#SuperFastCharging #PowerBank #ErCanEverything 🔥Full Video👉 • How to make a 40 000 m... ⚡PD Fast Charge 5A 100W Type-C USB Charging Module 👉 s.click.aliexp...
Bro you could have done the screw system because in further anything happened u could have opened and it would be easy to repair. This was my suggestion that's all
battery pack is connected in the form of 5S 2P so the maximum capacity is 7.2Ah (if the capacity of each battery is 3.6Ah - the highest capacity for 18650 battery) cannot be up to 40Ah as the title. If it's 40Wh it's entirely possible.
@@NgBangkt I see the battery pack is 5S 2P model, so I see 21v on one end, if it is a 4Ah cell 21700 like you said, the battery pack is only 8Ah Batteries in parallel increase capacity, voltage remains constant Battery in series, the voltage accumulates but the capacity remains the same
before anyone makes this battery, if you intend to bring it on a flight, this battery would not be allowed as the maximum capacity allowed on board is 100Wh. For standard 3.7V li-ion packs, that's 27027mAh.
I'm sure that's what he meant. Higher current carrying capability wire. But let's face it, if it's made in China, they will never get it through their heads to use proper size wiring. That goes for ALL of the electronic junk built in China.
For example, if you connect 10 batteries in parallel, one of which is 3.7V and 4000mAh, then the capacity and voltage becomes 3.7V and 40,000mAh. But if you connect them in series then it becomes 37V 4000mAh.
There ain't no way that is 40,000mAH. You'd need 12 batteries if you could find 3500mAH batteries. But as most are around 2600, you'd need 15-16 of them.
Yeah... Read again, he said it's possible if we Can find 3500 mah cells. I literraly gave you 2 exemples of the 2 biggest battery makers 3500mah cells...
Low heat dissipation. Low maintainability. it needs latches or screws. Low safety of touching the contacts of the circuit on high-current elements. in this case, it is possible to shift the elements in the adhesive layer. And make rounding on the body! brick is not too aesthetic. For the rest - the combination of individual elements of the scheme is good.
Those thin wires are used for balancing voltage between cells while charging powerbank. When powerbank is being discharged, current passes through nickel strips, thick black and red wires.
Да xýли говорить?Сколько таких видео с неконструктивными конструкциями?Одни-электроэлементы к кроне 9вольтовой припаивают,тут-детали на клей.Какой-то бред происходит.
I really value PCBs that support fast charging, so my video titles always have the correct information. The battery is 8Ah but is equivalent to a 3.7V 40,000mAh Power bank Full video ua-cam.com/video/y_3yFDpwFBk/v-deo.html
I like to make this bower bank but unfortunately it is not available in my contry this module but allready i ll made power bank and i make some projet by arduino and raspberry pi, have a nice day 4 all, 🎉❤ good jop, thank u
Would you sell one of these? I need one that fits the bottom of a specific backpack with as many batterys as can fit. Would pay according to what it is and obviously for your time and skill/equipment. Was going to space 3 stacks in PVC pipe but this is nice.
Dari mana anda dapatkan modul itu dan kenapa ada port tab c di modul nya sedangkan baterai yg di rakit 3s 8cell. klo baterai secara di seri 3.7 volt menjadi 12volt
Для быстрой зарядки провода тонковаты, и я говорю не про балансировочные, а про силовые. Да и корпус можно было распечатать с элементами крепежа на болтики. Склйка непрактична
Hocam taşınabilir hoparlörüm için yaklaşık 20bin veya 30bin kapasiteyle sahip.bir batarya sistemi yapmak istiyorum, şarj bağlantısı ve güç aktarımı nasıl yapmalıyım acaba yardımcı olur musun?
Merhaba. Bu modül her iki Type C soketinden pilleri şarz edebilir, aynı zamanda çıkış olarak ta kullanılabilirler. Bu da uzun video ve modulün linki açıklamalar kısmında mevcut. ua-cam.com/video/y_3yFDpwFBk/v-deo.html
The way the other phone shows battery charging screen again when you connect a phone to it is concerning. There could be a voltage drop for a moment there.
Your power bank project cannot be accepted as it does not comply with the international security system due to the capacity classification being applied wrongly.
@@Shadow_banned_by_UA-cam Не, вот только не надо фантазий. Посмотри еще раз ролик, там четко видно что автор подключает акум четырьмя проводами к плате с вмонтированном BMS. А это значит...... правильно, акум построен по схеме 3S и 2Р. Или же 12 вольт.
🔥Full Video👉 ua-cam.com/video/y_3yFDpwFBk/v-deo.html
Like
Link
Nice
কিভাবে নিতে পারবো
Y
Bro you could have done the screw system because in further anything happened u could have opened and it would be easy to repair. This was my suggestion that's all
u can easily remove this glue
@@aibi5532 No you can't but he can easily print another box.
@@frankjohnson8006 it's easy to remove using thinner
battery pack is connected in the form of 5S 2P so the maximum capacity is 7.2Ah (if the capacity of each battery is 3.6Ah - the highest capacity for 18650 battery) cannot be up to 40Ah as the title.
If it's 40Wh it's entirely possible.
21700 cell is 4000mah so at 3.7v it is 40ah
@@NgBangkt I see the battery pack is 5S 2P model, so I see 21v on one end, if it is a 4Ah cell 21700 like you said, the battery pack is only 8Ah
Batteries in parallel increase capacity, voltage remains constant
Battery in series, the voltage accumulates but the capacity remains the same
@@blakey271able yes
Smartest person on the internet got himself a trollface pfp
@@achsunshee shut the f up u don't know how cells work
before anyone makes this battery, if you intend to bring it on a flight, this battery would not be allowed as the maximum capacity allowed on board is 100Wh. For standard 3.7V li-ion packs, that's 27027mAh.
You should use higher gauge wire for battery terminal connection
should use a lower gauge wire
higher number means thinner
lower number gauge wire is thicker
I'm sure that's what he meant. Higher current carrying capability wire. But let's face it, if it's made in China, they will never get it through their heads to use proper size wiring. That goes for ALL of the electronic junk built in China.
@@richardchambers25660 to 80% electronics made in china
@@richardchambers256 *$100+ RC chargers enter chat*
YESS FINALLY SOMEONE WHO SPOT WELDS AND NOT SOLDER
to be fair, soldering can work if you do it well, but easier to weld and less messups
What is the difference between parallel and series in batt? Thanks for your help ❤
For example, if you connect 10 batteries in parallel, one of which is 3.7V and 4000mAh, then the capacity and voltage becomes 3.7V and 40,000mAh.
But if you connect them in series then it becomes 37V 4000mAh.
Perfect job !
Thank you🙂🤝
@@ErCanEverythingноутбук заряжает?
@MrRest1993 Yes, watch this video
ua-cam.com/video/HSpSuCGFK5s/v-deo.html
Is that DIY spot welding too sir?
Yes it's welding machine
There ain't no way that is 40,000mAH. You'd need 12 batteries if you could find 3500mAH batteries. But as most are around 2600, you'd need 15-16 of them.
Those are 21700 cells, not 18650! They have 4Ah each
Actually you Can easily...
Exemple:
LG Mj1
Panasonic NCR18650CA
@@dulcidy no you can’t. They are 3500 mAh at best
Yeah... Read again, he said it's possible if we Can find 3500 mah cells.
I literraly gave you 2 exemples of the 2 biggest battery makers 3500mah cells...
These cells are 21700 with a capacity of 4000mAh. They are not 18650
Check 1st pinned comment for full video🙂
Not a power bank it's a hand grenade😂😂
Get in the car 🚗😂❤🎉
@@harishgaming007 what do you mean??
@@ranveerrajput8830 Brother I just Say "Get In The Car🚗" which used in BGMI/PUBG MOBILE 📲😁👍🏻😅😂
Interesting, what would say to me airport security to this DIY
I think they will offer to use it as an emergency power supply at the airport😅
@@ErCanEverything to power what? A led lamp for half an hour? Nah bro, bad joke
Low heat dissipation.
Low maintainability. it needs latches or screws.
Low safety of touching the contacts of the circuit on high-current elements. in this case, it is possible to shift the elements in the adhesive layer.
And make rounding on the body! brick is not too aesthetic.
For the rest - the combination of individual elements of the scheme is good.
How many amps do those tiny wires carry before catching fire ?
It's a freakin power bank, not a car jumpstarter...
Those thin wires are used for balancing voltage between cells while charging powerbank. When powerbank is being discharged, current passes through nickel strips, thick black and red wires.
@@vismakan6941 I did not see any thick wires.
@@vismakan6941 If you watch the video, all the balancing wires and the power wires is on the same thickness.
Enough ( will use less than 3A if it's a 63w power bank )
Any link on where to buy this BMS online ?
what gauge wire did u use sir?
For balancing I used 26AWG but for B+ and B- I used 20AWG and 0,15 x 8mm Nickel Strip
На клей, чтоб потом не разобрать?
сразу видно) инженер... я тоже первое что подумал "а нахера на суперклей? хер потом разобрать сможеш если починить нада бцдет"
I can immediately disassemble with a hammer and print a new box🤷
@@ErCanEverything зачем ломать и заново создавать, если можно создать коробку с местами для винтов? 😊
Да xýли говорить?Сколько таких видео с неконструктивными конструкциями?Одни-электроэлементы к кроне 9вольтовой припаивают,тут-детали на клей.Какой-то бред происходит.
Те самые арабы на задней парты во время контрольной:
Where do you get the kits for the mother board for this kind of thing??
In the description of this video there is a link to the long video and in its description it has everything.🙂
ua-cam.com/video/y_3yFDpwFBk/v-deo.html
ALIEXPRESS
There all over the Chinese electronics websites.
Will it charge the battery too if I plug a charger on those ports?
The red thermostat wire should be between the battery
Батареї треба було в холдер, закріпити термоклеєм по бокам до корпусу, тоді було б гарна ремонтопридатність. В плата ця дійсно гарна
nice bro..i hope nxtday i do this
Bueno al menos esa board se ve de más potencia not the cheapest one with a tiny chip
And température ?
When I read carefully the video's title then I just 💀⚰️😐
And when I saw the pcb you use then I live longer ❤
😂😂
I really value PCBs that support fast charging, so my video titles always have the correct information. The battery is 8Ah but is equivalent to a 3.7V 40,000mAh Power bank
Full video ua-cam.com/video/y_3yFDpwFBk/v-deo.html
I like to make this bower bank but unfortunately it is not available in my contry this module but allready i ll made power bank and i make some projet by arduino and raspberry pi, have a nice day 4 all, 🎉❤ good jop, thank u
Where did you get the circuit board?
I really like the thought of making such PB but using fevi quick is bad idea. Packing should be re opened easily if need to check it.
VERY THANKS YOU
Is there a housing and circuit for one or two batteries to make it more portable?
Clean and amazing work 👌🏾
Would you sell one of these? I need one that fits the bottom of a specific backpack with as many batterys as can fit. Would pay according to what it is and obviously for your time and skill/equipment. Was going to space 3 stacks in PVC pipe but this is nice.
You did not just connect that battery pack to the board with what looks like 20ga wire at most?
Link to buy the circuit module pls
40 amps ?
How to prossesd to buy your 4000 mh power bank your macking
and BOOM!
Сразу видно было, б/у аккумуляторы.
Bro want to ask u u r taking some tutions of learning them my bro wants to learn
So, what is the electronic stuff?
What is pinning machine name
Wdp3a electronics must search 🔍 bhai 😊
Am sticking to the one I bought from the shop. Dont have the skills for this. 😂😂😂😂
Sorry sir, i want to ask. What is the name of the black colored tape (tape on battery) ? Thank you for replying sir.
Fita de manta
Dari mana anda dapatkan modul itu dan kenapa ada port tab c di modul nya sedangkan baterai yg di rakit 3s 8cell. klo baterai secara di seri 3.7 volt menjadi 12volt
Jakie super fast. Przecież super slow wyszło.
Is that safe? Also wouldn’t it heat up a lot??
एक हमारे लिए भी बना दो।
What type the module?
Для быстрой зарядки провода тонковаты, и я говорю не про балансировочные, а про силовые. Да и корпус можно было распечатать с элементами крепежа на болтики. Склйка непрактична
Hocam taşınabilir hoparlörüm için yaklaşık 20bin veya 30bin kapasiteyle sahip.bir batarya sistemi yapmak istiyorum, şarj bağlantısı ve güç aktarımı nasıl yapmalıyım acaba yardımcı olur musun?
Merhaba.
Bu modül her iki Type C soketinden pilleri şarz edebilir, aynı zamanda çıkış olarak ta kullanılabilirler.
Bu da uzun video ve modulün linki açıklamalar kısmında mevcut.
ua-cam.com/video/y_3yFDpwFBk/v-deo.html
The way the other phone shows battery charging screen again when you connect a phone to it is concerning. There could be a voltage drop for a moment there.
That looks like a homemade bomb
Mine isn't working it only shows zero not charging any solution?
Que cinta es la que utiliza para sujetar las baterías?
Norm. But why vertical this video?
How I can to see it on 27" display?!
Check 1st pinned comment for Full Horizontal video🙂
Pawer bank Beteri bulat mcm ni tk than. Klau bleh pilih pawer bank Beteri petak nipis lebar. Bgi mdah pham Beteri mcm henfon. Bru than.
What is the name of this tape?
I want to buy this modul? Can you give me link?
you dont want to buy it. even as a non power bank maker hobby guy i see that this is not a good product!!!
i hate the battery connection receptor of the board!
Super fast charging means also super fast dead for the batteries...
All the electronics
Buy Link
Below this video there is a link to the long video which has everything in its description. Links in short videos cannot be clicked.🙂
Pero no tengo 3D falto! aquí batería y caja power rápida
Hmmmm nice
what is the mini wielder called
How to get this type c output power bank circuit ❤
такую банку дешевле купить готовую.
Maximum 27000
Ні, ви не правильно рахуєте
GOOD JOB
I'm glad you liked it my Friend🙂🤝
Whats The Black tape?
velcro
you mean how replace the battery
Может кто объяснит почему он соединил плюс минус в один ряд?
Я так понимаю он неразборный планируется.
where "turbo charge"?
Маловато банок для 40 махов.
В видео используются не привычные многим 18650, а 21700. Там уже по 4 Ач на элемент набирается
@@Shadow_banned_by_UA-cam так там 4с1п там максимум и будет 5а
@@user-sg8qw2rp1x вообще-то 5s2p. Смотрите оригинальное видео
Hello.
What's your charging animation app name?
Thank you.
RIP CHARGING TIMES 😅
Cost?
Your power bank project cannot be accepted as it does not comply with the international security system due to the capacity classification being applied wrongly.
exilent ویر good
Лучше тогда автомобильный аккамулятор взять с собой ...
Dude built a roket
Bhai jaldi batao kitne rupaye Tak ka hai
How the display lit up if not connected with wires edit I see the pins now
Откуда там 40000 мА?
I mean, it's equal to 40,000 mAh Power bank if we connect all the batteries in parallel.
В видео используются не 18650, а 21700 элементы. Они имеют ёмкость по 4Ач. Умножь на 10
@@Shadow_banned_by_UA-cam А почему умножить на 10? Они там что, все паралельно соединены?
@@Alex_robles22 да, 10 параллельно. Это ж пауербанк. Всегда так
@@Shadow_banned_by_UA-cam Не, вот только не надо фантазий. Посмотри еще раз ролик, там четко видно что автор подключает акум четырьмя проводами к плате с вмонтированном BMS. А это значит...... правильно, акум построен по схеме 3S и 2Р. Или же 12 вольт.
कितने का बन गया भाई
А можно ссылки на комплектующие
Срочно нужна ссылка на такую плату повербанка, спасибо🙏💕
Please check the first pinned comment for the long video and its description has it all🙂🤝
Посилання дав, правильно оберіть модель
How many weight?
Hello bhai yah kya rupaye ka hai
It's not clear enough. Especially the arrangement of the batteries
Please check 1st Pinned Comment
मिलेगा कहां से
Perfect.
လုပ္ခ်င္တယ္
Зачем делать? Когда можно купить.
Beli box dan modul dmna
Biggest downside is that you made it so you have to destroy it to repair it.
10 batteries x 3600mAh max x 90% converter = Max 33.000mAh
The batteries are 21700 with a capacity of 4000mAh
For full video check 1st pinned comment