Ok, 1. Swap motor mounts over. 2. AC compressor 3. Power steering 4. Exhaust manifolds new gasket. 5. Intake manifold &ECU 6. New fuel injection rings- why not. 7. New wiring harness (loom). 8. Starter & Alternator. 9. Don't forget the Ground wire back on!! 10. Getting the ECU Map? Any good places in Northern California?
Hey Brother Man! How is the family doing? Hey I see your vacuum brake booster line carried over to the passenger side.. Did you add that? Because mine had a brake booster mounted on the back of the driver side valve cover on the original engine.... So when putting everything on the 3.5liter. There is not on to mound...it does have the gear in the cam to spin the booster...... So I see the is a Secondary 90° line off the back of the Intake manifold. Cap-off for 2006. But is that universal for the e350 option???
Just got the harness loom. They changed the part number. It ends with a 9133. They made a few harness consolidated to this model. Only 5 new ones left from Germany to here. And I got one.
Ok, 2006 and 2010 sedan or base model m272.961 RWD . Did you also carry over the Vacuum pump (brake booster) top back driver side motor? I have all gasket for the transfer over for all parts ready.. Next week Big Day!!! Sucks it might start raining ☔...
@@Moneygrip OK, finally getting the engine on the cherry picker to put in the Benz.. Still about the Vacuum line? You put the E350 line on correct? Because it reaches the Intake manifold in the back that would be plug with a Black cap on 2006 2.5.? Now does that eliminate the 1 line that leads from the old brake booster from the back to the front (Electric Change Over Valve) do you just cap it off? At the stem?
I got a blown motor on my c230. I have a donor engine( same engine ) . I don't have the key for the donor engine. Would I just swap the ecm from the bad motor onto the donor engine and the key will work?
Great video! I have a question... in my case I have a broken M272 2,5L model year 2006 and I want to swap it right into a M272 3,0L from a donor car (C Class C280 model year 2009). Do I have to on into any modification? Mountings? Accesories? Harness? ECU? In terms of computer, key, ignition map, etc. Thanks!
Nope theyre all the same the only thing you have to do is get the ecu thats in your car now mapped for the 3.0 tune. I sent my ecu to mercedes swap shop and got it changed from a 2.5l map to a 3.5l map
@@Moneygrip I have a W211 E350 and was told all I need to swap to a M273 V8 was the engine and the ECU from an S Class, E550, or CLS550 with the same V8. All other components are compatible. They've done write ups on the swap at the Benzworld forum...
Congrats. Great video. Many thanks for sharing. I have the opportunity to swap my current engine M272.940 (231cv) 3.0 to M272.969 3.5 (305cv). Did you change your ECU or not?
@@Moneygrip i was thinking the same for my 2011 GLK 350 but i dont got the time, but tbh i wish there was more mods for the m273 like i wish they upgraded the m273 with all the stuff with the sl350's m272 and have it make more power, the m273 i feel as if its capeable of like easy 500hp NA
@@Moneygrip ya know i was thinking about actually modifying a m273, theres a spec sheet of how they made the sl350 m272 have a higher rpm, might take a look maybe i can copy paste what they did to the m272 sl varient to the m273.
Ok,
1. Swap motor mounts over.
2. AC compressor
3. Power steering
4. Exhaust manifolds new gasket.
5. Intake manifold &ECU
6. New fuel injection rings- why not.
7. New wiring harness (loom).
8. Starter & Alternator.
9. Don't forget the Ground wire back on!!
10. Getting the ECU Map? Any good places in Northern California?
Thanks for the inspo might do this
Hey Brother Man!
How is the family doing?
Hey I see your vacuum brake booster line carried over to the passenger side.. Did you add that?
Because mine had a brake booster mounted on the back of the driver side valve cover on the original engine....
So when putting everything on the 3.5liter. There is not on to mound...it does have the gear in the cam to spin the booster......
So I see the is a Secondary 90° line off the back of the Intake manifold. Cap-off for 2006. But is that universal for the e350 option???
O,
Do you have the Specs:
Pattern and Torque for all of it?
What harness did you use your c230 harness or the 3.5 harness
Theyre the same harness theyre the same engine the difference is on the inside i bought a brand new c230 harness from the benz dealer
Just got the harness loom. They changed the part number. It ends with a 9133. They made a few harness consolidated to this model. Only 5 new ones left from Germany to here. And I got one.
Ok, 2006 and 2010 sedan or base model m272.961 RWD .
Did you also carry over the Vacuum pump (brake booster) top back driver side motor?
I have all gasket for the transfer over for all parts ready.. Next week Big Day!!! Sucks it might start raining ☔...
@@Hammersmith954 i changed the pcv stuff
@Moneygrip so just all new parts? Or did you upgrade your performance parts?
You said PVC stuff last time....
Do you have part Number #?
@@Moneygrip OK, finally getting the engine on the cherry picker to put in the Benz.. Still about the Vacuum line? You put the E350 line on correct? Because it reaches the Intake manifold in the back that would be plug with a Black cap on 2006 2.5.?
Now does that eliminate the 1 line that leads from the old brake booster from the back to the front (Electric Change Over Valve) do you just cap it off? At the stem?
@@Hammersmith954 however it was stock on the c230 is how my swap is i only chsnged the engine and got the ecu tuned
hell yeah man
I got a blown motor on my c230. I have a donor engine( same engine ) . I don't have the key for the donor engine. Would I just swap the ecm from the bad motor onto the donor engine and the key will work?
If youre swapping your engine for the same engine from another car keep your cars computer and use it on the new engine
Great video! I have a question... in my case I have a broken M272 2,5L model year 2006 and I want to swap it right into a M272 3,0L from a donor car (C Class C280 model year 2009). Do I have to on into any modification? Mountings? Accesories? Harness? ECU? In terms of computer, key, ignition map, etc. Thanks!
Nope theyre all the same the only thing you have to do is get the ecu thats in your car now mapped for the 3.0 tune. I sent my ecu to mercedes swap shop and got it changed from a 2.5l map to a 3.5l map
Or just use the ECU from a 3.0...
@@shawna7813 ecu has to be binded to the car
@@Moneygrip I have a W211 E350 and was told all I need to swap to a M273 V8 was the engine and the ECU from an S Class, E550, or CLS550 with the same V8. All other components are compatible. They've done write ups on the swap at the Benzworld forum...
@@shawna7813 correct and you need the m273 ecu binded to your car. If youre in the US hit up mercedes swap shop
Where did you tune the ME so I can tune them as well
Mercedes swap shop
hey man going to do this to my c230 6 speed, can you speak on the phone to go over what you need to do?
@@BeanieGarage hit me up on instagram trx.ron
So do you have the 722.998 transmission ( 7 speed) sportronic?
@@Hammersmith954 no 716.6 6 speed manual
@@Moneygrip so it won't line up if I swap to a 3.5?
I was so ready to order a 3.5 motor..
@@Hammersmith954 it doesnt make a difference what transmission you have
@@Moneygrip ok so E350 2010 3.5 . I will order it..
Thankbyou very much.
The video was very good.
@@Hammersmith954 make sure you swap the c230 harness to the 3.5l
I want to swap 2.5 to 3.5
Anything need to concern or need to replace as well?
Thankyou
@@Weekendtraveltrip basic items water pump and engine mounts and basic maintenance on the new engine
@@MoneygripThankyou.
What about gearbox and final drive should be replace or can use the same.
My car is 722.998.
what size wheels are you running.
Those were 17s i have 18s now
@@Moneygrip are the 18 better then the 17 ride feel wise?
Congrats. Great video. Many thanks for sharing. I have the opportunity to swap my current engine M272.940 (231cv) 3.0 to M272.969 3.5 (305cv). Did you change your ECU or not?
@@Rub3n_47 no i got the original ecu reprogrammed with the 3.5l mapping
@@Moneygrip thank you. 👍
@@Rub3n_47 i used mercedes swap shop for programming theyre in California
Thank you for your feedback. I need to find any Mercedes swap shop in Spain then.
did you get a 3.5L from a SL350 or an slk350? because those make a little over 300hp and rev to 7k rpm
Nah i wish i got that one
@@Moneygrip shit dude maybe you just might have to make another video lol
@@cyanide7167 originally i was going to put a 5.5L m273 v8 but i ran out of time and options
@@Moneygrip i was thinking the same for my 2011 GLK 350 but i dont got the time, but tbh i wish there was more mods for the m273 like i wish they upgraded the m273 with all the stuff with the sl350's m272 and have it make more power, the m273 i feel as if its capeable of like easy 500hp NA
@@Moneygrip ya know i was thinking about actually modifying a m273, theres a spec sheet of how they made the sl350 m272 have a higher rpm, might take a look maybe i can copy paste what they did to the m272 sl varient to the m273.
Pretty much a plug and play?
@@Slapp3 straight up
damn son, another car project? you never finished the banshee..
This one works it runs and drives this video is kind of old and i quit riding and sold everything because of my ex girlfriend
next time just buy a 3.5L benz and register it to drive on the roads of usa legally and save the hassle of doing a swap... @@Moneygrip
@@TimeLapseCarGuyBruno no you