LED Upgrade // White Reverse & Red Stop/Turn Signals on my GMC Sierra from GTR Ultra LED Bulbs
Вставка
- Опубліковано 8 лип 2024
- Goal: Increase the brightness of my reverse lights on the back of the truck for better visibility while backing-up and find suitable LED replacements for the stop/turn (red brake) lights on my OEM tail lights. I was reluctant to upgrade to LED lights for my tail lights as I didn't want something unreliable or problematic that would throw CANBUS errors or cause other issues with my new truck. But, I decided to try out several bulbs from GTR Lighting including:
Reverse - GTR Ultra Series 921 LED Reverse Bulbs
amzn.to/3NpNDvz
License Plate - GTR Low Profile T10/194 Carbide 2 LED Bulbs
amzn.to/47Mq0pj
Stop/Turn - GTR i-LED Ultra 7440/7443 Non-CK Red LED Bulbs
amzn.to/46ZlH91
- or -
www.headlightrevolution.com/b...
Stop/Turn - GTR i-LED Ultra Hyperflash Adapters
amzn.to/3No6EOY
The big question is, will these bulbs perform as expected? Will I get any errors on my truck, especially after extended run times on the bulbs? Well, that's precisely why I tested them for about 2 months prior to publishing this video. Watch the video till the end to find out my results!
00:00 Intro
02:34 Why LED?
03:29 Considerations
04:39 Hyperflash Problems
06:00 Solution
06:38 Install
11:47 End Results
Support the channel by browsing our online store, featuring most of the products featured and shown in today's video:
adventure.rocks/store/
#gmc #gmcsierra #ledlights @HeadlightRevolution - Авто та транспорт
For those interested in purchasing:
Reverse - GTR Ultra Series 921 LED Reverse Bulbs
amzn.to/3NpNDvz
License Plate - GTR Low Profile T10/194 Carbide 2 LED Bulbs
amzn.to/47Mq0pj
Stop/Turn - GTR i-LED Ultra 7440/7443 Non-CK Red LED Bulbs
amzn.to/46ZlH91
- or -
www.headlightrevolution.com/brightest-7443-turn-signal-bulbs
Stop/Turn - GTR i-LED Ultra Hyperflash Adapters
amzn.to/3No6EOY
Crazy how much these rigs cost, and we still have to supplement them with mods! Thank you for the vid 👊🏼
Very true!
Also frustrating when you ask the salesman about it and they look at you strange and say that everything is LED when in fact it isn’t.
Indeed @@decline1129
Nice install looks amazing compared to factory!
Very njce. I came here for the reverse lights. Just got a 2024 AT4 1500 in Thunderstorm Gray. I’m definitely upgrading the reverse lights. Those are awesome!!!
Thank you! Bet your AT4 looks sharp in that color.
I just sewn a fresh CLEAR set of Whelen SuperLed Vertex into harness. A bypass special winNok
No issues 6:29
Longtime fan here. Hey have someone follow you at night and brake - I think ONLY that red led is gonna annoy/blind drivers following you. I’ve seen a few aftermarket’s and they are outside allowed regulation too bright in my opinion. Otherwise ❤ the channel.
Great point. Definitely don't want to be too bright!
If you really want to improve the backup light system, for less than $25 you can get the Dual Function Wiring Harness for the late model Silverado/Sierra. It’s a 5 minute install, and enables the top of the cab cargo lights to become additional backup lights.
Thank you for the tip
have a link to this?
I have a 2024 Sierra 1500. I didn’t think the reverse lights are LEDs, but I’m unsure now, after getting the taillights off the truck with my T15s. The wiring harness has a small red clip that I undo, but I’m unsure how to detach it from the truck once I oust that clip. I still need to kill it apart or something and I have had no luck. Was yours similar at the reverse lights? I believe I undo that red clip and just pull? I don’t think I twist like in earlier model Sierras/Silverado’s. 🤷♂️ I just can’t detach the wiring harness from the actual light, and might just need to pull harder? I didn’t want to break anything. Any input would be so appreciated.
I believe if it is a twist/turn then it's incandescent. But, if it is a harness with clip/lock it is more likely LED. ...I believe that is the case, but there could be other variations certainly.
@AdventureRocks I love your new truck. How long did it take to get the truck delivered from order date to delivery date to dealer.
I am asking because I am considering ordering a 2500 with the gas engine. I have a GMC 3500 Duramax and want to add a gas 2500 to the “fleet”. My understanding is that you ordered yours and not chose from one on the lot. Thanks in advance!
It was about 2 months start to finish. It seems like the gas trucks are coming out pretty quick in general. I know someone else that ordered an AT4 gasser at same time, and it was also about 2 months start to finish.
Thank you btw, I am enjoying the truck!
Thanks! Good news.
Lasfit? We're they in your research?
Thinking this project is my next move also
Yes, for me LASFIT was a contender. I've had great experience and support with the vendor GTR/Headlight Revolution, so went with them this route. The brightness really is insane...game changer especially with reverse.
Any other lower cost option? The GTR set option is as 165 USD.
I hear you. I was reluctant to purchase given the higher price point, but I got to say they are completely worth it. I was concerned about going cheaper and then having the lights fail down the road. The GTR have given me zero problems so far.
I wonder will it give a code by running the LED I'm thinking about doing my license plate with LED,s.
Update: About 1500 mi and 2+ months since install...no error codes or hyper flash...no issues. I think the red stop/turn are the most susceptible to causing errors on cars...the resistor module fixes that...and this particular brand seems to be higher quality.
@AdventureRocks Yes and that is it I believe what quality they are those cheap knock off don't work for me.
@AdventureRocks Do you happen to know the number for the license plate light, mines is a 2022 GMC 3500.
@@bishopgeorge1333 Double check on yours, but good chance they are T10/194 bulb:
amzn.to/47Mq0pj
I put led license plate lights on mine it’s totally fine. It’s wierd GM doesn’t do that in the factory.
Strange, different flash, the delay
Old and new flash
Yes, difference between LED (left) and incandescent (right). Basically the incandescent has to "warm" up ea time, whereas LED is near instant on/off.
let me know if they burnout your main computer
I surely hope not!
@@AdventureRocks watched video on Car care nut .750 dollar mistake may worth a watch for you