Good evening I'm from Brazil and this is the best mini pcb drill video I've ever seen. Is it possible to send the measurements? You're from Congratulations.
Xвсе просто замечательно, одно Но... можно было ещё повыше сделать, чтоб патрон не доходил до основания где-то 3 см. И рычаг бы тогда твой (большой) смотрелся бы идеально. Лайк мастеру!
Dude why didn't you make the backing and mount for the motor wider? Then put your angled corner piece on top rather than on the side of the motor mount. The way you've done it has your adhesive under a shear load rather than compressive. I get that this is a low stress piece but still... And please drill into some waste board next time instead of onto your vice. Unless you just like destroying bits for the fun of it. 😉
Is video ka वास्तविक जीवन से कोई लेना देना नहीं है ये वीडियो सिर्फ टाइम पास के लिए बनाई गई है अगर आपका टाइम पास नहीं हो रहा है तो ये वीडियो देखो टाइम पास हो जाएगा।
Neat job! Having said that. I haven't found any video of diy making a wood based tool WITHOUT USING those expensive power tools, table saw, bandsaw, etc, making a diy tool questionable...why don't you just buy one then....
Wow, I watched and was almost impre@ed, but then I asked myself, how do you still have fingers, how are you still alive, and how in the hell do you have so many subscribers?
Man. Your work is awesome, but please, I beg you, be careful with your tools. At 0:27 , the saw was quite close to your finger, and at 0:35 , the blade was too high (and your hand is fcking close). Please, keep creating content, but with all the safety needed. You can use 2 wood pieces to move the wooden board on your table saw. Never forget that your tools can cut your finger or hand with ease, and even more ... Anyway, that was a very nice video. Thanks for sharing that. Greetings from France
Love to watch skilled people at work well done mate 👍👍
perfect as usual.. finally a drill press without a power drill a real motor...
This guy is OUTSTANDING!!
Awesome !!!!!!!!!! I would love one of those Mini Bench Drills !!!!!!!!!!!
This is so totally awesome!!! I need one of these to make the circuit boards for my homemade milling machine.
Very very good work 🎉🎉🎉
super very nice wow great job sir. ..!!👍👍👍👏👏👏
Your videos really reduce my stress brother .
That is the best mini drill press I've seen.
Kreatifitas tampa batas👏👏👍👍
Ciao caro, che spettacolo di attrezzo che hai costruito, veramente originale. Buona notte e un forte abbraccio!
Really nice ,work
😃😃😃
Love this, but damn you already have all the tools in the world to make it, lol!
Woooow, what a bearing!!! I have the same type, but shorter :D
Beautiful work, dude! Really well done! 😃
Stay safe there with your family! 🖖😊
Damn it's alot more robust than I thought it'd be!
Could you do a simple metalwork lathe?
4 days now :)
Id suggest a cheap Chinese mini lathe, there crappy but they get the job done
Cool Project !!! 😎👍🏻👍🏻👍🏻
Good work!
Awesome my friend
Great idea , thanks so much sir :-)
You should always at least use set screws when attaching to a motor shaft. Never only glue. Glue will not hold up for the chuck either.
Ładne maleństwo 👍I poręczne.Dobra robota.
very cool build!!!
Really nice job...as usual 👍
Just got to appreciate a man handling his wood with care.
Where did you find that linear bearing? great video. I think I have everything else.
Very nice and useful.
Very good job, thanks
Great job handy tool
Very nice ❤
This istituzionale best project for dillo press on UA-cam
Depthmeter and a limiter would be perfect
Mantap🧐👍 bro
Good evening
I'm from Brazil and this is the best mini pcb drill video I've ever seen. Is it possible to send the measurements?
You're from Congratulations.
kolejny super pomysł !
Your glue is too good😂😂
Congratulations. Good job
Very good! Could you provide some dimensions, for example, of the woods, linear bearing and other parts? Thanks.
Please show how you made your stamp press!
1:47 what spray did you use?
it is very important to have a good and reliable electric motor
Where did you get the mini chuck?
Xвсе просто замечательно, одно Но... можно было ещё повыше сделать, чтоб патрон не доходил до основания где-то 3 см. И рычаг бы тогда твой (большой) смотрелся бы идеально. Лайк мастеру!
Dude why didn't you make the backing and mount for the motor wider? Then put your angled corner piece on top rather than on the side of the motor mount.
The way you've done it has your adhesive under a shear load rather than compressive. I get that this is a low stress piece but still...
And please drill into some waste board next time instead of onto your vice.
Unless you just like destroying bits for the fun of it. 😉
Also please put some e-tape, or kapton, or a Tupperware lid, some sort of protectionon those leads
What is the length of the linear guide?
Is video ka वास्तविक जीवन से कोई लेना देना नहीं है ये वीडियो सिर्फ टाइम पास के लिए बनाई गई है अगर आपका टाइम पास नहीं हो रहा है तो ये वीडियो देखो टाइम पास हो जाएगा।
Brilliant
Netflix: You still there?
Someones daughter: 1:32
Very nice.
Need a drill to make a drill
Like 3D printers, works the same way
@@MatiasZarate1989 you are pee
@@beepbeeplettuce848 you ?
Kuba Vrabec nah
Go watch primative Technology channel then
Ai sim meu parceiro
where i found those equipments??
Can it drill aluminium thick 1cm?
a pcb drill maschine nice
Wow Nice.
Neat job! Having said that. I haven't found any video of diy making a wood based tool WITHOUT USING those expensive power tools, table saw, bandsaw, etc, making a diy tool questionable...why don't you just buy one then....
I’m not understand too haha
Man this man smart
Want to do course with em
Please lower your tablesaw blade to just above the top of the wood you are cutting. Very dangerous operation.
👍👍👌👌👏👏
Top !!!!!
This is cool
Fully equipped but genial work
railing is more expensive than a harbour freight drill press.
very important drill to made drill
do you have an opinion on power tool brands? im a makita man myself.
how you dont have more than a million subs yet is a crime!
Wow, I watched and was almost impre@ed, but then I asked myself, how do you still have fingers, how are you still alive, and how in the hell do you have so many subscribers?
No way this guy is bored during lockdown.
Skomentowawszy
Nice #todoinventostv
Hola bro donde consigo un motor como ese
Y canto voltaje le das
Subscribed my friend
Nice ..
💥👍👍🔥🔥
Nice.man
Man. Your work is awesome, but please, I beg you, be careful with your tools.
At 0:27 , the saw was quite close to your finger, and at 0:35 , the blade was too high (and your hand is fcking close). Please, keep creating content, but with all the safety needed. You can use 2 wood pieces to move the wooden board on your table saw.
Never forget that your tools can cut your finger or hand with ease, and even more ...
Anyway, that was a very nice video. Thanks for sharing that. Greetings from France
Can I by it?
You're telling me I didnt need to buy a drill press? but I could have just bought a lathe, sander, and 5 gallon bucket of glues?
Patchwork Gardens can’t you use somebody else’s lathe?
Он что вал на ПВА приклеил? :)
Слегка прихватил )
I like it yr working plz replay me...
💯👍👏👏👏👏👏👏
nice
Bro actually you don't need a mini drill press , you already have so many machine . You just have to buy a mini drill press .
Всем Привет!!! Гдекупить такую напраляющую штангу??????
V good
sweet
The Incredible thing is that I need a drill and a vise for me to make a mini bench drill ... That doesn't make any sense!
Next video: Making my own spaceship out of plywood
BRAVOOOO
Aprovado.
Make it a bit higher
Dg izin Nya bisa alat alat itu dimiliki
Nieda się zrobić wszystkiego z drewna
MN potrzymaj mi piwo
NO !!!!
Bhai chaiae
Minus za to że nie odpisujesz.
Useless - no verbal instructions. Thumbs Down.