In spanish Es lo mejor que he encontrado para aprender sobre Ansys. in English that is great!!! the best tutorial to learn, I hope that you put more as this,,
Broo... One doubt... 15:12 .. Here (in animation) in the converging section the pressure is decreasing ( red to yellow ) from inlet to the throat .. ... But at first (1:14) in the problem it is saying that the pressure in the converging section increases Any idea ..
Hey Sonu, In converging section from inlet to throat, the pressure reduces and velocity increases. No doubt in that. It happens as per the Bernoulli principle. I saw that in the video he said differently. I think he messed up that part
Good presentation Professor, please check your third PPT you mentioned that pressure increases and velocity decreases in the converging part of CD nozzle, which require correction. In the CD nozzle from inlet to outlet pressure decreases and velocity increases
KANNAN K Sir is CD nozzle the pressure increases in inlet comparing the exit divergent part !! what ever I have mentioned in ppt is right !! It's the core theory of C-D nozzle !!
Hello sir, If the flow is subsonic at the inlet of convergent part and the flow velocity decreases in the convergent part.. Then according to this, sonic condition can not be achieved at the throat. Think about this sir....
If flow is subsonic:- In convergent duct- flow accelerates. in divergent duct- flow decelerates. If flow is supersonic:- In convergent duct- flow decelerates in divergent duct- flow accelerates.
1:15 You mixed up pressure and flow velocity in the convergent nozzle. Nozzle section: Flow velocity v increase while pressure decrease. In fact in a laval nozzle flow velocity is increasing all the time while pressure is decreasing...
@Nir Modan don't apply the Boundary condition on to outlet.Since the outlet pressure is subjected to atmosphere,it should be given as zero to initiate CFD packages to compute and simulate the realistic analysis
thanks for the tutorial of yours first of all. Secondly, I have master degree thesis and wanna clear up it to you. Could you help me out for doing it in Anysis ? Wait for your support. Thanks a lot.
Hey, thank you for the neat video and explanation. Let's say I want to simulate a situation like this...but only for a nozzle which gives out drops or say a printhead nozzle. How could I change the settings and provide a similar stream line ?
That such could help me, I'm doing a thesis of a micro sprinkler irrigation and I need to simulate the fluid as it leaves the nozzle .. so you see has any tutorial or something that you can guide me. It would appreciate enough.
Can you plz let me know how to calculate boundary conditions (inlet and outlet) for given chamber pressure (P0) and nozzle expansion ratio (AR)? Need to get Normal Shock in it. Appreciate your help.
I'm trying to make a non-premixed combustion in Fluent, I will use liquid ethanol (C2H5OH) and liquid oxygen (O2). But I don't know how put the mol fraction from ethanol in the boundary tab to do PDF table creation. Do you know how to do this?
sir,i need a help in defining the length of the nozzle part. Is there are calculations available to find the overall length or the inlet length of the nozzle.
Hello, I have made geometry for 3d titling nozzle assembly. Have to do pressure and flow analysis at each point. what boundary condition i should put and how to solve it . Can i send u geometry of my problem so that you can tell the solution . Regards.
Please, can you help me to simulate the condensation process inter the microchannels. Especially the phase change term is very urgent. thank you in advance
Nir Modan if u reduce the pressure than then inlet u get reverse shocks, As per Continuity equation -The mass flow Inlet is same at the outlet and We consider the pressure at Outlet as Pressure farfield or Pressure = 0 to Simulate the exact atmospheric condition
Dear sir I am research student I have seen your tutorial of ANSYS Fluent workbench C-D NOZZLE this is helpful but sir I am doing research on square nozzle .I am concentrate on plume area where shock is produced . Can you send me HELP or tutorial regarding quadrilateral element meshing and SET UP(pressure Input, far field,output) I am sending some photos of my work and description. PLEASE send me some help regarding ANSYS FLUENT Regards Devendra Lohia
Broo... One doubt... 15:12 .. Here (in animation) in the converging section the pressure is decreasing ( red to yellow ) from inlet to the throat .. ... But at first (1:14) in the problem it is saying that the pressure in the converging section increases Any idea ..
PLEASE HELP! when i click setup and edit program says " a dialog is open in the FLUENT Application. Please close the dialog before trying this operation" i couldnt figure out to problem
Broo... One doubt... 15:12 .. Here (in animation) in the converging section the pressure is decreasing ( red to yellow ) from inlet to the throat .. ... But at first (1:14) in the problem it is saying that the pressure in the converging section increases Any idea ..
Broo... One doubt... 15:12 .. Here (in animation) in the converging section the pressure is decreasing ( red to yellow ) from inlet to the throat .. ... But at first (1:14) in the problem it is saying that the pressure in the converging section increases Any idea ..
In spanish
Es lo mejor que he encontrado para aprender sobre Ansys.
in English
that is great!!! the best tutorial to learn, I hope that you put more as this,,
Si vos decís. El año que viene empiezo Ing aeronáutica y se ve que esto es importante
Thanks to this video, I could complete my mini project in college
Broo... One doubt... 15:12 ..
Here (in animation) in the converging section the pressure is decreasing ( red to yellow ) from inlet to the throat .. ...
But at first (1:14) in the problem it is saying that the pressure in the converging section increases
Any idea
..
Hey Sonu,
In converging section from inlet to throat, the pressure reduces and velocity increases. No doubt in that. It happens as per the Bernoulli principle.
I saw that in the video he said differently. I think he messed up that part
@@abhishekmc5483 ssss... Thanks broo..👍👍👍
Good presentation Professor, please check your third PPT you mentioned that pressure increases and velocity decreases in the converging part of CD nozzle, which require correction. In the CD nozzle from inlet to outlet pressure decreases and velocity increases
KANNAN K Sir is CD nozzle the pressure increases in inlet comparing the exit divergent part !! what ever I have mentioned in ppt is right !! It's the core theory of C-D nozzle !!
no the pressure decreases in the whole process as the velocity keeps on increasing
Hello sir, If the flow is subsonic at the inlet of convergent part and the flow velocity decreases in the convergent part..
Then according to this, sonic condition can not be achieved at the throat. Think about this sir....
If flow is subsonic:-
In convergent duct- flow accelerates.
in divergent duct- flow decelerates.
If flow is supersonic:-
In convergent duct- flow decelerates
in divergent duct- flow accelerates.
1:15 You mixed up pressure and flow velocity in the convergent nozzle. Nozzle section: Flow velocity v increase while pressure decrease. In fact in a laval nozzle flow velocity is increasing all the time while pressure is decreasing...
doppeldeluxe Instead of giving velocity inlet 442 m/s I have used 3bar pressure inlet , both are same!!
@@CADDMASTER_Charles_G_Martin Then it should be M>1. You have mentioned M
@@sri78hari came back after 4 years lol
@@jeshuaray374 sorry, I didn't get the joke.
@@sri78hari it's just funny you waited 4 years to respond.
@Nir Modan don't apply the Boundary condition on to outlet.Since the outlet pressure is subjected to atmosphere,it should be given as zero to initiate CFD packages to compute and simulate the realistic analysis
Good of you to put in the time to put something online. Any future videos, could you remove the mouse clicking noise, as its very distracting.
thanks for the tutorial of yours first of all. Secondly, I have master degree thesis and wanna clear up it to you. Could you help me out for doing it in Anysis ? Wait for your support. Thanks a lot.
Hi bro have some doubt 7659984506 wts up..?
Sir can you explain in detail regarding having negative pressure and what is operating pressure in this simiulation.
Excelent explanation sir!
Great tutorial. Thank you
Pressure increase and velocity decreases in convergent section during subsonic flow. You have to correct it. A blunder.
thank you so much you saved my life
Hi
Thanks for the video. Very helpful.
Many many thanks. What is NPR(nozzle pressure ratio)? and What is NPR in this simulation?
Thanks for the tutorial
very nice and interesting video! thank yo very much sir!
I don't understand the part of Monitor . I have the version new 19.2
Sir, please make a tutorial on SLOSHING OF LIQUID IN A TANK in FLUENT. i need it for m project.
very nice tutorial sir!!.. Cud have been a li'l slower!!... nonetheless, very good n helpful!!.. Gracias!!
Hey, thank you for the neat video and explanation.
Let's say I want to simulate a situation like this...but only for a nozzle which gives out drops or say a printhead nozzle. How could I change the settings and provide a similar stream line ?
Is there anyway you could model the same nozzle exhausting to the atmosphere and upload a video? I've been trying but not getting the results.
Nice tutorial, better give more reasoning for options selecting then it will be highly appreciated
That such could help me, I'm doing a thesis of a micro sprinkler irrigation and I need to simulate the fluid as it leaves the nozzle .. so you see has any tutorial or something that you can guide me. It would appreciate enough.
Can you plz let me know how to calculate boundary conditions (inlet and outlet) for given chamber pressure (P0) and nozzle expansion ratio (AR)? Need to get Normal Shock in it.
Appreciate your help.
Thanks so much sir. It was very useful
Hello, Why did you choose Density Based as solver ?
why as a result of plot at velocity there is no mach number?
Could you also show the Temperature distribution
I'm trying to make a non-premixed combustion in Fluent, I will use liquid ethanol (C2H5OH) and liquid oxygen (O2). But I don't know how put the mol fraction from ethanol in the boundary tab to do PDF table creation. Do you know how to do this?
how is that going?
Could you please help me,i didn't get mapped face meshing, simple i am getting face meshing.please help me
sir,i need a help in defining the length of the nozzle part. Is there are calculations available to find the overall length or the inlet length of the nozzle.
dear sir, if flow within a nozzle is symmetric about its axis, half of the model is sufficient with symmetry boundary. isn't it ?
The Symmetry will not give exact approximation !! You can simulate and check it
+CADD MASTER i understand. thank you.
Hello,
I have made geometry for 3d titling nozzle assembly. Have to do pressure
and flow analysis at each point. what boundary condition i should put
and how to solve it . Can i send u geometry of my problem so that you
can tell the solution .
Regards.
Thank you very much sir
Where could I find the program
Hello, Thanks for the nice video. Please can you let us know what is the operating pressure?
Venkata Ravindra M V I have applied 3 bars u can try it wit 1 bar also
Am i mistaken, or did he run the simulation in 2 dimesions. If so, why?
2d is easier for computation
Please, can you help me to simulate the condensation process inter the microchannels. Especially the phase change term is very urgent.
thank you in advance
Sometime I think how the pressure is going the negative value pls explain it
Hi, can you analyze the flow of the plate heat exchanger ?
THANK YOU SO MUCH SIR
hi sir, can you please give me procedure to do model analysis of viscoelastic beam in Ansys Apdel.top and material is steel, core material is rubber
Can You please post a link for downloading the software?
i'm trying to make a shockwave in the divergent part. how should i do that? i tried to raise the outlet pressure but nothing happend.
Nir Modan if u reduce the pressure than then inlet u get reverse shocks,
As per Continuity equation -The mass flow Inlet is same at the outlet and We consider the pressure at Outlet as Pressure farfield or Pressure = 0 to Simulate the exact atmospheric condition
WHY IS PRESSURE NEGATIVE? :(
Can this be done on student version of Ansys
hi , how i can import a data file of inlet velocity in fuent?
how can i download this software please share me link to this software
Thanks a lot!
Dear sir
I am research student I have seen your tutorial of ANSYS Fluent workbench C-D NOZZLE this is helpful but sir I am doing research on square nozzle .I am concentrate on plume area where shock is produced .
Can you send me HELP or tutorial regarding quadrilateral element meshing and SET UP(pressure Input, far field,output) I am sending some photos of my work and description.
PLEASE send me some help regarding ANSYS FLUENT
Regards
Devendra Lohia
Can anyone tell me how to bring the outline tab in mesh generator.It just went off.
Is it possible to have paper for this project? It would be very much helpful for my upcoming ansys validation!
Broo... One doubt... 15:12 ..
Here (in animation) in the converging section the pressure is decreasing ( red to yellow ) from inlet to the throat .. ...
But at first (1:14) in the problem it is saying that the pressure in the converging section increases
Any idea
..
PLEASE HELP! when i click setup and edit program says " a dialog is open in the FLUENT Application. Please close the dialog before trying this operation" i couldnt figure out to problem
also, dp0\FFF\MECH\FFF.msh" not found! and this is an error
very helpful....thanks
Thank you so much.......
how could we verify the shock
SIR I NEED HELP OF HONDA STUNNER ENGINE EXHAUST FLUENT FLOW ANSYS .GIVE A GUDE SIR
Sir total pressure is empty
I have question that can find location of sonic line with fluent?if can how do this?thank you
Broo... One doubt... 15:12 ..
Here (in animation) in the converging section the pressure is decreasing ( red to yellow ) from inlet to the throat .. ...
But at first (1:14) in the problem it is saying that the pressure in the converging section increases
Any idea
..
Thank u
why do you have a 2,82 Mach and later you got only 609,4 m/s? the math is not right.. you should get close to 958 m/s.. Am I wrong?
Speed of sound is higher at higher temps.
مرسی
Thanks sir
Broo... One doubt... 15:12 ..
Here (in animation) in the converging section the pressure is decreasing ( red to yellow ) from inlet to the throat .. ...
But at first (1:14) in the problem it is saying that the pressure in the converging section increases
Any idea
..
good
there is no such thing as mapped face mesh in mine
ok, in new versiin of ansys you need to use face meshing + sizings to get a structured mesh
click from the mouse can be heard more clearly than your voice
Not even audible on home theatre
Very very low audio
Not clear voice
please explain properly because we want to learn from basics. very bad explaination I am getting very bad words but I am controlling you.............
Not specified
u made it too fast
I've spent 5 hours😂