2019 Kia Stinger GT K&N Typhoon Air Intake upgrade | Modified

Поділитися
Вставка
  • Опубліковано 24 сер 2024
  • The Kia Stinger GT is already a powerful car straight out of the factory. With a 272kW twin-turbo V6 and rear-wheel drive, it's bound to be a lot of fun. This particular Kia Stinger GT belonged to a friend of ours. We were looking at the factory intake and were keen try our hand at a DIY upgrade to see how easy it would be to upgrade the air intake system with something much less restrictive. So that's what we did.
    We completed the job in 70 minutes, which isn't bad for a job that you need not much more than basic hand tools and some common mechanical knowledge (and we mean common, not much is needed in terms of experience). Be sure to comment below if you've done any cool upgrades to your Kia Stinger GT. We'd love to hear about them!
    You can read more about this car in our review here:
    Link to K&N Typhoon Intake System for Kia Stinger GT: www.knfilters....
    Follow us on Facebook:
    / drivingenthusiast
    Follow us on Instagram:
    / drivingenthusiastaustr...
    If you are looking to buy a new car and you live in Australia, we can help. Our dealer network and bulk-buying power can save you $1000s. And better still, you don't have to haggle with salespeople - we'll do it for you. Head over to our car buying page for a free, no-obligation quote: drivingenthusi...
    drivingenthusi... celebrates the joy of driving. We like cars, but we love driving. Did the chicken come before the egg? In a similar way, driving doesn’t come without cars. So we try to provide coverage on vehicles that would be of interest to driving enthusiasts in some way.
    #kiastingergt #knfilters #performanceupgrade

КОМЕНТАРІ • 56

  • @dylanw890
    @dylanw890 4 роки тому +5

    Very nice set up! I love how clean this is! Will definitely be buying this for my Stinger but I want to upgrade the turbos as well.

  • @fendushi
    @fendushi 4 роки тому +4

    I have truly enjoyed watching this, would never have the guts to do it myself though. Thanks for uploading!

    • @STERLING430
      @STERLING430 3 роки тому

      We got it bro👍🏽! Lol .. I feel the same with my 22 G70. I gotta watch all the stinger vids.

  • @kishothepilot
    @kishothepilot 2 роки тому

    That turbo whistle is beautiful

  • @WarTheory
    @WarTheory 4 роки тому +4

    Great video...I picked up the K and N because of you thanks!!!!

  • @adambittner6187
    @adambittner6187 25 днів тому +1

    I have this setup, as far as removing ,cleaning and re-installing do you only have to remove the filter part only it's very tight clearance?

  • @nathancampione5704
    @nathancampione5704 4 роки тому +1

    Nice stroll through the bottom of mt Kembla at the end I see. 🤙🏻

  • @NorthYorkCountry
    @NorthYorkCountry 3 роки тому

    Very cool video. Thanks for sharing.

  • @Alexander-zs5rj
    @Alexander-zs5rj 3 роки тому

    Exhaust Sport/Race (Complete with downpipe or after downpipe)
    ua-cam.com/video/9eAA7P5JRc4/v-deo.html
    ua-cam.com/video/IHhzPm00xjY/v-deo.html

  • @user-bt3nw4hf2f
    @user-bt3nw4hf2f Рік тому +1

    Good

  • @Geo-iz4oi
    @Geo-iz4oi Рік тому +1

    Do you have any idea why the radiator hose started leaking after installation? We didnt even touch that hose, as far as I remember. We adjusted the clamp, and it seems like it's okay. But the fan is absolutely going crazy.
    Is that normal?

  • @RomanDeHonney
    @RomanDeHonney 4 роки тому +2

    The intake hose on the driver side had to be cut when I did it

    • @mysneaksaintbeat
      @mysneaksaintbeat 4 роки тому +1

      Do you mean the bov hose? Your supposed to swap the hoses in this install per the instructions for a perfect fit.

    • @LoneStarStinger
      @LoneStarStinger 3 роки тому +1

      Same

  • @consumerthis3169
    @consumerthis3169 3 роки тому +4

    Unless you have a tune and exhaust , I wouldn’t expect any real HP gains, but the sound alone is worth it IMO. You can hear them turbos more.

  • @sparkyjkj11
    @sparkyjkj11 3 роки тому

    Is there a rubber part to connect the metal pipe onto the turbo aswell.. nice job and it sounds like it's got blow off valves now aswell.. is that the standard noise after fitting the kit?
    Cheers

  • @sk8punk318
    @sk8punk318 4 роки тому +7

    I dont know if that can really be considered a real “CAI”

  • @NoChaserNoChaser504
    @NoChaserNoChaser504 4 роки тому

    Did you need a tune after applying this intake?
    And do you know how much torque you’ve gained?

  • @mcm6453
    @mcm6453 3 роки тому +2

    What’s the exhaust on this stinger ?

  • @Sticknmove77
    @Sticknmove77 3 роки тому +1

    Do the intakes receive cold air from the factory air ducts in the front of the vehicle? Im not sure if I saw a connection to the ducts on the heat shields.

    • @chadrichards8930
      @chadrichards8930 2 роки тому +2

      they do

    • @Bond2025
      @Bond2025 2 роки тому +2

      I would never make any modification to the car as it is well balanced the way it is, so does not need anything extra.
      Think about why major car manufacturers do not fit that sort of air filter or piping on their cars and never will.
      The boy racer market is one that provides new victims every year as it never dries up. People that can not afford the car they want will pay thousands ofr bolt-on bits that do NOTHING for performance, they make matters worse in most cases or just cause damage.
      For 20 years I tested every kind of air filter on the market on petrol and diesel engines with carbs, fuel injection and turbos. NOT ONE bolt on air filter made the slightest bit of increased performance. What they did was caused damage and a loss of performance on a rolling road and created much more noise. You can hear the air being restricted - manufacturers lie to cover this restriction noise and say it is "induction roar" to try and claim it is somehow making power. It isn't, it is air being stopped.
      Foam filters were rubbish, they degraded in no time, even when covered in oil they would sag and degrade.
      Cotton between wire mesh and the ones covere din oil were just as bad. The oil would come off them in turbo cars and end up over MAF filters, one of them cost me £200 during a test when oil from a K&N broke it. The company refused to honour their guarantee so I can not trust them or recommend any of their products.
      The problem with small air filters is that they have a small surface area some 11 times smaller than the correct paper one.
      That means holes have to be more than 11 times bigger than in the paper one to even pass the same amount of air - that is when it doesn't get filtered as the holes are far too big. You are allowing unfiltered air in to the engine and it doesn't meet the standards the engine required. With some you might as well just completely remove the filter.
      With small filters, they block much faster and performance drops completely - but you can be further scammed in to buying cleaning kits and oil ! A paper filter can pass as much FILTERED air as required by engines at FULL RPM continuously even when 80% blocked. They are much better.
      So called indiction kits are useless as they suck hot air from around the engine and lower performance. Cold air feeds are a joke, the filter doesn't know to draw air from a pipe and not 360degrees around it, so they make no difference and are for show.
      If you want to buy useless products that do nothing for power or torque, go ahead, I guarantee they will be in the bin after a few months and the original paper filter back on. Cars are designed in a particular way for a reason. The only difference you could make to original intakes and air filter housing is to maybe add some heat shielding, but effects are minimal.
      Don't confuse NOISE with POWER, the same way as you should not confuse SMOKE with POWER on diesels, it usually means something is broken or some idiot is pumping excess diesel in during the exhaust cycle for show.

  • @TriniS2k
    @TriniS2k 2 роки тому

    Is a tune needed for the intake?

  • @davidvainickis4070
    @davidvainickis4070 8 місяців тому

    how do you get that rubber seal around the heat shields

    • @Bostonn617
      @Bostonn617 5 місяців тому

      Just pushes on - little bit of a pain but not to hard. It has a slit on it and you just gotta work it around the shield

  • @dasa5023
    @dasa5023 4 роки тому

    Fucking love it

  • @dasa5023
    @dasa5023 4 роки тому

    Does it makes this pppssshhh sound when your driving like accelerating and decelerating as well?

    • @drivingenthusiastaustralia
      @drivingenthusiastaustralia  4 роки тому +1

      When you back off from heavy throttle, you get that wastegate sound. The K&N intake makes the sound much more obvious than the standard setup.

    • @TheBrandonliteyr
      @TheBrandonliteyr 4 роки тому

      Just remove the bov recurculating tube frim the intake and bov, block off the intake side with a chair bottom. I have friends with turbo k5s and we did it

    • @WarTheory
      @WarTheory 4 роки тому

      Brandon Raner what does closing that do?

  • @stockey
    @stockey 4 роки тому +2

    They should have an opening in the front, to let some fresh air come in from the grill.

    • @mike_t_007
      @mike_t_007 4 роки тому +1

      They do! Car also has a giant front mount intercooler which... Draws air into the front of the car lol

  • @stephenchance6908
    @stephenchance6908 3 роки тому +1

    Do you have to disconnect the battery??????👍🏻

  • @scorpiojuan1966
    @scorpiojuan1966 4 роки тому

    What exhaust?

    • @Alexander-zs5rj
      @Alexander-zs5rj 3 роки тому +1

      Bastuck Exhaust is a good choice 😉
      ua-cam.com/video/9eAA7P5JRc4/v-deo.html

  • @alfredzhong437
    @alfredzhong437 3 роки тому

    what could we buy now in 2021? it was ban and out of stock on K&N website,do you have something plan B?

  • @Twittavelli
    @Twittavelli 5 років тому +1

    Any HP gains ?

    • @horseome1
      @horseome1 5 років тому +6

      They say about 9hp gain... Probably more for sound than performance.

    • @Twittavelli
      @Twittavelli 5 років тому +1

      @@horseome1 I'll take the 9 HP too lol

    • @horseome1
      @horseome1 5 років тому

      @@Twittavelli Never Hurts ;-)

    • @eeshunique
      @eeshunique 5 років тому +4

      without a tune all those manufacture claims are b.s.

    • @tcathunder
      @tcathunder 4 роки тому +9

      @@eeshunique Wrong... Computer adjust for fuel air mixture on it's own..

  • @victorsmolica5549
    @victorsmolica5549 4 роки тому

    does exhaust and intake upgrades to the stinger affect your warranty

    • @bobsg35
      @bobsg35 3 роки тому

      Victor Smolica it shouldn't, but that depends on your dealer.

    • @flameangel202
      @flameangel202 3 роки тому

      My local Kia dealer advised that Cai's are fine, only if you mess with the car's ECU will you default the warranty. So I will get Cai's at some stage as well as rams.

  • @kep4uk626
    @kep4uk626 2 роки тому

    This car bulshit

  • @michalbudzinski9563
    @michalbudzinski9563 4 роки тому

    the computer shows any engine error when you put in this intake? Or you have to reprograme it?

    • @drivingenthusiastaustralia
      @drivingenthusiastaustralia  4 роки тому +1

      No need to reprogram it. The computer adjusts automatically. Best result after about an hour of driving.

    • @daytonasayswhat9333
      @daytonasayswhat9333 4 роки тому

      I would think that you should always reprogram after a mood like that.