Added the cabin filter to my 2007 Silverado 1500 today. I cut most of the plastic slot area with my Harbor Freight oscillating tool with a sharp sleel cutting blade. Then, clean up the area with the utility knife and pop out the plastic as shown in the video. Thanks for doing the video and, giving us the basics on the job 😎
This should be a recall.. cant imagine how Many people got sick..... When i pulled it out i noticed how much debris was on there and how wet it was.... Glad you guys sell this part... bought it amd was easy to install
Soooo, GM, in their infinite fkng wisdom...... actually engineered the air system to accept a cabin filter. Then completely sealed off the filter slot so it couldn't have a filter? This is so the way GM does things.
Yes i was confused as well that there is no existing cabin filter. If your going to do this, I recommend getting a propane torch and heating the tip of the utility knife, this will make the cut much easier!
I was excited for this project. I ordered the retrofit kit, retrieved my Dremel Multitool to cut into the plastic housing, removed the black kick-panel and almost immediately realized my 2013 Silverado LT 1500 4x4 was built with a different blower housing. Unfortunately there was no plastic blank to cut out. I’m bummed that I was not able to make this improvement. Will be sending back the retrofit. Total bummer. Just wanted to put it out there that GM used more than one blower housing on these trucks 😢
My think is, why would any vehicle manufacturer not put a cabin air filter in a vehicle?! You wouldn’t have a house ac system without a filter, this should be the same thing
2007-2013 Silverados were made without cabin air filters because they were made them with a plastic mesh or similar covering that was meant to not be replaced or removed.
This video was very helpful. I had to do the same thing you did on my 2012 GMC Sierra Denali 1500 . Your right about taking your time cutting out the hole for the filter. Everything went well, no problems . Thank You so much 😊😊😊😊😊😊
Thank you for this video. This has to be by far the dumbest design I have seen for a cabin filter. Fiats are easier to change! Insanity. If there was no filter to begin with why install one?
Once it comes time to replacing these filters, are these filters readily available at any local auto parts store? Or do they always have to be specially ordered online.
I have an 2008 gmc dually but my hvac box is different from all the videos I've seen for the retrofit,my hvac box where the filter is supposed to go is a molded one piece section
the floor / carpet is wet /passenger side...can the water get in through this location? I've never done the cabin air filter replacement task ! I was shocked to see there is not a Factory installed filter ?!!? How i'll proceed to find the water source ? Hmmm? any suggestions's? "2008" Silverado ....
Hello, my Silverado C 2500 2007 has the area where the filter would go solid shot, and it did not have the lid. so the space to receive the filter is there, unless I would have to cut the area so I could place the filter. Thanks.
So I followed all the directions and was lost, so I took my 2011 Silverado aka “truckasauars” to the GM dealer and low and behold, some models did not come with an air cabin filter.
Thanks for the video. We have been scammed because there is no filter in there to begin with. I am the only owner of my 2007 silverado and I thought it wasn't equipped to have one.
Did this help with the air flow throught the vents cause my air flow sucks I changed the blower motor and resistor and now I'm to this before I go towards the climate control module and I don't think I need the module it seems like something is clogging my air flow and some people did this and they said it helped alot so I'm just asking around if it made it better
Great video. It certainly helped me with the retrofit/installation in my 2012 Sierra. Thank you for creating & posting. One question... The filter(s) I've seen do not have a direction indicated on them. And I've seen them placed either way in the videos I've watched. Is it safe to assume the filter doesn't have a specific direction? If so, I'd just like to mention that I found it easier to fold/roll the filter with the cuts facing the passenger side. (Opposite of what's shown in your video.) Thanks again for posting. 🙂👍
Different countries have different specifications and option requirements. It's cheaper for the manufacturer to mold the box as a sealed unit and form the access panel if the option list calls for it. I once had a brand new small dodge car that had the access panel but did not come with a cabin filter pre-installed. I had to buy the filter and install it myself.
I did this with a heat gun & a $2.00 utility knife from Walmart. Ain’t no way I’d be able to cut that out without heating the plastic first. Evaporator was dirty. I’ll have to clean that next time I change the filter.
Wait there is no filter these trucks come with??? WTF. It's truck I'll be in the dirt on sites, farms, chem plants, and they didn't bother to have a filter in the mothertucker ?? Wow. Great job chevy
+Retired Person The is correct. Some model vehicles did not come with a cabin air filter from the factory, but are able to be added as shown in the video.
I bought the Dorman kit. I must say it’s a brittle filter that breaks up when you bend it to install. I don’t know if a GM filter for earlier trucks that had a cabin air filter were flexible, but that’s what’s needed for this location.
GM gets an F for not installing a filter in the first place. Why create a housing without a filter. You get an A for making the video but I have to give you an F for fictional content in a documentary. It was way harder than you made it look.
+mrfrostbite2020 The 2009 Chevy Silverado 3500HD models without a cabin air filter will typically use a plastic mesh that prevents leaves or other foreign objects from entering the HVAC system.
you really need to update the title as it misleads one to think it is for all Silverados, not just the 1500s. I have a 2012 2500 and this video does not seem to apply.
Chevy avalanche nice truck but there is always a but why but why would you design a airbox knowing that you have to put a filter 🤔 😳 completely sealed 🤔 what was wrong with the old design had a door to it 🤔 what were they thinking I see why yall are in the mess yall are in 👌 👏 thx a hole helleva lot my god
Typical American vehicle shit makes no sense. There is no filter in the place where you put the filter, then you have to cut the plastic out, to put a filter in... then use a wood screw to secure it... what a joke. I changed a suzuki air filter today.... it was so easy 5 minute job
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
I’m glad I watched this video before replacing my cabin filter because I learned there’s actually nothing to fucking replace
At first I thought It was going to be easy. Not so much. Why don't they make things easier for the consumers. Appreciate the video
I would like to note, since I just figured it out, that some 2006 models have the exact same setup. Thanks for posting this.
Added the cabin filter to my 2007 Silverado 1500 today. I cut most of the plastic slot area with my Harbor Freight oscillating tool with a sharp sleel cutting blade. Then, clean up the area with the utility knife and pop out the plastic as shown in the video. Thanks for doing the video and, giving us the basics on the job 😎
This should be a recall.. cant imagine how Many people got sick..... When i pulled it out i noticed how much debris was on there and how wet it was.... Glad you guys sell this part... bought it amd was easy to install
Soooo, GM, in their infinite fkng wisdom...... actually engineered the air system to accept a cabin filter. Then completely sealed off the filter slot so it couldn't have a filter? This is so the way GM does things.
Yes i was confused as well that there is no existing cabin filter. If your going to do this, I recommend getting a propane torch and heating the tip of the utility knife, this will make the cut much easier!
You were the only one that talked about cutting away door opening for first time filter install that was icredibly helpful!!
I was excited for this project. I ordered the retrofit kit, retrieved my Dremel Multitool to cut into the plastic housing, removed the black kick-panel and almost immediately realized my 2013 Silverado LT 1500 4x4 was built with a different blower housing. Unfortunately there was no plastic blank to cut out. I’m bummed that I was not able to make this improvement. Will be sending back the retrofit. Total bummer. Just wanted to put it out there that GM used more than one blower housing on these trucks 😢
I don't understand. If ur truck has a plastic piece there and it doesn't need a cabin air filter. Y put one? Help me understand.
There isn’t even an air cabin filter to begin with? Then why say replacement? Why not just say add a air cabin filter to your vehicle?
Do you have a part number for the door you installed?
This video came just in time.
My think is, why would any vehicle manufacturer not put a cabin air filter in a vehicle?! You wouldn’t have a house ac system without a filter, this should be the same thing
2007-2013 Silverados were made without cabin air filters because they were made them with a plastic mesh or similar covering that was meant to not be replaced or removed.
And we survived in 60's through 00's vehicles without this. Ridiculous!
This video was very helpful. I had to do the same thing you did on my 2012 GMC Sierra Denali 1500 . Your right about taking your time cutting out the hole for the filter. Everything went well, no problems . Thank You so much 😊😊😊😊😊😊
Was that a drywall screw?!?
Thank you for this video. This has to be by far the dumbest design I have seen for a cabin filter. Fiats are easier to change! Insanity. If there was no filter to begin with why install one?
Brilliant video
Where can I find the lit the you put for cover??
Once it comes time to replacing these filters, are these filters readily available at any local auto parts store? Or do they always have to be specially ordered online.
I have an 2008 gmc dually but my hvac box is different from all the videos I've seen for the retrofit,my hvac box where the filter is supposed to go is a molded one piece section
the floor / carpet is wet /passenger side...can the water get in through this location? I've never done the cabin air filter replacement task ! I was shocked to see there is not a Factory installed filter ?!!? How i'll proceed to find the water source ? Hmmm? any suggestions's? "2008" Silverado ....
Is there an rpo code to know whether you have it already or not my truck is an 08 silverado
I already changed the engine air filter so is there really a cabin air filter behind the glove compartment in a 2012 GMC Sierra SLE???
So what about the plastic mesh inside of the box? Doesn't it defeat the purpose of adding an additional filter if the mesh is dirty?
When you buy a filter does it come with the door?
Perfect job for a multi tool, which is what I used
If one was never in there why add one. And then how do you clean the coil ?
Where do i find a lid for the filter after i cut or the blank?
Okay this is a retrofit this is not a replacement, now I know why my dealership said that there was no cabin air filter on my truck......
Which lid did you use after where is that part??
Thanks!!!!
Hello, my Silverado C 2500 2007 has the area where the filter would go solid shot, and it did not have the lid. so the space to receive the filter is there, unless I would have to cut the area so I could place the filter. Thanks.
So, they come with no cabin filter?
You are right Y even replace if there is none to replace
So I followed all the directions and was lost, so I took my 2011 Silverado aka “truckasauars” to the GM dealer and low and behold, some models did not come with an air cabin filter.
+C mc Thanks for the tip! 1aau.to/m/Shop-TRQ
What is the wiring module right beside to the right , with the green , white and red wires ,, bolted right next to the filter slot. ??
Thanks for the video. We have been scammed because there is no filter in there to begin with. I am the only owner of my 2007 silverado and I thought it wasn't equipped to have one.
Gracias, checare mi silverado 2009 para ponerle filtro de cabina
Did this help with the air flow throught the vents cause my air flow sucks I changed the blower motor and resistor and now I'm to this before I go towards the climate control module and I don't think I need the module it seems like something is clogging my air flow and some people did this and they said it helped alot so I'm just asking around if it made it better
Great video. It certainly helped me with the retrofit/installation in my 2012 Sierra. Thank you for creating & posting.
One question... The filter(s) I've seen do not have a direction indicated on them. And I've seen them placed either way in the videos I've watched. Is it safe to assume the filter doesn't have a specific direction?
If so, I'd just like to mention that I found it easier to fold/roll the filter with the cuts facing the passenger side. (Opposite of what's shown in your video.)
Thanks again for posting. 🙂👍
De donde sacaste la tapadera ya que instalaste el filtro
Different countries have different specifications and option requirements. It's cheaper for the manufacturer to mold the box as a sealed unit and form the access panel if the option list calls for it. I once had a brand new small dodge car that had the access panel but did not come with a cabin filter pre-installed. I had to buy the filter and install it myself.
+Grimm Reaper Thanks for the feedback! 1aau.to/m/Shop-TRQ
Every vehicle with an HVAC system (ie every vehicle) should have a cabin air filter. Is this just GM cutting corners?
I did this with a heat gun & a $2.00 utility knife from Walmart. Ain’t no way I’d be able to cut that out without heating the plastic first. Evaporator was dirty. I’ll have to clean that next time I change the filter.
Mine is my glovebox. 2007 Chevy Silverado 1500 Classic.
Mine does not even have the thing to cut or a place to put a new screw what do I do now?
What’s the part number for the invisible filter????
Mine feels clogged. Adding a filter isn't going to help me. I need to clean the evaporator now?
So there is no filter. Interesting
ok here is the question need filter or not?
Wait there is no filter these trucks come with??? WTF. It's truck I'll be in the dirt on sites, farms, chem plants, and they didn't bother to have a filter in the mothertucker ?? Wow. Great job chevy
Is this really necessary? Not a joke, i just really dont know about mechanics.
Every cabin air filter should be easy like Hondas why Chevy do us like this 😂😭
Screw that! If it doesn't have a factory installed one why bother?
So ... Is what I am seeing here correct? That there IS NO FILTER from the manufacturer?
+Retired Person The is correct. Some model vehicles did not come with a cabin air filter from the factory, but are able to be added as shown in the video.
Porque mi Chevy 2010 no lo tiene ahí ? No lo veo esta diferente
So this is why I smell every Joe shmos hooptie with an exhaust leak in the cab?? They don’t come with one ?!
This means that all the dust was collected into the condenser panel😢😢
I bought the Dorman kit. I must say it’s a brittle filter that breaks up when you bend it to install. I don’t know if a GM filter for earlier trucks that had a cabin air filter were flexible, but that’s what’s needed for this location.
GM gets an F for not installing a filter in the first place. Why create a housing without a filter. You get an A for making the video but I have to give you an F for fictional content in a documentary. It was way harder than you made it look.
So it looks like you added a filter not replaced one lol
My 2009 Chevy Silverado 3500 HD does not have this. Why is mine different? It's a 2009 Chevy Silverado.
+mrfrostbite2020 The 2009 Chevy Silverado 3500HD models without a cabin air filter will typically use a plastic mesh that prevents leaves or other foreign objects from entering the HVAC system.
I’m confused. How is this a replacement?
you really need to update the title as it misleads one to think it is for all Silverados, not just the 1500s. I have a 2012 2500 and this video does not seem to apply.
La mía ya no trae la tapa
Donde esta el filtro biejo
Cómo vas a poner el filtro nuevo ese vídeo no sirve
So it looked like that there was no filter to begin with.
Y el filtro no se ve el que sacaste
If it don't come with one..why add one...evidently it's not needed
Something is wrong I think that you didn't show a step
Chevy avalanche nice truck but there is always a but why but why would you design a airbox knowing that you have to put a filter 🤔 😳 completely sealed 🤔 what was wrong with the old design had a door to it 🤔 what were they thinking I see why yall are in the mess yall are in 👌 👏 thx a hole helleva lot my god
Not even bother with that missing screw? Fired!😅
The filter under the hood is all that needs changing..
wow they're isn't one to replace.
This is the most Chevy shit ever. So Janky...
si no lo tiene original es mejor no ponerle nada
That is the DUMBEST SETUP EVER
Why the rubber gloves?
Why there isn’t filter from the factory I’ve been filtrating the air with my lungs all this time
Typical American vehicle shit makes no sense. There is no filter in the place where you put the filter, then you have to cut the plastic out, to put a filter in... then use a wood screw to secure it... what a joke. I changed a suzuki air filter today.... it was so easy 5 minute job
$50000 truck with such a stupid set up. Honestly just make two cips Chev. How cheap cam you get!
Most ridiculous thing ive ever seen
Very poor engineering. Shame on GM.
Learn how to label your videos this isn't even for those years.