Kawasaki Z900RS Puig Adjustable footpeg install

Swapping out the standard Puig race pegs, for a set that allows 20mm of adjustment in any direction. The goal was to get a little more up and back, but nothing radical. With the lower and more forward Rizoma bar I am using, I wanted my feet in a slightly more aggressive position to complement that, and hanging off the bike, etc...

[@jackojacko3545]

Thank 4 your instal video looking forward to the ride review .All the best Jesus bless ya from a brother from down under 🤠🇦🇺

[@Daves_Man_Cave]

Thanks 👍

[@infojn-um8jm]

Hi, those adjustable come in 20 mm or 40 mm, you had 20 mm right. Do you think 40 mm gives more options for adjustable angle and distance? I have a Z900 not sure if I should get 20 mm or 40 mm because I want to be more aggressive position.

[@arthurrodriguez2759]

Do you like those pegs? I’ve been thinking of getting them for my R6 but they look kind of short to me

[@Daves_Man_Cave]

In the end I ended up going with a complete aftermarket rearset... look in my videos section, its in there somewhere

[@justRORIRARU]

cool, like that :)
adjustingpins might stay in place for mounting issue just using bit of grease. 'm curious how new ergo feels on the road. 👍

[@Daves_Man_Cave]

Well, the position isn't all that much of a change. 3/4 of an inch. I may go and give the full rearsets another try, not that I replaced the bolt with a stronger higher quality stainless bolt...

[@barnab21]

great video,
the gear selector should be too far from your foot now ?

[@Daves_Man_Cave]

I was able to easily reach it with a slight adjustment. But, I wear size 12 boots, so maybe folks with smaller feet might have to reach a bit?

[@steveferrara259]

Great video. Where did you order from? I’d like to do the same for my z900…however my goal is to lower the pegs. Thanks

[@Daves_Man_Cave]

Revzilla is where I ordered from.

[@patland73]

Fantastic video, do you mind if i ask for the adjuster part number please, i can't find it on the web, and would love to install the kit on my bike, thanks a lot and have a good one! ;-

[@Daves_Man_Cave]

I believe this was the one, but double check the compatibility before you order:
www.revzilla.com/motorcycle/puig-rider-footpeg-mounts-kawasaki-suzuki?sku_id=1175617

[@patland73]

@@Daves_Man_Cave Thanks, yeah i just found the part number for the 20 mm adjuster plate, Puig 3838N. 😉