Whirlpool Ice Maker Not Making Ice. How To Troubleshoot Your Ice maker.
Вставка
- Опубліковано 9 січ 2019
- Is your Whirlpool ice maker not working? Here are some steps to follow to help troubleshoot your ice maker.
If you have any questions about your ice maker feel free to leave a comment and I will get back to you.
Thank you for watching, and I hope this video helps. - Навчання та стиль
You saved me from buying a new ice maker. None of the other videos mentioned pushing the door switch. As soon as I did that the cycle started. Now it works. Thank you! Let me send you a 9v battery for that smoke detector. Lol
Dude, I was looking around my house when I heard the beeps 😂
Ditto.
Me too.😀
I got a new maker. Jumper does nothing even with Door switches pressed in either position.
So no power I guess.
Bad fuse maybe?
Bad sensor?
How to test those?
Great advise. I set up for the test cycle and I am waiting. Here is a tip. You can use your digital multimeter as a fused jumper if you set it for amps. Only thing….. Chang the battery in your smoke detector 😁
My dogs are scared AF right now. Fixing an ice maker and can't change a battery? Fuck off.
I heard the smoke detector also.
I watched several of these “fix it yourself” videos for ice makers and yours is the only one that is worth a damn. Thanks
What if the water line that coming out is frozen
Excellent! Thanks for the straight-up explanation and footage of the operation and test procedures on this. You are about the only resource that actually sheds decent light and makes good sense! The whole Ice-Maker thing is pretty simple, once someone explains it. Most other resources don't mention anything about the freeze/temperature sensor, and how slowly the ice ejector turns, and most importantly how to trigger the testing of the ice ejector and the water-fill cycles. Now that I know how all that works, it's obvious how to determine what's actually wrong. Cudos my good man!
I’d like to thank you for this video. Your instructions literally saved me from buying a new ice maker that I thought was bad. I had watched another video that left out one very important step which was “pressing the door switch”. When I tested the ice module with the jumper it did nothing, so I was going buy a new one and then came across your video. Turns out I just needed to reset it due to a power outage. Thanks again!!!!!
Thank you sir! I used the info in your video to test my ice maker. Found out the water line was froze solid. 1 min with a hair dryer and she was working again. You saved me a service call. Great job
Very informative step by step instructions. I felt comfortable trouble shooting my ice maker after watching this video, thank you.
Best ice maker troubleshooting video I’ve seen so far. Thanks for the tips. I’m starting out in the Industry and this was very helpful. 👍
I must have looked at 15 DIY videos before I found yours. It worked like a charm. Thanks!
Rock on man. This worked. My problem was our Motorhome ice maker. Just bought the RV and they pushed antifreeze through it all, well antifreeze wouldn’t freeze for some reason in the ice machine 🤪. So I could get it to move to the next cycle to get more fluid in to flush the line back out. Thanks man. Your a blessing
Yes INSULATED wire jumper! I got quite the jolt this morning testing mine. Still no ice,but got to get to work. Will try again tonight. Great video. Thank you!
I have the same exact fridge and icemaker everything exactly the same. After I jumpstarted it, it worked like a charm! It wasn’t harvesting after I unplugged it to defrost the freezer drain hole. Thanks so much!
This video did the trick! My icemaker stopped working... and the owners' manual did not give enough information. With a little jumper wire I was able to check the functions of the icemaker. I am checking the temperature of the freezer compartment, to make sure it is at the proper level (0 degrees). Thanks!!
Thank you very much, changed my old ice maker for a new one but wasn't taking in water so tried it your way to make sure it would take in water but no one else said anything about the door besides you. It works thank you very much, the door switch made it work after trying it so many other ways without any luck. Great job.
Thanks, after all your tests it turned in a frozen tube that enters the ice trays. You saved me a ton of money. A new subscriber
Mine is doing this. Water freezes in the tube and none gets into the icemaker. What did you do to fix this?
Great video, very informative. Gave me all I needed to know to test and see what the problem was, without randomly replacing parts.
Wow, this was a great video and I just repaired mine! The jump was what it needed to start the mechanism. Thanks! Saved me some repairman bills.
Great video! I had to thaw out the frozen drain and had to disconnect the ice maker. Nothing was happening after I reconnected. You're tips helped me in knowing the ice maker is operational. Just waiting for the freezer/fridge to get to temp. Thanks and God Bless!
Thanks for posting. I replaced my main water valve on the bottom back. It was not cutting off, was filling the ice holder up. What I found is that when I took the cover off of the ice maker up top, it was caked with ice preventing the dial from turning. I got a long BBQ pit lighter and carefully melted the ice away....so I never got a chance to use my test wire jumper since it started cycling as soon as the ice was cleaned away. The arm went up and down, the tray filled now waiting for a test dump...Thx again for the video, the poor man ribeyes looked good too!!! I've tried those before!!!!
Many thanks! Great explanation of how to troubleshoot a faulty ice maker. You gave me the confidence to successfully figure out I had no problem with the water flow, but I did have a burned up ice maker.
Thanks, this is excellent!!! Very comprehensive explanation and examination of the ice maker unit! Fantastic, thanks for taking the time to make such a terrific presentation.
You saved me money. I stuck a wire in both those circuits and it worked like magic. Where do I mail the chuck steak?
Glad I could help!
Thanks!! You saved my sanity. We had a serviceman come and replace the thermostat last week & have had no ice since. I think somehow(?) the gear was frozen stuck but the test cycle seems to have freed it up and I’m hoping that’s all it was. It didn’t spin @1st which confused me bc I’d poured water in the tray & it had produced ice last week, but then it started (maybe the heater coil got it freed up). Either way, this video is A+ 🌟
Thanks for the vid, muchuv! My icemaker siezes up when I dont use it that often. I come back to this vid several times a year, because my old brain cant seem to remember "T" "H" Bridge 🤣. Thank you for saving me and many others a bunch of $$$ 🤟
Bro…Much love and appreciation with the advice you gave me. Helped me and my family save money and time. Don’t usually leave posts, but this time, had to reach out and show my respects. “Thanks again bro, God Bless”…!!!!
I followed the directions exactly as you said to make sure everything was working. OK, you did a great job. I waited then 24 hours and the refrigerator started to make ice again. I know that maybe the water line could have been frozen. So leaving the refrigerator off for await may have help. But because of your video I knew the ice machine was working.
😊 Thank you.
Thanks for the helpful video. Our maker quit after an 18 hour power outage. Started right back up after making it cycle.
Very informative and easy to understand! Thanks!!
Super helpful with the jumpers and door switch, thanks!
Thank you! We had more than 2 wires that were cut! Such a design flaw. The sears service tech suggested we buy a new door at $1,200.
You Da Man, Excellent trouble Shooting Video, don't have to remove back, to test coils nothing, come to find out, with the Jumper wire, water is working, but ice make is not activating ! Thank You very much my Man !
Mine the water valve worked, but the little white wheel failed to turn meaning harvester no good??
Thank You! My ice maker is working!!!!!! Thumbs Up
Great tip on jumper, love the hint about chuck-eye steaks!
Fantastic! You saved me from paying you to come out to fix it!
Great video. For a moment I thought that dead battery sound from your alarm was from my house! Lol.
I've watched a few videos on testing/repair of the icemaker. What made yours great was the testing of the valve from the head end. No other video has said that. This weekend i'm going to replace the filter on my gf's fridge. Then we will see if the new icemaker and valve work. If not i now know how to test it. Thanks so much.
The door switch trick!!!! Perfect.
Great, thorough! Hopefully avoids costly calls for me !
Thanks for the video. Had ice in the ice maker, but wasn't coming out. Did the jumper wire trick and the arms started turning. Hope that does the trick and no more problems...
Thank you for this. I had an issue where my ice maker was stopped halfway through a harvest cycle and it was just running water into the ice bucket and flooding the floor. I replaced my ice maker out of hand because it was getting limed up rather than trying to fix the one I had. After replacement the ice maker wouldn't move when the power was turned on. Nothing happened, no water and no cycle.I called Whirlpool and the tech support couldn't help me troubleshoot the problem. I asked if there was a way to force a cycle and she was clueless. She wanted me to call a repair man after spending $150 on a new maker. I said I would figure it out on my own. I started searching youtube and found you. The information allowed me to discover that in addition to a bad ice maker the coil on the valve had also opened. I assume it was because it was energized for over an hour before we discovered the flood.
Thanks for extra testing information of valve, switch and such. very good.
Best video I found about an ice maker like mine. U saved a DIY guy some money!
Thank you so much for this video! So helpful!
Big Help!!!! Thank you for sharing!!!
Thank you for such detailed commentary, I HAVE ICE.. 🎉
Thank you so much for this video! I know my ice maker is good and is cycling. However, I replaced our inlet valve last June and now it is no longer making ice. Now I know how to check if the valve is working properly! You Rock! Thank you so much!
Your welcome! Good luck on your repair!
@@appliancesifix7347 What the hell you doin' givin' out the Chuck Eye secret? lol. The reason why they're cheaper than Rib Eye's is because not as many people know about them, so there's less demand for them. I think they're actually better than Rib Eyes myself. Obviously I was just joking with you, but there is some truth to it. As more and more people find out about them, the price of them will keep going up until they match the price of Rib Eyes. They are very rare, as there are only two Chuck Eyes per animal, so it wouldn't take much publicity to cause them to become almost unobtainable.
So I'm in need of help! My fridge stopped working and I replaced the motherboard, but now my ice machine stopped working. I changed the filter and was trying to look into the rotator. It is not turning and I do not have copper wire...is this something I can turn with my hand?
@@appliancesifix7347 hey if you are still working on appliances pls help me! I commented on the bottom. I don't know what to do and I'm thinking I might need to go buy a new fridge.
@@jennyendara5 Hey Jennifer what's the refrigerator doing?
Thank you. Your video helped me. The steak thing was a good addition to the video!
Great and thorough video. Thank you.
Great information. Mine was only froze up and a hair dryer solved it, but I was able to check everything before thawing out with hair dryer.
This was great thank you for the assistance!!!!
Great video. The Lord bless you. 🙏😇
thanks man! super helpful and good camera work with one hand
Thanks bub. From an old Sears tech. Cheers
Thanks for making this video!
Your a genius man ! Thanks so much. I guess mines was just stuck ? Making ice again now !
GREAT video! Thanks
Very helpful. Thanks for the tips
I'm having the same issue this video helped me big time
Good stuff! Thanks for sharing.
Thanks so much this was such a big help for me. Fixed it myself!❤
Thanks, this saved me a whole lot of headache
Thank you buddy! Great info!
How universal in that smoke alarm twerp!! LOL... Thanks for the video !!
excellent ! Rite to the point. MANY THANKS!
Great video! Thanks for showing the testing procedure. Next up ---> How To Troubleshoot a Smoke Detector 🙂
Thank you for video of how to check a few things.
Hi I believe the arm for the ice was locked as you said. I hear the ice maker working thank you 🙏
Great Video!
Thank you!!! You saved me. This totally works. Liked and subscribed
Great video. Spread the love for Chuck Eye. Found out about 5 years ago & love it more than any other cut now. Of course this artificial 'inflation' has driven them up from $6 for a pack of 2 to almost $12...
THIS WAS SO DIRECT I AM NOW GOING TO TRY.
Woo Hoo! Something that actually worked!! Merry Christmas!!
Merry Christmas
Excellent and fantastic. Thank you sir.
Thanks man your a life saver. !
Thanks for your help.
Thanks very useful video
Thank you for this information I'm about to try these tests. I'm not getting full ice kinda hollow on most. I think it's a clogged water line since I have hard water in Texas. My fridge is well over 25 years but don't want to buy a new one just yet.
Thanks for this video, easy troubleshooting
Thanks for the info vary helpful. And by the way I have been buying chuck eye stakes for15 years I like them just as much as a rib eye.
Good video. Sounds like one of your fire alarms is asking for a 9 volt. :)
Don't tell Adam Corolla. LOL
I thought that was my house, I was about to get up and start looking for it LOL
Thanks a lot for your video. You are really good.
Wow your awesome you explained it perfectly
Bigtime. I love you😘😘😘thank you SO MUCH, U R THE BOMB☝👍💁🏻♀🤷🏻♀🤦🏻♀been so frustrated, u really did help me out ALOT, THANK U.❤
Excellent job
Came for the ice maker tips, left with a new steak recommendation! Thanks brother
Hot and fast over flame or in cast iron...Chuck eye are good as Rib Eyes
Dang that’s awesome advice thanks bro I’m definitely going to follow you
Thank you for making this video!!!!!!!!!!!!!!!!
Thanks for the video and explanations. I had a bad water inlet valve. When I jumped the V & L terminals, no results. I replaced the valve and tried jumping again (with the arm in the ON position) and shorted out the fridge/tripped the breaker. I reset the breaker and everything is working fine now. Any idea what went wrong? I used a thick paper clip to bridge the V & L Terms... Thanks.
Awesome vid!!! Thanks so much
great vid, thanks!MY HANDLE, the near the door got disengaged (bottom drawer WP freezer), i put it back in but its limp, does that mean i need a new unit? how much is new kit2fix?
Great video thanks again
Great video !
Great video my friend.
Nice video! Thank you! Slight process step I'd like to add. After jumping T and H and seeing that the motor did not move, I was ready to order a new ice maker . . .BUT something told me not too. So I checked the valve and it was working fine. Finally I just looked inside the water tray and saw that the fingers were stuck on some ice that was built up. Using a knife, I freed up the ice, and lo and behold, the motor starting turning. Ice maker working just fine now.
Reading your comment may have saved me any further steps! I got a flashlight & saw there were 2 ice cubes stuck behind the teeth mechanism, next to the freezer wall. I was able to remove them w/out a tool. I sure hope this was the problem. I can feel the top of the loaded ice. Hopefully, they will be able to be released, now. Thanks for the comment.
I use a hairdryer if to much ice freezes & blocks teeth
T & H , V & L Thank you. exactly what I needed to know about that ice module see if the motor is running, and water pouring. the n digging into the pump in the back, if iti s the pump I will switch it of the water despencer to ice then I know I need a new pump.
Thanks for the info. My ice maker is working but not getting water. Going to check supply vavle for continuity.
Is that the Smoke Detector chirp in the background, if it is time for new battery.
Hi Appliance Fix: Great video. Is there a way to ensure/check that the water inlet valve is operational after determining that the icemaker and control module needs to be replaced? I found a broken plastic piece that the bail arm attaches to when I took the control module out. So at this point I will need to replace the control module or the complete icemaker. What would be your recommendation? I am hoping to avoid purchasing the water inlet valve if it is still good and supplying water to the icemaker. thank you
Dode. Informative video. Now change the batteries in your smoke detector
That "temp sensor" that you pointed out according to the manufacturer is a thermal fuse... The sensor (thermostat) is actually attached to the ice mold on the front hidden behind the controller/timing unit... according to the manufacturer... Note: I am not a repairman just a DIYer so I may be wrong. Other than that, Thank you. Great trouble shooting info!
thanks for sharing.