THANK YOU!!! saved me time, money, and probably some really dangerous situations on the road. took me like 60 seconds to do something I thought I needed replacements for
Okay it’s official man...subscribed to your channel just now. Last couple of days the only Super73 Hack/DIY/Adjustment videos that seem to be the most thorough have been you. I’m sold. Subscribed 👌🏾 //Bklyn👑
Thanks for this information. I lost control of my ZG a few weeks back. Now that my wounds have repairs, I am checking all the 'unwanted modifications' to the bike - and your video has helped me realise what the rubbing sound is when I ride. It's great to see I can fix it easily. Cheers!
Brian man, thanks for all the hacks and DIY adjustment videos. I did the speed hack, adjusted my brakes, and now when my 36V 20ah battery arrives from Amazon ima do the dual battery hack ... and be all in these Brooklyn streets. You sir deserve every subscriber to your channel and more. Freddy, my Super73, says thanks too.😏 Brakes never felt better... //Bklyn👑
Wow, Thank you so much. My last ride with a bike was a bmx and that was 20yrs ago. And was struggeling to adjust the brakes. Tonight i heard a squeezin at the brakes. I use your method and i was done in 5mins.
Thank you for the video. I was able to adjust the front in 30 seconds. But I cannot get anything to fit in the back wheel. Even when I line up the cutouts from the hub motor I have no room to lineup my Allen key. Is there anything I can do ? Thanks for the help
Is there a better tool you can recommend for adjusting the rear break? I cannot for the life of me get this dang allen wrench that came with the bike into place enough to turn. Seems like the metal receiving slot is super easy to destroy as well.
Great video, thanks for the info! I’m having some intermittent power loss issues, and now total loss of power. Battery indicator light shows charged but no juice. Replaced the throttle button still no luck. Any experience with that? I’m so bummed that I can’t ride! Would love to get your advice. Thanks in advance!
Yes there is, one on each brake lever. To disconnect them, just fallow the smaller wires off the brake lever to the plug and unplug them. It's easy, takes about 1 min
Love your videos. Can you make a video of just routine maintenance for the Z one? Also, have you had any issues with cutting that white wire to get extra speed out of your Z one?
Hmm i didnt know you could do that. I would just loosen the 1 allen that hold the brake cable to the brake and pull cable a lil the tighten. Is this way not right? Seems to work fine
It's the same thing, take caliper off, turn allen bolt a half of a turn, reinstall and test to see if it helped, if not repeat the steps. Or remove the rear wheel and do the steps with caliper in place .
We're in a community with big gnarly hills that we love and they're crushing our brakes when the kids ride. This was very helpful. *What's the make/model of that blue bike in the background of your vid? It looks awesome!
For the back wheel using an allen wrench at that angle didn't work for me. Using a flat head that fits in the corner that locks it in works better for me.
THANK YOU!!! saved me time, money, and probably some really dangerous situations on the road. took me like 60 seconds to do something I thought I needed replacements for
Awesome!!!
Okay it’s official man...subscribed to your channel just now. Last couple of days the only Super73 Hack/DIY/Adjustment videos that seem to be the most thorough have been you.
I’m sold. Subscribed 👌🏾
//Bklyn👑
Thank you man, saved me a trip to the shop, and I also get to save my one-time free service for another day! Will keep this trick in the toolbox lol
Thanks for this information. I lost control of my ZG a few weeks back. Now that my wounds have repairs, I am checking all the 'unwanted modifications' to the bike - and your video has helped me realise what the rubbing sound is when I ride. It's great to see I can fix it easily. Cheers!
Hope your are all healthy now and bike is riding well, super stoked mt video helped you out ..
Brian man, thanks for all the hacks and DIY adjustment videos. I did the speed hack, adjusted my brakes, and now when my 36V 20ah battery arrives from Amazon ima do the dual battery hack ... and be all in these Brooklyn streets.
You sir deserve every subscriber to your channel and more.
Freddy, my Super73, says thanks too.😏
Brakes never felt better...
//Bklyn👑
Wow,
Thank you so much.
My last ride with a bike was a bmx and that was 20yrs ago.
And was struggeling to adjust the brakes. Tonight i heard a squeezin at the brakes. I use your method and i was done in 5mins.
That's great man, glad the video helped . Happy riding
Thank you I was off my bike for a couple of months and was bumming rides lol.
This dude has been a big help. What a hero lmao
Thanks for this! Incredibly helpful!
Glad it helped you
You just saved me time and money!!! 🙏🏼🙏🏼 thank you!
That was really helpful, thanks for showing me that
Glad it helped
It’s impossible to get the tool into the back wheel one without stripping it. Is there any other way
Take the back brake off the bike to get it loose, place it back on bike and make adjustments.
I am having the same problem. And I don’t know if I’m confident enough to take off the brake 😂. This is still a very helpful video.
@@GardenGateLawn it's easy, you can do it.
Helped out a lot! Thanks
Hey man great video. Having and issue getting the 5mm alan wrench in the screw over the rear hub motor. Worried I might strip it. Any suggestions?
try a 5.5 allen or tip the current one with a hammer to get it to set in a bit deeper, also make sure it is clean so the allen can go in all the way
Thank you for the video. I was able to adjust the front in 30 seconds. But I cannot get anything to fit in the back wheel. Even when I line up the cutouts from the hub motor I have no room to lineup my Allen key. Is there anything I can do ? Thanks for the help
Yes remove the brake caliper, and adjust it while off the bike. I believe the Allen bolt size is 4mm
Great videos. Great delivery. Thoughts on the Sur Ron in the background?
Is there a better tool you can recommend for adjusting the rear break? I cannot for the life of me get this dang allen wrench that came with the bike into place enough to turn. Seems like the metal receiving slot is super easy to destroy as well.
Not really, I'd remove the rear wheel and trun the screw 180
Great information and edit my friend!!🙂👍🏼
Thank you . Hope all is well
Great video, thanks for the info! I’m having some intermittent power loss issues, and now total loss of power. Battery indicator light shows charged but no juice. Replaced the throttle button still no luck. Any experience with that? I’m so bummed that I can’t ride! Would love to get your advice. Thanks in advance!
Sup man is there a brake sensor on the z1? If so how can I disconnect it?
Yes there is, one on each brake lever. To disconnect them, just fallow the smaller wires off the brake lever to the plug and unplug them. It's easy, takes about 1 min
Great video! Thanks for sharing!!
That's for the great comment
How do I get z1 accessories from you
Love your videos. Can you make a video of just routine maintenance for the Z one? Also, have you had any issues with cutting that white wire to get extra speed out of your Z one?
I could possibly make that, it's a short list. We have not experience any issues so far
Hmm i didnt know you could do that. I would just loosen the 1 allen that hold the brake cable to the brake and pull cable a lil the tighten. Is this way not right? Seems to work fine
That way works also, but it only mover the out side brake pad, so doing both is best. Thanks for watching.
I could not get the Allen key in the back wheel and I don’t understand how to do it with the calliper off
It's the same thing, take caliper off, turn allen bolt a half of a turn, reinstall and test to see if it helped, if not repeat the steps. Or remove the rear wheel and do the steps with caliper in place .
Thanks again for your Vid..go on.. bro
Great info thx man.
Glad it helped
We're in a community with big gnarly hills that we love and they're crushing our brakes when the kids ride. This was very helpful. *What's the make/model of that blue bike in the background of your vid? It looks awesome!
Awesome.. :)
The Blue bike is a Surron
my back brake makes a clicking sound when I pull on it well it feels clicky any way to fix that or do I just loosen it
Depends, how many miles do you have on them
For the back wheel using an allen wrench at that angle didn't work for me. Using a flat head that fits in the corner that locks it in works better for me.
What will be the price point on your light kit?
Looking like 150-175+ shipping.
thanks for the info
I’d like to see what you carry with you.🙂
Hero
na bro ain’t no way I did it and it worked thanks
You are welcome