The 3D Printer for Everyone | Bambu Lab A1 Mini Full Review

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 101

  • @robwray3563
    @robwray3563 23 дні тому +5

    I have the Bambu A1 mini. It is very impressive. My first 3D printer was a clear acrylic frame Folgertech kit back in 2013. 3D printers have come a very long way since my first printer. Thanks for the great video.

    • @RadDadsPrintLab
      @RadDadsPrintLab  22 дні тому

      Thanks for sharing

    • @Yorsem
      @Yorsem День тому

      Did you get the A1 mini combo? I want to get the regular A1 mini but I don't see how to mount the filament spool for printing?

    • @robwray3563
      @robwray3563 День тому

      @@Yorsem a spool holder mounts to the back of the printer. It's a nice little setup.

  • @alexishernandez5966
    @alexishernandez5966 3 місяці тому +10

    We have that printer, and as a first time 3d printer. I'm impressed on the quality of print that we get from that

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому +1

      Its really amazing how good it prints even compared to the more expensive printers

  • @swartzlib7
    @swartzlib7 7 днів тому +1

    3 months ago there was a firmware issue causing leveling issues and excessive purging. This was fixed a couple of weeks later. Right now, this machine is in a class of its own for sure and if you have one you would only replace it when it breaks or when you need to print bigger parts.

    • @RadDadsPrintLab
      @RadDadsPrintLab  5 днів тому

      I Picked the Mini up in august so that sounds about right!

  • @timmyj5575
    @timmyj5575 3 місяці тому +13

    first printer: Ender 3 V2 (from second hand so it was like 130eur)
    anyway now that i saw your great video the A1 Mini is definitely on my wishlist!

    • @RadDadsPrintLab
      @RadDadsPrintLab  3 місяці тому +1

      Thanks! Hoping to check out the full size A1 in the future also.

    • @cesarcesar1961
      @cesarcesar1961 11 днів тому

      Ender 3 is also my first printer. Such a headache 😅

  • @mauroo150
    @mauroo150 3 місяці тому +4

    My first printer was a Anycubic Kossel. It was fun to see it working, especially in vase mode. it was very loud though and the bed leveling was a mess. Really fucked it up beyond repair when I tried fitting it with a silent stepper motor board.. Now this little thing is top of my list!

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому +1

      Its crazy to see those types of printers work.

  • @AmariBowsershorts
    @AmariBowsershorts 11 днів тому +2

    I'm trying to get into the 3d printing hobby, I was looking at a bunch of videos, and most people said to start out with the creality Ender 3 V3 KE (ridiculous name). i actually picked it up this Thursday, I set it up the same day. I kept getting a 2194 error ( cough cough creality 🙄)and at that point, I just returned it. So now I'm waiting for my bambu lab A1 mini to come and hoping it works. 😂

    • @RadDadsPrintLab
      @RadDadsPrintLab  11 днів тому

      I feel like I should get an ender just to see how good I really have it 😂. Enjoy your a1 mini, you’ll be up and printing really quick .

  • @taxijackmusic
    @taxijackmusic 2 місяці тому +1

    Started on a E3v2 in 2021. Bought a X1C w/ AMS this last January. Just purchased the A1 mini today, and I ordered the .8mm nozzle to go with it. Too many times when I'm running longer prints on the X1C I feel crippled that I can't print my various functional bushings, jigs, spacers for day to day garage projects. for $200 to gain concurrent prints is a steal. I'll likely buy another one in short order too. the .8 nozzle will work a treat for printing my small bits quick so I have lower downtime in the garage.

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому

      Couldn't Agree more! Ive yet to play with the .8 nozzle. I need to get one.

  • @MikeD0162
    @MikeD0162 2 місяці тому +3

    If you're just starting out like I was a week ago the A1 mini is hands down the choice. Also I know it's $150.00 more but get the AMS it's well worth it. If you have kids even younger ones this is very easy to use to start out. If you take your time you have your first Benchy in about 90 minutes. Then you can't stop LOL.

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому

      You really cant stop. Next is the collecting of filament like its an addiction.

    • @MikeD0162
      @MikeD0162 2 місяці тому

      @@RadDadsPrintLab that's also started. Picked it up a week ago Wednesday and a it says I've already have 139 hours of printing time. Is this normal? Love your channel.

    • @gtiguy1992able
      @gtiguy1992able 29 днів тому

      On sale for 199 now for the combo mini

    • @Gallery90
      @Gallery90 29 днів тому

      @@gtiguy1992able I was thinking about upgrading my Prusa Mini's hot end and a new Bowden setup, but that was going to run me a little less than $150 with shipping. So, with the A1 Mini at $199 (+ shipping at about $20) -- Duh! Then I decided to get the A1 too.

  • @hetalsdesai
    @hetalsdesai 27 днів тому +2

    i bought one after watching your video.😊

  • @horbolhomestead4896
    @horbolhomestead4896 2 місяці тому +2

    Just placed my order… we will see how it goes. I’m pretty excited and hoping to build a side hustle with it.

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому

      Enjoy! Its a Super cool little printer.

    • @EnnTomi1
      @EnnTomi1 2 місяці тому +3

      got mine yesterday, it hasnt stopped printing ......

  • @Edramon53
    @Edramon53 Місяць тому +1

    I have a P1S with AMS at home, but at the moment I'm spending more of my time at my parents house than my own.
    Thinking of getting an A1 Mini just so I can at least get some stuff done while there. I've got a couple things I'm trying to design myself that I occasionally want to test print, and loads of little things like HSW & gridfinity accessories that I think it would be good for.
    Not having to go back home just to print something minor, or taking up all my time at home with the printer would be nice.

    • @RadDadsPrintLab
      @RadDadsPrintLab  Місяць тому

      The A1 Mini would be perfect for that. I keep the A1 Mini at my work so I can always prototype things

  • @Rolan18111
    @Rolan18111 24 дні тому +1

    I was going to get an old cr10, but I think you've convinced me to get this one :)

  • @dalerbsr.5061
    @dalerbsr.5061 22 дні тому +1

    I started in 2016 with a Mk2 Original by Prusa... Still use it, but now have a MK3S+. Ordered a MK4S on Black Friday (kit version) as with all the past ones, love assembling so i know how to work on them. I already am planning doing the CoreOne upgrade in 2025 when available. I do like the A1 Mini, at $199 how can i do wrong? Will be able to introduce my grand-kids to the maker world, I will transport this little guy to their home on extended weekend trips ... Thanks for your review, also Bambu should thank you for you got me to try their offering...

    • @RadDadsPrintLab
      @RadDadsPrintLab  22 дні тому

      Thanks! Im actually super interested in checking out some of the new Prusa Offerings.

  • @hotboyracing
    @hotboyracing 2 місяці тому +2

    I started with a ender 5 plus but want to get this as most the parts I’m printing I don’t need the hassle of the figuring everything out and it’d be faster to have a smaller printer to do them

  • @sniekerd
    @sniekerd Місяць тому +2

    That table rocking back and forth hurt my soal! ;) Thanks for the vid

  • @octaviasavage6404
    @octaviasavage6404 17 днів тому +1

    Looking to purchase for my daughter. Not sure if I should do the combo with AMS lite

    • @RadDadsPrintLab
      @RadDadsPrintLab  17 днів тому +1

      Its Such a hard decision. If you can afford it, I would get the AMS Lite. Theres a much larger chance that you will regret not getting it than getting it and regretting it. I hope that makes sense haha.

    • @octaviasavage6404
      @octaviasavage6404 17 днів тому

      @ Thank you! Makes sense and the route I decided to go. What budget/quality friendly filament do you recommend?

    • @MTBRadDad
      @MTBRadDad 16 днів тому

      @@octaviasavage6404I’m generallly using sunlu, overture, elegoo, and Bambu lab . The 8+ rolls deal from Bambu lab is actually pretty good when you use the refills

  • @ARG
    @ARG 17 днів тому

    So I got the A1 with AMS to replace my Neptune 3 pro and it's the best printer I have ever used and as I print a lot of stuff for youtube videos etc I decided to order the A1 mini as a second printer as 90% of the work I do will fit its smaller bed.
    For me in the UK the A1 mini is £150 so I ordered it 2 days ago and can't wait to get it.
    Great review by the way 👍

  • @djlightweight641
    @djlightweight641 16 днів тому +1

    I Started with ToyBox a year ago .. Some one gave me a Ender 3 pro a week ago .. i already wana get something newer cuz i hate leveling the bed every time ..

    • @RadDadsPrintLab
      @RadDadsPrintLab  16 днів тому

      I can totally understand that, for what its worth. Im actually working on the review of the bigger A1 at the moment. Its basically the same as the A1 mini, but just with a bigger build plate.

  • @flyinscotsmans
    @flyinscotsmans 2 місяці тому +1

    shakes the whole table . i started in janurary with the Voxelab X2 as my first printer and recently got he Creality 3 V3 SE

  • @Gallery90
    @Gallery90 29 днів тому +1

    Printers...Hmmm...
    History: Some crowdfunded coffee table thing (fail), AnyCubic i3 Mega, Robo 3D, Hatchbox Alpha Delta (incredibly well designed and constructed), MonoPrice Mini Delta (cute), AnyCubic Predator Delta (huge volume, fast, wore it out doing COVID mask frames), Creality CR10-Pro V2.
    Current: Prusa Mini (1st batch, had to upgrade extruder and heat break), Creality Ender 5 Pro (Micro Swiss direct drive).
    On order: Bambu A1 Mini (replacing Prusa Mini), Bambu A1 (replaces CR10-Pro V2 for mid-size jobs) -- did not order AMS. These two, with Black Friday pricing, cost less than a new Prusa Mini.

    • @RadDadsPrintLab
      @RadDadsPrintLab  27 днів тому

      You gave me a good chuckle about the Orangestorm Giga.

  • @deatheater810
    @deatheater810 10 днів тому

    can you print an object that doesn't leave a flat bottom or is that with all 3d printers

    • @RadDadsPrintLab
      @RadDadsPrintLab  7 днів тому

      Well, its a bit of a complicated answer. You could, but it most likely would require supports.

    • @deatheater810
      @deatheater810 7 днів тому

      @@RadDadsPrintLab how do you add supports

  • @devdawg22
    @devdawg22 14 днів тому +1

    Just got my 10 year old one for Christmas...I think i will be using it probably more than him lol he will probably print fidgets and toys so I'm not worried about the size

    • @RadDadsPrintLab
      @RadDadsPrintLab  14 днів тому

      They are gonna love it! My 9 year old is toying around on tinkercad already, These skills are going to set them up great as they get older

  • @jamis1232
    @jamis1232 Місяць тому +1

    Got a p1s might get one of these cuz it looks cute

  • @NeseComedy
    @NeseComedy 3 місяці тому +2

    I have a Ender 3 Max with 300x300x340mm build volume and finally want to get a printer that just works... Really thinking about getting the A1 Mini without AMS for $199, but I really can't decide if I will regret the 180mm³ print size in the near future.
    It looks funnily small when I hold a 180x180mm piece of paper on my current build plate, but on the other hand I have never printed anything larger on it because I just expected it to come off after hours or days of printing... But maybe I would like to print larger if I had a reliable printer? I don't know 😭
    Tbh I also could absolutely afford the X1C, but I just feel like there is something new around the corner, even if it's just the quickly swappable toolhead of the A1 on a new revision. I would hate myself after a $1500 investment if that happened, no matter how reliable it is in the current state.

    • @RadDadsPrintLab
      @RadDadsPrintLab  3 місяці тому +1

      I saw a really good suggestion from the next layer. Download Bambu studio and add the profile for the a1 mini. This way you can play with the slicer and see what things fit on that build volume 👍

  • @Krunkle78
    @Krunkle78 2 місяці тому +1

    My wife got me the P1S for my birthday to replace my Adventure 4, so of course I did a thing and just ordered the A1 mini to do smaller parts when the big brother is printing stuff lol oh and I now have 37 rolls of filament :P I did get the combo so If I decide to get the A1 for the bigger bed I have the lite I can toss on it, oh and I got the AMS combo on the P1S also, so glad I did! Just started following you and can't wait to see what you put out for vids!

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому +1

      Thanks and Yeah the P1S is on my Radar as one of the next printers I wanna get. Currently running the X1c, A1, A1 Mini haha

    • @Krunkle78
      @Krunkle78 2 місяці тому

      @@RadDadsPrintLab lol I just ordered the A1 today LOL my mini is supposed to be here today so I got a nice little printfarm going haha it's a sickness really :P

    • @Krunkle78
      @Krunkle78 2 місяці тому

      @@RadDadsPrintLab and I ordered the A1 just as the machine since I got the mini combo I have the ams that will work on that one, win win

    • @JaMVengenz
      @JaMVengenz 28 днів тому

      I got the A1 combo in October and I'm really tempted to get the mini to just print smaller stuff while the A1 handles the bigger longer projects 😬 Idk if I should, but the price is too good not to!

  • @bcampbell450
    @bcampbell450 15 днів тому

    Where did you get the articulating dinosaur

  • @SkylordAaron
    @SkylordAaron Місяць тому +2

    Overall good video but for when you’re filming with your phone, please just convert the audio to mono channel audio

    • @RadDadsPrintLab
      @RadDadsPrintLab  Місяць тому +1

      Whoops Must of missed that when editing.

    • @SkylordAaron
      @SkylordAaron Місяць тому

      @ happens :p. Just got my mini in the mail as a secondary printer and it’s pretty cool. Thanks for the vid

  • @Robothut
    @Robothut 3 місяці тому

    Adam, one question that maybe you can find the answer too for me. I do not have a smart phone, so cannot run any of the A1Mini apps or even scan QR codes. I run my A1 mini offline only. Now I have a laptop that I use for Bambu studio and load the files to a SD card for the printer. What I need to do is update the firm ware in the A1 mini. But as far as I can find online the A1 mini cannot have its firmware updated OFFLINE. Is there a way I can do this as my printer is still running version 1 firmware. I cannot even ask Bambu lab since I cannot run there apps or scan there QR codes. Love the printer speed and quality, just want to update the firmware.

    • @RadDadsPrintLab
      @RadDadsPrintLab  3 місяці тому +1

      Thats an excellent question, Have you reached out to Bambu Lab about it?

    • @Robothut
      @Robothut 3 місяці тому

      @@RadDadsPrintLab So far I have not found away to ask them, since I can not use any of there smart phone apps. They do not seem to have a standard email address for help. Do you know of a way to contact them for help that will work for non smart phone app people?

  • @kiwishamoo6494
    @kiwishamoo6494 3 місяці тому +1

    First printer: Mini Kossel Delta (from a kit) back in 2016 :-)

    • @RadDadsPrintLab
      @RadDadsPrintLab  3 місяці тому

      Those style printers are crazy looking. Hopefully one day I’ll be able to see one in person

  • @bored6839
    @bored6839 Місяць тому

    Will it work with pla pro /pla+

  • @20knighty
    @20knighty 3 місяці тому

    now Kobra 3 Combo is same prize with the mini with discount, you think is the best to get the Kobra?

    • @RadDadsPrintLab
      @RadDadsPrintLab  3 місяці тому +1

      I’d like to check that printer out, I haven’t seem to much about it so I can’t really give any useful information.

  • @bryanfoster362
    @bryanfoster362 3 місяці тому

    You can buy a $35 wifi extender and set it up with the ssid and pw from your work wifi to keep from having to switch back and forth ☺️

  • @YahyaYasser-z6l
    @YahyaYasser-z6l 2 місяці тому

    very nice video thanks!

  • @zigzagquill975
    @zigzagquill975 2 місяці тому +1

    LUDICROUS SPEED!

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому +2

      They should have one more after that’s called plaid

    • @zigzagquill975
      @zigzagquill975 2 місяці тому +1

      @@RadDadsPrintLabSpaceballs the 3d printer.

    • @MTBRadDad
      @MTBRadDad 2 місяці тому

      @@zigzagquill975😂😂

  • @benthk3dprt136
    @benthk3dprt136 2 місяці тому +1

    9:07 theese bamboo videos are getting ridiculouse , look at that table shake 😂😂

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому

      Haha, to be fair its a cheap table to begin with lol

  • @W_animations1
    @W_animations1 Місяць тому +2

    Gosh. Dang. Your so underrated

  • @Rippeee
    @Rippeee 3 місяці тому

    First printer was Ender 3 V2, but it is so heavily modified that it's closer to CR-10

    • @RadDadsPrintLab
      @RadDadsPrintLab  3 місяці тому

      I had a feeling I would see ender 3 on a lot of these comments haha. Are you still using it ?

    • @Rippeee
      @Rippeee 3 місяці тому +1

      @@RadDadsPrintLab yes and if i need a new feature i just add it, i think next upgrade is 2nd hot end for dual filament.

    • @RadDadsPrintLab
      @RadDadsPrintLab  3 місяці тому

      @@Rippeee Thats cool

  • @leemccready845
    @leemccready845 2 місяці тому

    all the prices that you mention are the discounted price not the regular full price.

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому

      Yeah, the price has been that way for quite some time now though. Seems like they are on a "Permanent Sale"

  • @quesadilla9646
    @quesadilla9646 Місяць тому

    Somebody know if buy the printer in Mexico pay some taxes?

    • @RadDadsPrintLab
      @RadDadsPrintLab  Місяць тому

      I would imagine you would have to pay some import fees. You can also look into a freight forwarder/

  • @AngelVazquez-wx7pj
    @AngelVazquez-wx7pj 2 місяці тому

    First printer ender 3 creality. But it broke

    • @RadDadsPrintLab
      @RadDadsPrintLab  2 місяці тому

      I expected to see this answer alot, well, the ender 3 part, not the breaking part.

  • @henrysiegertsz8204
    @henrysiegertsz8204 Місяць тому

    I feel as though you have had almost as much "sauce" as I have!