Hi Ryan. Just a heads up: I highly suggest to consider the ventilation situation of your office/printing space. Having 3 printers this close to you in the same space isn't optimal. Make sure you think about this, good l;uck with your business. Stay safe while you're having fun :-)
Thanks for the comment! I have been trying to figure out what I can do with this new space; you can't see it in the video but I actually have an air purifier at the base of the racks the printers are on and behind the camera I have a fan oscillating around the room to keep air flowing. That and keeping the window open have helped, but I definetley will need to either figure out better ventilation or put them in the basement, Lol
@@malonecustomdesigns to be honest, we moved into this house less than a week ago and you noticed that vent there before I did, Lol. But as of today, I haven’t noticed any issues 🤞
@@DesignsByBrodhead Great.....to be honest...I didn't notice one...I just assumed there would be one lol. That is one of the reasons that I am considering a second X1C over the A1.....but maybe that won't be an issue for me either!!
😂 love it. I was thinking about getting one of the enclosed models from Bambu but with the BF sale, I was able to get the second A1 combo and A1 mini for less than the P1S
I notice at 3:51 you take the build plate off and appear to clean it. What are you cleaning it with? Can you tell me the cleaning solution and even the brush you use? I have been having adhesions issues.. thanks!
So after about 4-5 consecutive prints, I will just clean the build plate off with hot water and some dawn dish soap. But in between prints, I like to use a little spray bottle of Isopropyl alcohol with a brush tool I found on printables. It allows me to fit a microfiber cloth to it so I can just rub it on the build plate to clean any debris or dust before the next print. I don't use a lot of isopropyl either, just a tiny spray from the bottle to spread on the plate. Hope this helps!
Same, I've been stressed by what to sell but I've taken last few months to design a few things and subscribe to a few patreons for a few commercial licensed models and am going to start there just to get sales and bring in shoppers for my personal designs. Best of luck to you!
Hey man, I'm from Brazil! I liked the content of your video! Congrats
Thanks for checking it out! Appreciate you!
Since watching your first vid i've completely changed my thinking on how to operate and what to sell. Very inspiring stuff grats on the success
Love that we can both learn from each other -- thanks homie!
Keep it up! Loving the videos!
Enjoying your video's. Good luck and keep up the good work. Looking forward to watching your journey.
Thank you!
Hi Ryan. Just a heads up: I highly suggest to consider the ventilation situation of your office/printing space. Having 3 printers this close to you in the same space isn't optimal. Make sure you think about this, good l;uck with your business. Stay safe while you're having fun :-)
Thanks for the comment! I have been trying to figure out what I can do with this new space; you can't see it in the video but I actually have an air purifier at the base of the racks the printers are on and behind the camera I have a fan oscillating around the room to keep air flowing. That and keeping the window open have helped, but I definetley will need to either figure out better ventilation or put them in the basement, Lol
Have you ran into any issues with the air vent in your room disrupting your non-enclosed printer?
@@malonecustomdesigns to be honest, we moved into this house less than a week ago and you noticed that vent there before I did, Lol. But as of today, I haven’t noticed any issues 🤞
@@DesignsByBrodhead Great.....to be honest...I didn't notice one...I just assumed there would be one lol. That is one of the reasons that I am considering a second X1C over the A1.....but maybe that won't be an issue for me either!!
😂 love it. I was thinking about getting one of the enclosed models from Bambu but with the BF sale, I was able to get the second A1 combo and A1 mini for less than the P1S
@@DesignsByBrodhead $489 right now for the combo.....hmmm I'm really considering trying it.
It is phenomenal, truly!
I notice at 3:51 you take the build plate off and appear to clean it. What are you cleaning it with? Can you tell me the cleaning solution and even the brush you use? I have been having adhesions issues.. thanks!
So after about 4-5 consecutive prints, I will just clean the build plate off with hot water and some dawn dish soap. But in between prints, I like to use a little spray bottle of Isopropyl alcohol with a brush tool I found on printables. It allows me to fit a microfiber cloth to it so I can just rub it on the build plate to clean any debris or dust before the next print. I don't use a lot of isopropyl either, just a tiny spray from the bottle to spread on the plate. Hope this helps!
@@DesignsByBrodhead Thank you and I am excited to follow your journey :)
Try WIndex spray.
Excelente mas emprendedores mostrando su dia a dia
How long did it take for you to get your first sale and wat do you sell?
I got my first sale within a few days of opening my shop, and they were for custom coasters for the drum & bugle corps I was in!
really like your videos, thanks for uploading! just one thing: it would be awesome if you can keep the camera steady 🙂
Thank you! I am trying to work on it, damn chair swivels so much and the gimbal I use has a locking feature on my face, Lol. Thank you!
next step is etsy for me....
Do it! :)
Same, I've been stressed by what to sell but I've taken last few months to design a few things and subscribe to a few patreons for a few commercial licensed models and am going to start there just to get sales and bring in shoppers for my personal designs. Best of luck to you!