Nissan A/C not working
Вставка
- Опубліковано 17 жов 2016
- *Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use*
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3OecWhT
In this video I explain a problem on this A/C that go out easily
Disclaimer:
Due to factors beyond the control of Oz Mechanics, I cannot guarantee against improper use or unauthorized modifications of this information. Oz Mechanics assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Oz Mechanics recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Oz Mechanics, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Oz Mechanics. - Комедії
**Want to own the tools I use ?? Click on the amazon link below to get my top 5 Tools I use**
Automotive Test Light- amzn.to/3z1Pdxa
Flexible Backprobe- amzn.to/3Pyr3zO
Multimeter- amzn.to/3PbuT23
OBD Scan Tool- amzn.to/3zaNWnq
Wire Piercing Probe- amzn.to/3OecWhT
I replaced relays fuses was gonna add freon but compressor wasn't coming on. That sensor on my nissan wasn't even plugged in. I did plug in in after removing the glove box piece. It came on after I plugged it in. Had to add freon. I NOW HAVE ICE COLD AIR. You are the bomb Sir.. I owe you a steak dinner. I got this truck from my brother 3 years ago. Never had cold air in it until now. Thanks for sharing.
I TRY TO DO MY OWN MECHANICS WHEN POSSIBLE, YOU JUST SAVED ME AT LEAST 350 DOLLARS . I LOVE YOU !
Hi Oz,
Nice video you posted. I have a Nissan Tsuru 2006 here in Mexico (almost equivalent to 1993 U.S. Sentra). the problem I have is that air coming out the vents is too cold and compressor sometimes cycles on and off, and sometimes it doesn't.
When it doesn't, air flow gets reduced substantially and it is not as cold as before. I turn the compressor off manually and air smells like when one used to defrost old refrigerators. Once air flow gets back to normal I turn on compressor and everything's working fine.
According to service manual, my evaporator is freezing up and the "Thermo control amplifier" may not be working. I did today what you just described, cracked open the evaporator enclosure and saw inside what looks like the entire Thermo control amplifier stuck between the evaporator fins to be held in place. It looks like it is the entire module because the cable going to it has three conductors and the sensor is part of the body of the module. The manual I got says that the module is outside the evaporator enclosure and only the thermistor along with its two conductor cable goes inside, just like yours.
I didn't dare to stick my hand inside because I feared I could damage the enclosure. Could you stick your whole hand inside? the module is still like 6 to 10 inches away from the enclosure opening.
Anyway, I appreciate your posting this video. I presume this is the only one so far that describes the situation I faced today.
Thanks Oz, keep up the good work.
Rafael
I like ac videos... very informative. Thanks for taking the time
I actually ended up just bypassing this sensor. Being in West Texas, there's no chance of freeze up down here. Thanks for the tip and method of testing. A/C has been running great since watching this video to figure out my issue.
How do you do that?
Nice example of troubleshooting! Good "older" car that you can actually reach things "easier".
Omg thank you. My Nissan Frontier 's ac went out today
And I've checked everything but that sensor
Thanks for this. I was driving home from Bakersfield last week, 110 degrees in Bako, and the AC on my 2011 pathfinder just stopped blowing cold air. All fuses are OK. I don't think I'll attempt this one (I try to do my own work) but at least I'll know something to suggest so the shop doesn't do things like the dealership facilities do.
thank you very much brother for teaching us your intelligence thanks thanks
Dude! This video is hilarious and super super helpful! My wife has the same exact SUV with the same problem. I was driving myself nutts. Thank you Thank you Thank you!!!
So if my compressor clutch is clicking on and off could it still be my thermo control amplifier ? I have same 03 xterra "same color lol" blowing hot air.
thank you! this may save me $$$$$$$. now i have to replace a rear door latch
So what could be the problem if the clutch isn't clicking and the cooling fans do not run? FYI the ac switch works normally, the refrigerant is on specified level, tried to change the IPDM but the problem is still there... please advise.
2007 Nissan Frontier sat a long time in line at Dairy Queen, rather warm day. A/C started blowing warm air and heat gauge was up Abit. Turned off AC and temp went down. Turned engine off twice but it was still hot. Does the AC shut down if it sits at idle very long, on a hot day? Very weird. After I got out of there, turned AC on and it seemed to work fine, engine temp came down. What is this about?
My question is in my 04 xterra. 4cyl,, the ac will work for the first 15 mnts and then it will blow hot air, why is that,,???
I have a 2001 Nissan xterra. The AC will work on defrost, but when you switch it back to vent the clutch turns off. Could it be the control panel that is not working?
Thank you so much
my fuse pops on speed 3 .blows on 1 and 2 setting .2001 exterra????
Thanks bro
2009 Nissan pathfinder started having AC issues in 2014. Problems include: AC taking as long as 5-10 minutes to feel cool. Also the only way it becomes cool is if I'm driving 40mph +. Please help
I’m no expert, but I’ve had that issue with a bmw and it turned out to be the electric fan wasn’t kicking in when I turned on the a/c so it literally needed to be driven a certain speed so the little a/c radiator in the front of the car can dissipate the heat properly. I’d check out the cooling fan or fans on the front of the radiator. Good luck!
what is the part name?
Very true
Can anyone tell me what those 2 black dots next to the cigarette lighter are?
Chad Nelson if I'm not mistaken I think they're holes for any upgrades that the vehicle offered
My 2009 Nissan pathfinder started having AC issues in 2014. Problems include: AC taking as long as 5-10 minutes to feel cool. Also the only way it becomes cool is if I'm driving 40mph +.
Jesus Sanchez look at the convencer fan
THAT IS CALLED A 4 40 AIR CONDITIONER, FOUR WINDOWS OPEN AT 40 MPH
So I replace that part and same problem hot air. I replace compressor, pressure switch, relay fan motor turn on. Any other ideas thanks.
I would recommend you getting it diagnosed by a good technician. I wouldn’t want you to keep throwing in parts, without properly being checked out
Do u have any code?
And it show in live datA any thing
codes are for engine or drivetrain not a/c stuff.maybe on the newer cars but not this old .
What is this mechanic located at
Where can I download the diagrams? I couldn't find them in iatn
Bbb industries
@@OzMechanics That service has been removed , that sucks.
i AM WORKING ON A Frontier, I have what is called a Thermo control amp. It has three wires going to it, my allldata indicates that when it's operating, the one hot wire should make the other tow hot. It's located in the same place, at least the three wires enter the evap housing through a similar hole. Alldata diagrams for this car suck. one diagram shows the M60 connector having three terminals, another shows 2. I have jumped the three wires and nothing happens. I have jumped the pressure switch, nothing, alldata says when it's running, the pressure switch is 0 volts back to the ECM....I don't believe that is correct.
It's not National Auto tech network, It's International Automotive Technicians Network. It is a good site, but you need to be a member to search the data base. If you're a professional it's worth the money.
Thanks for the video, I was just looking for a silver bullet that more or less goes step by step. I know the compressor is good, jumped the relay, I know the relay is good, swapped it with the horn and it blows. I have tried the pressure switch jumped and disconnected, my Snap-On scanner says it's "off", it says no signal on another pid.
The air blows cold now and then, mostly not. I have a gut feeling it's the amp in the box. I might just load the parts cannon and fire it. I'm tired of dicking with this truck. I have an auto electric and driveability shop, I'm 69 and work along, my patience ain't what it used to be.
The title shows 2008?
Good video but a lot of wind makes the video not enjoyable.
This is a complicated circuit to you? I'm not being an ass but that's probably one of the better/easier diagrams I've seen for a thermal control, great video though I think the harder part is actually locating the darn components in a car I didn't know where that intake sensor was, I would normally think the air Intake too so thanks for the leg work
This was the issue with my ac too. $20 later and I have a ac that blows ice cold air
Awesome 😎
@@OzMechanics thank you for your service
If you feel like this video helped out, feel free to support the channel by donating. Just one click away on the link below, to help support the channel :)
www.paypal.me/ozmechanics
Why's this say 08 if it's not?
xx505ninjaxx holy smokes
***Want to use the tools im using in this video ?? Click on the amazon link below ***
205 Automotive Tool Set- amzn.to/3azN2Y6
T- Pins- amzn.to/3uKufA4
Power Probe 3- amzn.to/3P9nDDy
Do you know what a tripod is jeez shaking all over
Can you please explain where I can find one. Thanks in advance
Lol my 04 Xterra is doing the same
Noiiiiiiice hope it fixes it
I'm getting dizzy watching this, quit throwing me around, it hurts.
Kevin sorry for that I was inspired by the roller coaster in universal studios. I’ve made a change. Please feel free to watch my newest video to see how I did
Nissan is junk?