Axial SCX10 II with Axial SCX10 III Portal Axle Toyota Mojave II Hard Body Half Cab Crawler Build
Вставка
- Опубліковано 29 вер 2024
- Super excited to share a new build for 2022! Axial 10.2 with Axial 10.3 Portal Mojave II Hard Body Half Cab Crawler Build
I like the rim's and deadlocks !!!
Thank you!
Where did you get the fatter links from? Thanx...
Axial
Do you have the link or name for the side body mounts?
www.amazon.com/gp/product/B07JV9PVXZ/ref=ox_sc_act_title_1?smid=A28FINAA608H1W&psc=1
Very cool and beautiful crawler, excellent work my friend!)🥰🤩💯💥👍👏
Thank you! Lots more to go!
If you flip your skid plate around the driveshaft lines up perfectly for the front off set pumpkin and also helps with torque twist
Thank you! I will take a look at that.
That is also a way to reverse your drive on the 10-2, if you have a timed motor, (I believe the HH pro is timeable) motor direction will matter significantly. So use the plate switch to
A. Move weight.
B. Correct motor direction
C. Provide interior room for certain builds.
D. Compensate for different pumpkin offsets.
Remember, this only works with direct drive output transmissions, like the three gear where both outputs spin together at the same ratio.
Have fun.
@@brianellison3525 Hey Brian thanks a ton! Great advice.
Hello may i have tutorial on this
I never ended up doing this due to the motor rubbing on my chassis rails.
Nice video my friend showing support to your channel
Thank you very much!
@@jaysrcs You are welcome ..have a look at my channel
Sub’d ✌️
@@jaysrcs Thank you bro make sure you look at the videos🙂 I made them for people like you..
What length shocks u using and how much did u cut off the spring for the shocks
90mm length.
can you send me link to that hard body and the side body mounts ?
www.amazon.com/dp/B07JV9PVXZ?psc=1&ref=ppx_yo2_dt_b_product_details
how long is the panhard rod if I may ask? thanks!
I don't have this truck anymore so I'm sorry I can't give you the specifics and I would hate to guess. Panhard bars were the hardest and I used to get all mine from Hardcore RC.
Do you have link to hardbody mounts?
www.ebay.com/itm/402388869490?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=gklw8bajs5c&sssrc=2349624&ssuid=&var=&widget_ver=artemis&media=COPY
Here because I saw the KK Crawler sticker
I live in Fond du Lac been there once
We try to make KK during the summer. Great place, great people! Maybe we’ll see you there sometime!
@@jaysrcs That gonna be awesome
I know where Fond du Lac is but where is Krawler Kayon?
Hi. Being a complete virgin on crawlers, could you explain why no oil in shocks.
Hello! With stiffer internal springs I just run a drip for lubrication. I have since changed and run a full shock body with 60wt due to the weight of the hard bodies.
Nice
Thanks
What links did you use for the panhard and drag link? Awesome build!
Samix front shock tower comes with panhard mount. The panhard bar is custom. I think I changed the end links a few mm to help offset the axle sway. All other links are from a 10.3.
Sweet looking build I’m diggin the truck pattern scheme
Thank you!
Awesome job can you shoot me a link for that front bumper? Can't seem to find it anywhere
Thanks! I tend to use Scalerfab or IERC.
www.scalerfab.com/collections/2-front-bumpers
iercscaler.com/ols/categories/bumpers
cool build!
Thanks!!
Does the panhard mount hit the axle ?
It does just a tad.
Did you have to change any trans gears to fix gear ratio?
No I did not. Direct bold up.
do they make a back half cage to install to the cab?
I don't believe they do.