Hi this is a very small engine which usually used at small or light boat. So I don’t recommend to install it with steering. But I do think that it is able to be installed with steering and cable.
I think you are focusing on the wrong area. Instead of that little piece on the bottom, put sound insulation around the inside of the main engine cover. Also try to find a muffler for the air intake.
great idea ....thanks for sharing .... hangkai 12 hp so far so good ? i thought of getting one of this 12 hp 2 stroke outboard for my 11 foot aluminum jonboat ...would be great if you could share your opinion on this outboard , thanks
Hi Leon, thanks for your comment. So far, it has been a great experience with this motor. However, the main concern is that it lacks anode whereby it has only a tiny rectangular one right above the propeller. So, when I use this motor at saltwater, the anode did function and eroded as it should be. But, the erosion also happened at the surfaces where bolts and nuts are in contact with the motor body. This is because there is no painting to protect the motor body. Hence, I just ordered different model anodes and I will share another video on how I would modify the 3 anodes after seeing my friend's 15hp Mercury anodes. Stay tuned!
@@leonwong3631 I have just uploaded the new video regarding the anode upgrade and repainting of my motor. If you free please watch it. Thanks for supporting me!
Салют! Чувак, ты конечно молодец, очень старательный и скурпулезный, так аккуратно все сделал, но... Но эту пластиковую штуковину правильнее всего снять, покрасить в жёлтый цвет и выкинуть. Правда, правда, этот пластиковый кожух там совсем не нужен. На оригинале Tohatsu 9.8 hp такого кожуха не устанавливалось никогда потому что он там и ненужен.
Hi Afendy. Ni tak yah lock masa reverse. Masa gear reverse masuk ada satu pin yang akan otomatik lock engine supaya ianya tak terlipat ke atas sebab throttle terlajak besar tiba-tiba.
mine after a year plus, the magnet coil has given up, the cdi also. the paint job also gotten worst. mostly salfwater usage but only few times. maybe if you any ideas how to redo the paint job can you share in a video.
The only quality issue is on the rust buildup on body due to small anode. I have another video on how to upgrade a bigger one. Please browse through the playlist. You should be able to learn something from it.
Nice sharing master
Can try bah...hahah!
@@k-razzybuilt8467 will try it 🤠
Great Job will you a video on where you put your oil in the bottom n top as i might be getting the 6hp no videos youtube i dont see ,thanks again😊🙏
Ya. I never done the gear oil change either. If I have the chance to do it, I’ll definitely post a video on that.
@@k-razzybuilt8467 thank u bro🎣
Stadey sound enjin 12 hospower👍👍👍
Thanks bro
Terbaik sifu
Terima kasih bro!
Hi just wanna ask if this type of outboard..can install steering wheel and cable?
Hi this is a very small engine which usually used at small or light boat. So I don’t recommend to install it with steering. But I do think that it is able to be installed with steering and cable.
so did it work? Doesn't seem like it did anything
I would say 20% improvements. Meaning there is slightly lesser sound produced after I installed the sound isolation.
I think you are focusing on the wrong area. Instead of that little piece on the bottom, put sound insulation around the inside of the main engine cover. Also try to find a muffler for the air intake.
Good idea. Will try in the near future.
great idea ....thanks for sharing .... hangkai 12 hp so far so good ? i thought of getting one of this 12 hp 2 stroke outboard for my 11 foot aluminum jonboat ...would be great if you could share your opinion on this outboard , thanks
Hi Leon, thanks for your comment. So far, it has been a great experience with this motor. However, the main concern is that it lacks anode whereby it has only a tiny rectangular one right above the propeller. So, when I use this motor at saltwater, the anode did function and eroded as it should be. But, the erosion also happened at the surfaces where bolts and nuts are in contact with the motor body. This is because there is no painting to protect the motor body. Hence, I just ordered different model anodes and I will share another video on how I would modify the 3 anodes after seeing my friend's 15hp Mercury anodes. Stay tuned!
@@k-razzybuilt8467 thanks bro for sharing your thoughts
@@k-razzybuilt8467 WAITING FOR YOUR ANODE UPGRADE VIDEO
@@leonwong3631 I have just uploaded the new video regarding the anode upgrade and repainting of my motor. If you free please watch it. Thanks for supporting me!
@@k-razzybuilt8467 ok bro TQ so much
Could you tell a difference in the sound? To me it sounded louder after in the video.
A bit softer. But no really big difference.
Салют!
Чувак, ты конечно молодец, очень старательный и скурпулезный, так аккуратно все сделал, но...
Но эту пластиковую штуковину правильнее всего снять, покрасить в жёлтый цвет и выкинуть. Правда, правда, этот пластиковый кожух там совсем не нужен.
На оригинале Tohatsu 9.8 hp такого кожуха не устанавливалось никогда потому что он там и ненужен.
Thank you so much for the compliment. I really appreciated it.
You think this would work on a 20 inch transom?
Transom height for this engine is 440mm or 17”. I don’t suggest to use as the propeller will be higher than the boat base.
@@k-razzybuilt8467 nah I built a reverse jack plate lowered it 3 inches and it works fine.
@@BassBashin Wow! What a creative idea. Can you share me some photos or videos? Do you have a UA-cam channel?
@@k-razzybuilt8467 I do. Don’t have any videos of it yet but I’m working on it lol. I did it the cheap way but it still works
@@k-razzybuilt8467 I do have pictures but we can’t message over UA-cam.
Bro boleh tunjuk cara lock enjin masa reverse
Hi Afendy. Ni tak yah lock masa reverse. Masa gear reverse masuk ada satu pin yang akan otomatik lock engine supaya ianya tak terlipat ke atas sebab throttle terlajak besar tiba-tiba.
Byk beza tak bos lepas psang ni
Ada beza ketara. Bunyi enjin dah jadi lembut sikit. Boleh cuba. 👍
@@k-razzybuilt8467 ade link untuk beli di shopee x bos? Sbp tak jumpa lgi yg waterproof
Someone faat.
Wow malaysia calendar
Ini macam pun tau ah! Mata ko tajam lah.
mine after a year plus, the magnet coil has given up, the cdi also. the paint job also gotten worst. mostly salfwater usage but only few times. maybe if you any ideas how to redo the paint job can you share in a video.
My paint job also chipped off a bit. Maybe I will see how to do repaint it and share a video of it.
How is your engine holding up now? I'm thinking about buying one for saltwater use too but I'm concerned about constant repairs and issues.
I'm thinking in buy oje for salt water to. How do this motors go on saltwater? They last long?
Looking for a kick motor for my lake boat. Please, any issue with quality of the Hangkai.
The only quality issue is on the rust buildup on body due to small anode. I have another video on how to upgrade a bigger one. Please browse through the playlist. You should be able to learn something from it.
Thank you for sharing
Thanks for supporting
How thick is the 3M pad?
It is a 3 in 1 sound insulation pad with 1 cm thick. The material consists of aluminum, butyl and foam.