Це відео не доступне.
Перепрошуємо.
Springfield Echelon Magazine Issues? Easy Fix!🔥
- Додати в
- Мій плейлист
- Переглянути пізніше
- Поділитися
Поділитися
Вставка
Розмір відео:
- Опубліковано 16 сер 2023
КОМЕНТАРІ • 76
Наступне
Автоматичне відтворення
How Deadly Is .380? Is It Suitable for Carry?Garand Thumb
Переглядів 3,4 млн
Echelon Magazine Disassembly/ReassemblySPRINGFIELD ARMORY
Переглядів 16 тис.
How to Clean the Springfield Armory EchelonSkull Crush Inc.
Переглядів 13 тис.
Битва умов. ❤️ПІДПИШИСЬ! Андрій Попик. чат рулетка.Андрій Попик чат рулетка
Переглядів 469 тис.
РЕЙНДЖЕРС - ДИНАМО. Ліга чемпіонів. ПРЯМА ТРАНСЛЯЦІЯFootball Hub
Переглядів 458 тис.
Gli occhiali da sole non mi hanno coperto! 😎Senza Limiti
Переглядів 10 млн
Буданов про плани на Курську область, та Воронеж #shorts #курск #воронежАпостроф TV
Переглядів 2,4 млн
ECHELON TRIGGER KIT123powderriver
Переглядів 12 тис.
Installed Lok Grips on sig p226 xfive legionC. Chen
Переглядів 586
Springfield Echelon - Be careful!Rally Tactical
Переглядів 26 тис.
Here's how I've not shot myself in 20+ years of carrying a gunTenicor
Переглядів 504 тис.
Quick Unboxing and review Springfield Echelon is it still relevant worth the moneyBass n' Bonsai
Переглядів 6 тис.
12 Best Springfield Echelon Holosun Red & Green Dot SightsFreedom Gorilla
Переглядів 30 тис.
How to Remove and Disassemble Springfield Armory Echelon StrikerUBR Arsenal
Переглядів 4,6 тис.
#10MinuteTalk - How to Shoot a Pistol with Jerry MiculekVortex Nation
Переглядів 302 тис.
How Deadly Is A 22 Pistol? 22 Pistol vs HumanGarand Thumb
Переглядів 7 млн
КУРСЬК, СПИШ? | Упс, а що трапилось #75Aleksey Durnev
Переглядів 774 тис.
ЛЕТНИЙ ДЕНЬ ТВОЕГО ДЕТСТВАSIDELNIKOVVV
Переглядів 1,6 млн
Кадиров пішов НА ПЕРЕГОВОРИ із ЗСУ? АХМАТівці ТІКАЮТЬ! Київ захоплює НОВІ МІСТА РФ | НОВИНИ СЬОГОДНІУКРАЇНА СЬОГОДНІ
Переглядів 519 тис.
Яшин - интервью после тюрьмы / вДудьвДудь
Переглядів 8 млн
Вони ЛЕДЬ ХОДЯТЬ! КЕП в ефірі сказав ТЕ, про ЩО ВСІ МОВЧАТЬТСН
Переглядів 762 тис.
РЕЙНДЖЕРС - ДИНАМО | Ліга Чемпіонів. Кваліфікація Q3 | 13.08.2024ФК «Динамо» Київ
Переглядів 332 тис.
«Путін почав це, надеріть йому зад»: американські сенатори про операцію ЗСУ в Курській областіРадіо Свобода Україна
Переглядів 683 тис.
ПЕТРО ЧЕРНИК ПОВЕРНУВСЯ! Про Курськ, реакцію Путіна та стратегічний переламСпецпроєкти Сергія Мамаєва
Переглядів 172 тис.
Well done sir. Quick and straight to the point with easy instructions. We need more guntubers like yourself.
😂 Sooooo many people need to see this.
I had already seen another video showing the same thing, so I already knew the fix, but apparently A LOT of people don't know and they need to see your video, so I liked it and I'm commenting to help the algorithm. Fortunately I hadnt shot it yet, so no magazine malfunction for me. 😁 The Echelon is my first gun purchase ever. I've been looking for months and thought I had my mind made up with Canik, but when I saw the Echelon, I knew it was the one. Now I need the Holosun SCS 320. It fits it like it was made for it.
My local gun range has this to rent free if you are a member. Obviously, I got my free rental yesterday and shot 50 rounds through the Echelon. It had my curiosity but now it has my attention. Grip was amazing and very accurate. Will be picking up one soon.
The Extended magazine that comes with gun shows how that part is outside of the magazine which should alert everyone how it should be.
I think the problem is that more than a few of the magazines came factory assembled wrong… mine was … glad the fix is so easy .. i literally had this happen to me .. i tapped that base plate loading the mag and it popped off and ammo dumped everywhere and the spring shot out …
Very helpful tip man. I am looking into the Echelon or the XDM Elite 5.25. Was very skeptical because of the mags falling apart on the Echelon. Might be considering it again now that I see its user fault and not the factory when they fall apart. Keep up the awesome content. Your great at showing what is needed and informative. 😎🤘
I don't know if you have made your decision yet but I just traded an XDM elite for an echelon and I am so happy that I did.
Bud I have one and have not had mag issues at all but I have not taken my mags apart either but could totally see me putting that back together wrong! The gun is amazing in my opinion! Was worried about mag issues but starting to think it’s a non issue!
Top tier Croatian gun
Classic Firearms just did a Echelon vs P320 comparison and the Echelon mag exploded when he inserted it lol.
I believe it. With the movement of the base plate, and quick insertion of the mag, its bound to happen.
That’s was a great super fast and easy fix to follow! Keep it up man!
I love videos like this. Thank you! I wish all UA-cam followed this “low budget- raw- straightforward” format. No like, follow, sub mention BS. Loved it. And guess what. I liked, and followed. Keep it 100 bro. I’ll check and fix my echelon mags when they arrive. Thanks again
Fantastic video!!!! I subscribed!!!!!!👍👍
Glad i found this video i can't thank you enough.
Glad I could help
Thank you!! I watched another video saying to put it on the inside. Ammo went everywhere. A couple times. Even at the indoor range. Glad it was user error. Make more videos.
They updated the online manual to address this a while back, i can see how if youve put mags together for years that this would be easy to do wrong.
This gun is on my wish list.......
I just got it today and put 125 round through it. Had one problem and that was my fault cause I kept looking and the round and it jammed. Not the guns fault it was mine cause I was so happy to play with it. Worth the buy
I wish that was all the problem. I just had one of my magazines lose the bottom and throw bullets all over the range yesterday. The extender of the magazine is fairly soft, and it tends to open on the sides, going off the rails of the bottom of the magazine. When I put it back together, I could see how there was a small separation on the sides of the magazine extender, about 1 mm, but that's enough to make your bullets fly when you are putting the most pressure and loading that 20th bullet in you magazine. I opted for removing the extender and mounting the flush magazine plate.
Who TF thought having that flange OUTSIDE the mag was a good idea???
I also was thinking this
I wanna get this gun but the magazine blowing up made me think about it again this video reassured me
I just brought this gun and that was one of my main concerns but I was fortunate enough to not experience this because the difference in the back of the clip is noticable so just correct the position to match the original 🤯 lol
Thank you so much. I assume you figured this out by making it look just like the other one that came with the extension already attached. Thanks for helping the rest of us that were over thinking the heck out of it. Who would have thought the plate goes on the outside?!?! No other mag does that. I wish I’d have been smart enough to look at the other magazine, first. Feeling stupid. Thanks again.
While it looks goofy, if you analyze it, it's logical because that way the floor plate can't possibly move forward.
Looks dumb
Works simply
Top tier 1st time poster. I hope to see more vital posts. Any plans on doing an Echalon review? Your cell camera did a great job. Good resolution after zooming in a good amount. Budget does not mean inferior.
Thanks. Filmed on an older iPhone, lol. I may do a review. I was really more interested in passing the info to the community.
I had the same problem with some extended Sig mags, same fix. Apparently, someone at the manufacturer doesn't know how to do the job correctly
Thanks for the information on how to fix the problem
Thank you for that it really helped
Thanks so much for posting a vid on how to fix the problem.
Go figure, install it correctly and it works. Wow what a concept.
Quick easy straight to the point
Thank you so much ❤
Don't have that gun but appreciated your video. Thank you.
Thank you!
I want to say thank u so so much. I went to a gun range and i went to load up to save time. And when i loaded it. I do want to say thank u
Excellent vid, hopefully many people see it
Thank you for posting!
This was great! I was seriously considering getting the Echelon over a PDP and then all the problem vid started hitting YT. After this video I think I'm back to it as my next purchase.
I guess my question would be to Springfield Armory as to why the tabs aren't on the outside coming from the factory?
The correct way is the same way that the factory 20-round mag is assembled. I don’t know why anyone was confused.
THANKS
thank u
My next gun, good timing. Thanks!
There's definitely something not right with at least some of the magazines. Just yesterday i had one come apart in my pocket and after putting i it back together it did the same thing again today. Maybe I've just got a defective magazine?
Thank you for this.
👍 got it !
What i did. Good job now people can stop whinning. 👍🤙👍
I'm wondering if the 17& 20 rounders both come with the same length spring. Have you ever counted the coils on both? Heard stories of the 20 rounder jamming, and low spring pressure might explain it.
So.. the fix, read the instructions. Don't be dumb. 😂
hahaha. Yep. Even funnier is that after having problems with the mag, people still didn't read the manual, and posted negative reviews for content
Even easier fix don't buy the this trash side arm
@@jaytearsofblood2879- true. Glock got it right and they been doing good. If you want a gun like this. Change out plastic sights is basically the only upgrade you need to do for glock.
That's dumb. Why didn't Springfield just make the tab wider so it's obvious.
Even with this option, tap it hard enough and guess what? It’s like a jack in the box. Spring, follower and 20 rounds go flying everywhere. SA is aware of it and waiting on a fix.
Interesting. Do you have the gun, and has this happened to you? Would you be able to post a quick video showing the base plate installed correctly, and the hard tap causing the round to fall out? If so, I will take this video down. I wouldn't want to spread misinformation
I have the gun the only way it explodes is if installed incorrectly or overload the magazine. The magazine will accept 2 more rounds but if it bumps anything it will explode
Great Video!
Good looking out 👍
Is this why people's mags were popping open during testing?
people need to read the manual
thank you
Haaa....of course...i got it right the first time. Its common sense, right lol😊
Good video. I just bought one. The reason I knew this trick was because I change allot of my baseplates out on other weapons
There’s several people experiencing the follower getting stuck and causing malfunctions. Any update on what to do?
yes. Install the base plate as I did on this video. The spring is binding because of the movement in the baseplate.
@@derekwest2 my follower was binding even with correctly installed baseplates
@@willschaust7978 It shouldn't. Remove the floor plate and move the follower (with the spring attached) up and down on the mag body by hand. Feel for binding while moving it up and down. If you don't feel any, more likely than not, the spring is in the incorrect orientation, or the has bent during the assembly, disassembly. Good luck!
👍
😎
if you want a modular pistol, just get the sig p320 its better in every way
Thanks! This is probably my new favorite gun
Well shit just got one last week and was trying to figure out what the hell I did wrong, and now I know just this little piece of the puzzle. Oh yeah the pistol is awesome love it.