New Yorker, Note what do you really think is running everything. Energy is the real money..
@@marcgoff7881 Nobody capable of putting together a video on this level actually believes an over unity machine is possible. There actually was a time when serious researchers went down the cold fusion Rabbit hole. Of course the results were ultimately the same.
@@kevindouglas2060 I’m violating one ☝️ of my Cardinals rules responding a second time to you. My mother told me at an early age not to debate crazy people or idiots.
Does the copper inside the rotor has still any utility for the purpose? Because when you were cutting/sanding iron parts I saw the insulation copper was damaged. Seen at 3:33
It doesn't matter, the video is faked and the device doesn't work anyway
Creative work, good greetings to you. What is the source of these magnets that you installed? I mean, where do we find them? Are they scrap or sold, and where are they sold? I am a new subscriber
You can find magnets anywhere. Just keep finding them
Si esto fuera realidad, habrías alcanzado un anhelo utópico: La máquina de movimiento perpetuo. Esta máquina hipotética sería capaz de continuar funcionando eternamente, después de un impulso inicial, (cuando arrancas la polea) sin necesidad de energía externa adicional, por la idea del principio de la conservación de la energía.
Sin embargo, esto viola el segundo principio de la termodinámica, El hecho de impulsar un móvil sin energía externa es imposible, debido a que la energía se disipa de varias formas, principalmente en forma de calor, que es lo que produciría la máquina al estar en movimiento. (¡Gracias Wikipedia!)
Has probado a hacerlo?
@@m4z3t4sh nunca manejaste un auto? al conectar las luces alta cuantas vueltas baja el motor? y aca conecta un motor para alimentar una agujereadora y no hace ni mu
True but nothing doesn't say that the energy displaced between the wiring of the alternator couldn't be extended by saying a 3 to 1 to the ac motor with 2 12v batteries as a reserve a voltage regulator and put it on a cart with ac to DC converter for this is the first step in a far journey we now see the end
No es movimiento perpetuo. Eventualmente los imanes pierden su potencia. En vez de usar la fuerza electroquímica de la gasolina, usa la fuerza magnética de los imanes. Punto.
@@m4z3t4sh no need. no chance
The developer has a lot of patience and construction skill. Viewers should not ignore the permanent magnets and how they were assembled. This project shows what people have worked on since the 80s.
People have tried getting "free" energy for centuries. It is impossible. Energy can be converted, but not created.
The first thing people should not ignore are the laws of physics. They tell you this is impossible…
@@kobus60 i have done many experiments with this device, we agree with you. 1- the frequency output of the alternator is 295Hz with the motor rotating at 2920 rpm. 2- the output voltage of the alternator using magnets is around 26V AC using a 24V alternator (not 12V). 3- you can double the output voltage to 50V AC if you connect in series with reverse polarity two faces, (+- -+ instead the normal +- +-). But the system dont work in self sustained mode. ¿Do you have any idea?
Buenas tardes, al momento de pegar los dos imanes los une en polos opuestos, ya que observó que se repelen? y agradezco mucho por compartir tus conocimientos.
Impresionante amigo, muchas gracias por compartir el vídeo
I like how they demonstrated it on a grassy field so you can't see the hidden electrical cord running things.
That’s why we made a second video with longer uncut takes in different places and moving around with it
Yeah and no view in between the cinderblocks to prove theres no battery
0
And the wires running under the electrical motor seems suspicious too
Plus covering the sound so you hear no change in load.
Для наглядности нужно было установку работающую взять в одну руку а УШМ (работающую) в другую и и пойти куда нибудь.А как хочется халявы...И сколько изведут генов после ролика...
если бы, это все так было хорошо, уже все на дачах в гаражах это использовали
Закон сохранения энергии ещё ни кто не отменял. Ясно было с самого начала, что это развод.
дебилов никто не отменял
Я уже пилю , щас , щас зароботает ......
:)
@@olegschwengler Either black holes exist and the law of energy preservation is limited as a single mom, or black holes dont exist at all. Thats the conclusion even if this experiment is false.
hello, what magnets did you use for this project? (dimensions)? great job! Regards, Norbert
doesnt matter. any will do.
@@diymicha2 not true. they have to be neodimmyum magnets shaped in a curve, one north side, one south side. and the alternator is a valeo model
if the wrong magnets are used, the output voltage will vary as well as amperage. the difference in voltage is enough to power or not power the single phase hho motor
you all need to pay VERY CLOSE ATTENTION to detail
i was curious as well
@@emberpoptartkittenz6040 not true. It absolutely doesn't matter what junk you solder together. Nothing will work. Not special magnets, nor 2x4 steel tube.
@@emberpoptartkittenz6040 I have a 220 - 5hp single stage 3450 continuous run motor. Identical to the one that drives my 80 gal. compressor in my shop. Have several alternators around. started with a 74 Chevy alt, magnets from Amazon. But I just salvaged a 2007 Lexus rx400h CVT hybrid trans and specifically for the 16 in starter motor, drive magnets and final drive motor with 9 magnets. Powerful. They charge the high voltage side. 288 but up to 600v. I have an alternator bench tester and will test the voltage with a voltmeter. The V stacked? 3/4" wide 1 1/2" long 1/4" thick. Maybe use Volvo starter 2004. Ideas?
Please, can anyone tell me exactly what type or model of alternator, electric motor, and what sprocket and timing belt length were used in this video? I want to build a perpetual motion machine like this for myself.
Check out Grainger for motor's and stuff.
This is great - I built one that is double size of this and now half of our country is running with free engery from it.
I also noticed that my TV changed its resolution from Full HD to 4K after connecting.
Really nice I will do another one to make Europe independet from Russia Oil and Gas today in the afternoon!
It's best you remain a slave
Today 😂 in this afternoon 😂 👍🏻✌🏻
Lo admirable de este vídeo es que haya conseguido 5 millones de visualizaciones. Mis felicitaciones.
la gente todavía le cree a loa políticos por que no creería esta mierda?
@@gustavoagaitan pues razón no te falta 😂
de lo contrario seria muy raro que no lo consiga seguro hay miliones ya que estan intentando reproducirlo en sus casas
Y somos parte de los 5milloes w30nes que le sumamos visitas
jajajaj toda la razon broo, yo solo vine a ver los comentarios para ver lo inocentes que somos en algunos aspectos por falta de informacion jajajja
Electricity is not my area of expertise, but as a craftsman I had many ideas on how to save a lot of money, material and time when building a house. Some thought I was crazy until I could prove that it was possible and in many cases even better, unfortunately I did No videos made, only a couple of pictures, which surprises me the most, but apparently nobody has the same ideas, so I say everything is possible and everyone has to try it out for themselves
iam soo fascinated about your work, i work in house electrical and i want to built one for personal use, i got a perfect condition alternator but it only rated on its specs as 12v 70amps, it still has its rectifier or voltage regulator, do i have to remove it? from DC it will produce AC so it doesnt need an inverter, but do you calculate the rpm of the motor so the alternator can provide enough power to run a grinder? im soo amazed on your work, your reply would be my honor.
🤣
Thank you! This is AWESOME!
No, you are.
You realise that there is no such thing as infinite/free energy this only works on UA-cam not irl
In order to move a generator with a specific power, you need an engine with a higher power than the generator because there is a loss of engine power lost in the friction of the moving parts
Correct.
And also...less moving parts = less power loss = higher efficiency ( ͡° ͜ʖ ͡°)
Higher voltage makes up for losses
Copper losses and iron losses...
@@JizzoCalrissian No it does not..
@@JizzoCalrissian Higher amperage make more losses. With higher voltage, you have lower amperage (for same power) so you have less losses.
Debe ser millonario este sujeto ya! Logró lo que se busca desde el descubrimiento de la electricidad! Premio Nóbel para Él por favor!
Bonjour à vous et merci pour cette alternative, je voulais savoir la puissance du moteur électrique,et celle de l'alternateur ? Merci beaucoup je me suis abonnée vous faites ça très bien
Это сладкое слово халява. 1-генератор на 12 или 24в напрямую не раскрутит асинхронник на 220в. 2-тормозной момент с закороченой нагрузкой не даст от шморгалки ( веревки ) раскрутить движок. 3- на кой ляд было впихивать магниты, если со штатной системой магнитной можно работать., и т.д. и т.п. Короче-развод для тех кто физику прогуливал и фокусами не владеет. Там где-то должен быть замаскирован сетевой провод. Учите люди мат-часть.
Да народ про огурец поверил ) а это вообще схавали 🤣
4 года уже пользуюсь такой схемой всë отлично работает но выход тока слишком мал . В схеме не хватает 2х уровнего стабилитрона для создания резонанса и на ренератор обязательно нужна обгонная муфта т. к. Сила тока большая. Данная схема мне выдаëт 3квт хватает на освещение дома гаража. Сейчас собираю ещë одну установку для отопления помещения более мощную и ещë минус быстро выходят из строя подшипники. Хватает примерно на год
Закон сохранения энергии. В идеальных условиях без потерь она бы теоретически и сохраняла, хоть и не увеличивалась, но в данном случае энергия приложенная на раскручивание ротора генератора тратится на подшипники, сопротивление магнитов, трение и перегиб ременной передачи, тепловые выделения, на сопротивление проводов и соединений, и это не говоря уже об серьезной нагрузки в виде электроприборов. Потери энергии огромные а прибытия ее нет. Эта шайтан арба должна была остановиться через несколько секунд. Дурика для приезжих.
все правильно,закон сохранения энергии никто не отменял,кпд итак маленькое,да еще и отбор......,зато сколько труда положили......
@@user-ok4dh6sc4e ну про подшипники ты хорошо подметил,где то я с таким сталкивался,тока не в механнике,в нлпи
eres un crack !!!! gracias por tu increíble trabajo además con un enorme facilidad de comprensión, mi abuelo arreglaba motores y siempre le comente que fabricáramos uno magnético ahora ya falleció pero este video despertó en mi ese recuerdo y el poder realizarlo gracias !
Amigo este es trucado dicho experimento es imposible porque crees que corta cada toma cuando lo saca al aire libre cuando sienta el equipo
O beun puso pilas de litio bajo el tablero
¿Puedes enviar un video de tu resultado en el futuro?
Si funciona voy a la universidad a estudiarlo. ¡Gracias!
Explica porqué está trucado , porque imanes , una bobina de cobre y ya se tendría, lógicamente con su quehacer técnico,, el 100% de los vídeos de preparación de aparatos, construcción,, decoración, pintura ,vete tú a saber, todos todos tienen cortes aquí y allá para que no duren los vídeos 13 horas,, eso lo sabes , no? Que pena!
@@urkolartategui9919 La energia infinta o movimiento perpetuo es algo imposible de lograr bro, las leyes de la termodinámica impiden que los generadores puedan producir la misma o mayor energia que el motor que lo propulsa, siempre hay perdida de energia, principalmente el rozamiento y el calor disipado
@@urkolartategui9919chistoso ese experimento lo an intentado años de años para un video que indica que cambiará el mundo debería no tener cortes en la presentación así probar lo que mucho no an podido , fácil crear el voltaje pero generar el amperage deseado para mover el motor eso sí es imposible
Can anyone identify the Alternator. I have studied the video and it seems to say VALEO and 60011 or maybe its upside down? Can anyone help? Thanks
This is incredible, I would like to do this ! Thank you for the video
keep wasting your time, do it in the name of impossible
Its really working! The importend Part is the insulation Tape. The other stuff is mostly Just nice to have.
كيف تعمل وهو غير منطقي؟!
@@sofiandz6754 that's the Point of my Joke. It dos Not Work at all ;)
No, the most importend part is the extension cord buried under the lawn. Everything else is just a waste to have.
Budujemy budujemy!!! prąd gratis to przyszłość!!jeszcze tak łatwo go wytworzyć!!!jesteście mi winni tyle ile trwał ten filmik czasu z życia!!!
Najlepsze jest to, że są gamonie, którzy łyknęli te bzdury jak pelikan cegły
@@andrzejkoparka794 dokładnie i jeszcze to sztuczne przedłużanie filmu.. żenada
I gościu ma już 5mln wyświetleń (w tym moje jedno) i o to wszystko mu chodziło, a będzie pewniej więcej. I to jest prawdziwe perpetum mobile lol
@@andrzejkoparka794 gościu ma określony wiadomy cel w tym co robi
@@kshyhnaaa Eugeniusze 🤔🤔🤔
I built 2 so far. His is much more refined but mine currently run my window air conditioner units. I'm working on building capacitive energy storage.
i have done many experiments with this device, we agree with you. 1- the frequency output of the alternator is 295Hz with the motor rotating at 2920 rpm. 2- the output voltage of the alternator using magnets is around 26V AC using a 24V alternator (not 12V). 3- you can double the output voltage to 50V AC if you connect in series with reverse polarity two faces, (+- -+ instead the normal +- +-). But the system dont work in self sustained mode. ¿Do you have any idea?
Can you please write the characteristics of the used items , the Alternator, and the motor, rated voltage/power in both of them, and the characteristics/type or dimensions of the used magnets. Thank you
good one!
Have you found out?
Лайк прям за одно впечатление что присутствуешь при изготовлении космического корабля. Никогда не думал что переборка генератора может быть настолько увлекательна :))
двойка по физике?
@@The02sparco 5++. Это видео интересно именно как развлекательное. Отбросьте смысл конечного результата и обратите внимание на саму съемку материала видео. Просто попробуйте снять ролик к примеру переборки автомобильного генератора, который было бы интересно смотреть людям. Причем абсолютно всем людям, а не электрикам и автослесарям.
ps: если лично снимите и смонтируете видео ролик на любую тему, не на теории а именно на практике, тогда и поймете чем впечатлило меня это видео, вероятно как и 5+ кк просмотревших его людей ...
@@vfp7231 Соглашусь. Мне тоже нравится сам монтаж видео сценок. Технический сюжет так сказать Наложеная музыка. Как подан видеоролик. Еще и по таймкодам поделено. Плюс на ютубчике зашло))
Если это вечный двигатель - это ещё ладно, но если автор так ловко спрятал в траве провод питания, то он вообще чертов гений
Ну это не вечный двигатель там трушиеся детали потшибники , идея очень интересная можно было ещё конденсаторы накапительные присандалить
@@blade2680 я о такой идее еще в 10 лет задумывался, но потом выяснил, для того что бы такая схема работала у генератора КПД должен быть выше 100%, а при нынешних технологиях это пока не возможно.
Вообще чёртов гений
Где 3й провод?
@@vik-uiktorovish На столб высоковольтный идёт :)
se puede construir con alternador 12v 180ah? Gracias por el video es muy interessante
What Kind of Magnets did you use for IT?
you didn't even watch to the first 5 minutes, lmao
Quando alguém descobrir a energia infinita (se é que exista), ninguém verá vídeo no UA-cam ou em nenhum outro lugar, será guardado no cofre mais seguro do universo, e seu inventor o ser humano mais rico das galáxias.
Seria a maior invenção interplanetária de todos os tempos.
(EI=0)
Bom, eu não sei exatamente o quanto produz o modelo que ele fez, porém o conceito é real.
Você nunca pensou que a força mecânica, gerada por um motor elétrico, pode ser utilizada para mover o eixo do gerado e por sua vez o regador produzir uma quantidade X de energia e alimentar o motor com uma porcentagem nemor em relação a produzida?
@@Appachee redescobrindo a roda... Kkk
@@Appachee , Matava aula de física né amigo?
@@sempreame , por que?!
@@icasmieresneto , me dê um exemplo comercializado
This was my idea back in my youth but I was going to put it on a bicycle. Everyone said it wouldn't work but I had faith. You, sir, have restored my faith again.
good for you. Don't let the laws of physic crash your dreams. Who needs science when you have faith!!11!!1
such an inspiration right now you are! :3 thank you i needed some energy to keep going!
keep dreaming
@@matteloht Those laws are words said by people, and we live in a world full of lies.
@@diego432hz Nope. Those laws are theoretical concepts and mathematical equations written down by scientists that are continuously proven, checked and tried to falsify by other scientists and students. You can't get closer to what is commonly called truth than with the scientific method. Everything else is just assumption or opinion.
You solved all our energy problems! I will build my own to drive my Flux capacitor…
Sage nur hast du schon mal einen Wirkungsgrad über 100% gesehen. Nein das gibt es nicht. Soeinfach ist das. Kannst dir die Arbeit ersparen.
永久機関凄い!本当ならもっと広めるべき事ですね。
Better not I think
Фиг его знает, все таки закон сохранение энергии существует, реально 5 минут работает дальше идет затухание, 知りない
信じられないですよね…
@@hsysk1697 信じるない
Yes it is true because our universe is electro-magnetic and very much alive contrary to mainstream
Very interesting and revolutionary experiment, I will soon experience it. Only two things to ask, the characteristics of the magnets and a test of the alternator under a 4 kw load. Thank you
Yes, it it a very revolutionary experiment. Maybe you should ask this question instead: why is the output of this magic machine exactly 220V at 50Hz? Not only the machine it generates infinite energy but also generates exactly what the you need to operate your appliances . Have you checked other videos made in the US where exactly same machine manages to generate 110V at 60 60Hz? Really impressive. Maybe you should study basic Phyics to understand why this is only possible on youtube and not on real life.
@@ampac will give my answer after I get it. tried out
@@ampac You never seen those office desk toys that spin and suspended in mid air, that's using magnets. I think this has been designed so that the magnets provide the energy required to keep the motion going once the motion is going the motor does the rest, provided that you do not go above what is being generated it should keep going!
@@ampac It is because the black motor is in real working as the generator and the lightmachine is just providing the motion. The sense of replacing the lowbob-magnets from lightmachine with neodym-magnets, is just to make the lightmachine much more efficient.
It is connected by plug like as would the black motor be the motion providing motor, but it is just a confusing illusion: It is vice versa. The black motor and lightmachine are parallel connected together, so i can understand that it is optical confusing, what is supporting what with what. This black motor (working as generator) has the net-specs of Europe: 220V 50Hz, so it deliver same specs, if it reaches the required rpm.
If you would use an american 1-phase e-motor, your output will be logically 110V and 60 Hz, or whatever your usa-netspecs are. Your output is ever same like the requirement of the motor, which is used as generator.
If you would do a smaller experiment, where you are using a 12V DC-motor as generator, your output would be 12V DC. Do you understand? :)
Just try it out, it works. Save the net-energy and reduce your bill from your electricity provider. If you do not try and find it out, then it is your own loss :)
@@gabrieledeidda5213 This has been tried out dozens of times by dozens of people. Only works on youtube.
Great, i always wanted to use my drilling machine on a field!😂
How can this be? What is the energy being converted from, and what will run out and need replacing and when (i.e. how long does it last?). Thanks.
Can you provide a link to the magnets you used, please?
Why did you force north pole to north pole and south pole to south pole?
I think most of the energy loss is when he did this video and put so much time and work to make it look real. Or maybe it is a bigger lost for me who watch it XD
Non, il y gagne par les pub, vu le nombre de naïf qu’il excite 🤣
Добрый день! Очень понравилось видео. Подскажите где Вы купили такие магниты?
AliExpress
the average home requires 10k watts of power so this device per home would eliminate the need for the grid but I am still skeptical given its scale and my understanding of electricity etc. I have always thought of this when i was younger having worked on cars since i was a kid etc but i guess it makes sense given what was removed from alternator (likely to keep us from doing just this) lol.
Thank You for this video and the ideas contained within. Please start all these video's off with a true statement: Nothing is free...nothing. However, there are ways to generate one's own electricity, some ways are doable, some are not, some provide costs savings, some do not save anything or reasonable.
No one said, that energy comes from nothing. The fact, that you don‘t know, where the energy comes from, doesn‘t mean it can‘t exist! Make research and build your own device. After that come here and make comments full of sense.
Either black goles exist and the energy preservation law is wrong as a single mom, or black holes dont exist at all.
@@johnwayne9103 Having worked at NASA years ago, and having visited the majority of America's national laboratories, I do believe in energy sources that up unit know angered others as they thought others were crazy to even think they existed -- yet they do exist.
John Wayne, pls, do not embarrasse your self in here as this forum is such a open platform to establish a personal lack of knowledge about the laws of physics!
Please explain where the energy comes from in magnets that continuously do work and atoms that continuously power themselves?
It works without any modification to the alternator. Just put an Inverter 24V to 220V 5000W to the output of the alternator. The Inverter is also much cheaper than the Neodymium magnets and more reliable! Also you can use 24V/100A or 150A alternator. 200A is hard to find and is very expensive!
Πάμφθηνα είναι.ρα έχουν μέσα όλες οι κεφαλές σκληρών δίσκων.αλλα ο Έλληνας ξέρει πάντα καλύτερα.
Wouldn’t it need a battery source to electrify the electromagnet, otherwise it wouldn’t generate electricity right?
Is there a website where someone can buy this pre made?
I’d like to buy one already made myself! Do you sell them?
@@markmarkin8478 no just looking to see if people make and sell these because in the future it might become handy.
congratulations on the project. you can make the list of materials available.
Can't you buy the motors with magnets already in them? Any chance you have a set of written blueprints with a material list? I will buy it. 😁
Could you tell me what is displayed on the motor tag . It looks like a capacitor start single phase just looking at it. Can you show a wiring diagram of this project ?
good luck with that xD
He already gave you that idea he didn’t need a diagram he showed you right there..
You just need to plug the input of the powerboard into one of the spare output slots on the same powerboard so it makes a loop. Then you get power to the other unused slots on the powerboard for other things to use. Simple really.
@@johnny90nine Yes, regarding to the "Laws" of Physics, it should be Indeed. But in any case, it makes us to come to watch and comment, and for sure, then the "Laws of Marketing" do apply! What do You think ;)
@Rod Weeks what is ..., in your view: my Comment or the Video Claim! ^_^