De-Soldering Hacks | Easy De-soldering of SMD ICs | De-soldering with hot air Solder/Desoldering #5
Вставка
- Опубліковано 28 сер 2024
- This video is about easy handy de-soldering of tiny SMD (surface mount devices) ICs. The video shows why aluminium foil is useful in de-soldering and how it can be used.
#shorts
#shorts
• SMD Connector De-Solde...
• 12VDC to 220V Inverter...
• The Art of PCB Designi...
• Changing Resistance of...
• De-soldering Hacks | s...
• Temperature Sensing wi...
• The Simplest Strobe | ...
• The Simplest Strobe | ...
• QFP IC Soldering Ideas...
• QFP IC Soldering Ideas...
• Easy SMD Soldering | S...
• What is Optocoupler/Op...
• TO Packages | Transist...
• Solder Wick | What is ...
• De-soldering SMD compo...
• How To Remove Surface ...
• Schottky Diode Explain...
• What is a Diode | Diod...
• Breadboard explained |...
• Types of IC | IC Packa...
• How to make Bolt in So...
• Solidworks tutorial Ce...
• How Ultrasound Machine...
• Astable Multivibrator....
• Solidwork Connector de...
• SMD Resistor package c...
• Flip Flop Simulation i...
• Proteus Tutorial Simul...
• Solidworks tutorial De...
• solidwork tutorial lit...
/ aow81fr_1m
Let that tape cool down before you remove it or the caps and resistors will be on the back of it 😊
Screwdriver as Flux dispenser
Phillips PH4! 😂
I do it too cause I'm retarded 💀
There was no need for that metalized tape. Those other components shouldn’t move unless you have the air flow way too high
Safety is the first priority, it always good to be safe. You wouldn’t want to displace other components or want the pads to stick as a result of desoldering accidentally. This approach could be very helpful for beginners.
Whats the name of that alu probably tape?@@cliant1
@@user-vq8bg9bx6p
Brian
Twitch54304 is right. The surface tension will keep that small components unless the airflow is too high.
Actually, Kapton tape is the right choice to cover the surroundings, not aluminium.
very nice 👌
parabéns pelo capricho 👏🏼👏🏼🙌🏼
very good bro
I work similar to you, but I don't use a blower, I using only a classic soldering iron. I put aluminum tape all around the chip and then apply a lot of tin. When everything is melted, I use circular movements to control the melted mass and then the chip can be lifted from the board. I also mount a new chip, then peel off the aluminum tape and wash the board. I don't use flux at all, I have very high quality tin that already contains flux.
Then that's not similar.
For half an hour pasted the foil on the board and then anyway rubbed the ic on the board 🤣
Oh, come on. Why don't you show me which side of the soldering iron to use? And anyway it is not necessary in this situation, if the air flow is not strong, you will not blow out these capacitors.
The last try with this method i ripped of 4 traces, leave the device not repair-able. Questions: How much temparatur? Which flux do you use? What was this material you bind the other components?
KL-150 Solder Flux and smd291 flux I have been using since long, works best.
Не надо использовать этот "метод", так нельзя делать. Пользуйтесь феном и будет счастье.
nice tool
Even didn’t cover properly. Poor work😢
Why would you use both an electrical and thermal conductive tape when Kapton tape exists for this very purpose?
I watch somewhere, it's better use alum foil than kapton tape. in that video, kapton tape can't prevent melt connector near the working area. I've never had problem with kapton, but I'd better switch to alum foil
Wouldn't Kapton tape work too?
Ya probably cheaper than that aluminum tape
Pretty much what it's for. Kapton tape is also known as heat resistive tape, so yes it should work just fine for protecting components not needing to be removed.
In this situation this tape is not needed, you just blow and if you do not touch the other components, they will just float in the solder and then cool down and solder again. Aluminum tape is needed to protect fusible parts, plastic connectors, for example. And so you just need to learn how to properly use the air soldering station. A little practice and everything will work out) I recommend to buy vacuum tweezers, very convenient and unlike conventional tweezers it is more difficult to hurt nearby smd components.
Зачем фольга то? 🤣Купят паяльную станцую и не умеют пользоваться. Ещё и отвёрткой намазал паяльный флюс 🤣🤣🤣
@@ignatolenciuc4570 😂верю
Which microcontroller is this It has so may GPIOS?
I need one of these
Stm32 discovery board
Pretty strong arm crotex M4 running at 100 Mhz i think i love them
Low melt?
i just use a few coins
Мастер не достаточно квалифицирован можно обойтись и без ленты. Она не нужна
They make Kafton tape for that
Who sings the song?
Emotions of Technology RomansenyK Music
В начале одна микруха, отпаивает уже другую. Зачем такое?
This is no hack or easy method, that’s standard process which everyone knows.
That tape is rubbish, leaves a big sticky mess and use polymide tape instead. Kapton is a brand not a type of product
Just use a heat tape 😂😂 and why screw driver?
Thinking that the metal tape is not ESD safe…
Зачем этот цирк?😂
И зачем эта хрень была? 👎
Иногда бывают рядом в плотную к выпаиваемой микрухе компоненты которые греть очень не желательно, например электролиты. Ну или рядом smd компоненты настолько крохотные, что страшно ненароком сдуть))
Uuhhhhh.... what?
Смысл?