Do your Maintenance on auto scrubber

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 23

  • @GammerThumbs
    @GammerThumbs Рік тому +2

    I've been a custodian for 10 years for our school. I had to learn how to maintain the floor machine alone. Great vid.

  • @dlwright405
    @dlwright405 3 роки тому +1

    Mr Jeff... I don't know how I missed this video. We have a stand on scrubber. And I always wipe our squeegee off after use. And I would usually see some lines or streaks. Well after I saw this video I took the squeegee apart. I wound up getting a good handful of goop out of the system. Turned the squeegee blades over. And did my usual PM on it. World of difference with the scrubber now. No streaks. Great info on the blades. I was intimidated at first. But it worked. Ty sir

    • @mrjeffthecustodian
      @mrjeffthecustodian  3 роки тому +1

      Glad it work for ya. That’s the reason I do these thing. To help folks out.

  • @BillyMcclure-z4p
    @BillyMcclure-z4p Рік тому +1

    you just helped me change my squeegee thank you

  • @pamjlaws
    @pamjlaws 2 роки тому +1

    Hi Jeff. Thanks for the video and you may have solved my high pitch annoying scrubber noise(gonna check the filters tomorrow) THANKS AGAIN!!!

  • @chrisvanderslice7973
    @chrisvanderslice7973 3 роки тому +1

    Hi Jeff I like watching your videos I'm a custodian for Skamania County doing the government buildings very helpful been doing this for five yrs now.

  • @geddycostello8439
    @geddycostello8439 4 роки тому +1

    Hi Jeff, Good video and one thing that I'd like to mention is never go in reverse with the squeegees down on a walk behind floor scrubber it will destroy the squeegees front and back.

  • @wlms04
    @wlms04 4 роки тому +1

    Nice video, I wish every custodian was as good as you. One other thing I like to do is have the loop in the hose as close to the squeegee (far down) as possible; because it keeps water from dripping back onto the floor.

    • @mrjeffthecustodian
      @mrjeffthecustodian  4 роки тому +1

      Oh man your making my head swell lol. I still have a lot to learn. I just know there are a lot of untrained folks out there. Good folks to. They just need some guidance. That’s what I enjoy doing. Helping out.

  • @FireAlarmTech7.
    @FireAlarmTech7. Рік тому +1

    My work has the Tennant T300 floor scrubber

  • @bobcarty1433
    @bobcarty1433 Рік тому +2

    What I do every so often is wipe the rubber with rubbing alcohol. It gets the film off and makes them nice and tacky.

  • @thefurrymaster
    @thefurrymaster 4 роки тому +1

    We actually have a ice floor scrubber that has a square pad that you can strip the floor but i have worked with tenants both t 3 and t5 that have a round pads

    • @mrjeffthecustodian
      @mrjeffthecustodian  4 роки тому

      We have a tomcat square walk behind for floor stripping. Plus a Clark edge. Never wet strip again.

  • @beeffarmer8576
    @beeffarmer8576 4 роки тому

    Are you a head custodian?

  • @matthewehrmann2367
    @matthewehrmann2367 4 роки тому +1

    Hi Jeff

  • @antoniodalessio8027
    @antoniodalessio8027 Рік тому

    Thank you for shit if you want to hear it so much and I am alarm thank you I want to👍