Plastic water pipe location on a large property.

Locating plastic water pipes on large properties, can be like trying to find a needle in a haystack and waste a lot of a Leak Detectors time. Creating an easy to identify noise in the pipe with a thumper, takes all the guesswork out of water pipe locating on those big jobs. In fact even on smaller jobs, if you're unsure of where the pipe has been buried. By clicking one of our Little Thumpa's to a tap and listening for the noise with any acoustic listening device, will give you confidence you are searching for the leak in the right place.
We have tested our 'Little Thumpa's' on many types of soils and on some very large properties. We have easily heard the thump for over 100m (300ft) and at depths up to 1m (3ft): through concrete, bitumen, bricks and soil. We have also used the thumpers to locate pipes in walls. If you are not sure where the pipe (no mater what material the pipe is made of) is located, in the ground or in the walls, creating a noise in the pipe with a thumper will make identifying where it was installed simple.
The 'LITTLE THUMPA' has been developed and built-in Australia. It is fitted out with a brass female click-on tap connector and a brass male connector underneath enabling a waste hose to be attached to drain away used water. The device is water-resistant so if there's a leaky valve on the tap with water running everywhere it will have no effect on the thumper's performance. All electronics inside the case are sealed in resin making the unit very reliable.
The device requires 12v power and to save the hassle of another battery to keep charged, we recommend using your own 18v cordless tool battery with one of our adapters fitted with a 12v outlet socket and USB outlet for charging your phone. We have adapters for Milwaukee 18v and 12v, Makita, Hitachi, Dewalt, Bosch, and Metabo.
We also have Lithium Iron Power Banks which can do the job but shipping restrictions make them not possible to send by air freight. If you don’t use any of these brands, please message us and we can work out another option.
Specifications:
Click-on brass tap connector
Click-on brass hose connector
All electronics sealed in resin
S/S waterproof LED switch
Rugged ABS sealed housing
Flow bore: 2.5mm
Operating Pressure: 1000Kpa
Maximum Pressure: 1500Kpa
Operating Temp: -10 to 80 °C
Coil Voltage: 12v
Coil Power: 6.5w
From less than US$530 we can deliver a ‘Little Thumpa’ along with a cordless tool adapter, to most countries*. And for peace of mind, you also have a 30 day money back guarantee.
Check them out on our website by clicking on the link in our bio👉
🔹SATISFACTION GUARANTEED 💯
🔹30 DAY $ BACK GUARANTEE✅
🔹1YR REPLACEMENT WARRANTY✅
🔹DEVELOPED AND BUILT IN AUS🇦🇺
🔹RUGGED, RELIABLE💪 ⠀
🔹AFFORDABLE🤩
🔹TOOLBOX ESSENTIAL🛠
👉www.waterleaksolutions.com.au
*There are some issues with shipping to South Africa due to COVID. Please message me direct and we can work out alternative shipping.
#plasticpipelocation #locatingplasticpipes plasticpvcpipelocation locatingplasticwaterlines #leakdetection #waterleakdetection #waterleaklocation #servicelocation #utilitylocationequipment #waterleakdetectionequipment #leakdetectionequipment #waterpipelocation
#plumbingequipment #locatingplasticpipes