BFSIII™ for HK

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 32

  • @bluegrassarmsreview2449
    @bluegrassarmsreview2449 5 років тому +4

    That burst at the end was extremely impressive.

  • @mattinghas4124
    @mattinghas4124 6 років тому +11

    Now comes the question. Does it actually work in a real hk91 patterned rifle, cus thats an hk93

  • @jessebarney5964
    @jessebarney5964 4 роки тому +1

    Just added one to my sp5. Easy to install and so much fun to shoot.

  • @MrRmh3481
    @MrRmh3481 7 років тому +14

    Interesting concept. Never carried an Hk91 with a banana mag, you sure that isnt a 93?

    • @ZERO_42069
      @ZERO_42069 5 років тому +1

      MrRmh3481 yeah it’s a 223

    • @richstone2627
      @richstone2627 5 років тому +7

      You're going to correct him and then type banana mag LOL There is no banana mag.

  • @adamkpowell
    @adamkpowell 7 років тому

    Just got my preorder in the mail, thanks guys looking forward to a review and range test. This got me to actually buy into the platform. And please do the ak trigger, I’m also still waiting!

  • @gungrabber970
    @gungrabber970 7 років тому +17

    This is the obligatory "still waiting for AK trigger" comment!

    • @logansmith4215
      @logansmith4215 6 років тому

      SAME

    • @DisappointedScrosh
      @DisappointedScrosh 6 років тому

      You can use the soda can trick to hold you over until they release it. It’s a non permanent mod that takes like 2 minutes.

    • @strider5964
      @strider5964 6 років тому

      Fostech is planning to release and AK echo trigger.

  • @gunsandstuffinfo779
    @gunsandstuffinfo779 3 роки тому +1

    Will this work on a ptr105 pdw placed my order for one just wanted to see if it’ll work

  • @jorgecortez8568
    @jorgecortez8568 7 років тому +2

    HELL YEAH! 👍😀

  • @thereturningshadow
    @thereturningshadow 6 років тому

    Would your trigger work in a 32 KFR PTR 200, their 7.62x39 rifle? Or would you need to create a new trigger group for that?

  • @dietryingracingteam
    @dietryingracingteam Рік тому +1

    will this work on the hk/umarex 22lr mp5?

    • @RangeToyz
      @RangeToyz 10 місяців тому

      Unfortunately no. Different trigger packs. Only works on 9mm, 7.62x51, 7.62x39, 5.56 and the rare 300 blackout. I have them on all those except 300 blackout. That’s a special and expensive build.

  • @crowsbridge
    @crowsbridge 4 роки тому

    Does the hammer spring work with a 91?

  • @kraemer66
    @kraemer66 7 років тому

    Got mine today #56 it said, installed and tested. Had planned to get a video up today, but the Chinese ebay bargin mount for my i was using to Gopro to the MP5 (Zenith Z-5RS) failed about a minute in. But I can say install took only a few minutes minutes, most of which were spent lightly sanding down the bur that was preventing my extractor lever from moving freely.
    100% reliable, and much better than my Echo trigger in build quality, feel of the trigger pull, and consistency of the binary function. Anyone who has shot an Echo trigger knows there is a midway point where you can pull the trigger, but not pull it far enough that the trigger falls when you release. It's irritating and makes for slower, choppier fire rate as you have to very deliberately pull and release. This new BFSIII has none of that, it fired every time, pull and release.
    The Binary trigger makes for some fantastic double taps. At 15 yards every release shot was within 2 inches of the first.

  • @capojeromia
    @capojeromia 7 років тому +2

    Better call your congressmen or they will pass hr 3999

  • @Rhethion
    @Rhethion 7 років тому +3

    Can't wait to get mine!
    They should be shipping soon, right?

  • @andremcwhorter6728
    @andremcwhorter6728 4 роки тому

    Will it work for the ump?

  • @adamwebber7656
    @adamwebber7656 7 років тому +1

    Excited to see how these perform. We plan on offering them as soon as they are released.

    • @biowulfe
      @biowulfe 7 років тому +1

      Aren't you in jail? Not that I think you should be (I think the whole thing is pretty BS). But, if this is someone from HKParts posting, you probably should change the account name from Adam Webber to someone not convicted of firearms related offenses. Or conversely, if it is Adam, you may want to remove the HKParts icon from your account.
      Finally, if it is some rando person posing as Adam Webber from HKParts... I guess that's not very nice? ¯\_(ツ)_/¯

    • @hellcatdave1
      @hellcatdave1 4 роки тому

      @@biowulfe Adam very much deserved to go to jail lol.

  • @Chedr89
    @Chedr89 5 років тому

    Would this work in a marcolmar cetme l in 556?

  • @MarketMoDz
    @MarketMoDz 6 років тому

    This would work in a Zenith Z-5RS?

  • @gelobahinting3366
    @gelobahinting3366 7 років тому

    What about the Steyr Aug?

  • @artiranmor
    @artiranmor 7 років тому

    Hi! What about the HK41 ?

    • @redtra236
      @redtra236 7 років тому +1

      Yes this will work in the HK41... it's literally the exact same as the 91 except it's stamped .308 instead of 7.62x51.

  • @adamkpowell
    @adamkpowell 7 років тому

    Thank you guys! I just put up an unboxing of my franklin HK pre-order trigger here ua-cam.com/video/HbcLYBfFr3s/v-deo.html