I'm interested to know, as probably are many, as to what you are doing when firing up the torch. Specifically between 8:18 and 9:05, in what order do you operate the valves to fire up and then regulate the flame? Some instructions would be appreciated. This seems like a promising project, i particularly liked the bubbling mixer, very safe way of going about things. I'm tempted to make some variation of this design, so any extra information would be great 👍
The order I follow is propane on first, light the propane, then turn on the hho, then adjust the propane to balance the flame. I found turning on the propane first made it easier to get the system running without blowing out the flame, which can happen if you turn on the hho first, because it's a very delicate flame. The principle behind the bubbler is sound, but my execution of it was not ideal. I had issues with leakages and electrolyte volume, so I'm planning on doing a complete overhaul on the bubbler system. Honestly I'd say the whole system is pretty straightforward as long as you're careful and make sure you have fail safes in place so things don't go south. Good luck on your build! -Neally
I had the same chair!! Hurts your butt so bad. 😂 anyways; what state are you in? Love your shop; we have similar interests and tools. I also have about 8 80A smps at 24V. I’d like to send you one :)
Suprised you dont have more subs! you'll get there man Keep it up!
Thanks! I can't wait to get back to my projects in the spring when the shop warms up again
Very good and informative, you definitely deserve more subscribers
Thank you!
Nice success.
Thanks👍
Awesome ❤👍
Thank you! ❤️
I am confident in this channel!!🙂👍
Thank you my friend!
I love that you use freaking shaker cups xD
Yeah its pretty professional eh? ;)
@@Neally Very!! Hahaha
have a look at bubbler flashback arrestor vids , some use a spring loaded bearing to protect there bubblers and such !!
Ingenious Pt. II
🤟🤟
Sehr gutes Video u. gut erklärt
Danke! ❤
I'm interested to know, as probably are many, as to what you are doing when firing up the torch. Specifically between 8:18 and 9:05, in what order do you operate the valves to fire up and then regulate the flame? Some instructions would be appreciated.
This seems like a promising project, i particularly liked the bubbling mixer, very safe way of going about things. I'm tempted to make some variation of this design, so any extra information would be great 👍
The order I follow is propane on first, light the propane, then turn on the hho, then adjust the propane to balance the flame. I found turning on the propane first made it easier to get the system running without blowing out the flame, which can happen if you turn on the hho first, because it's a very delicate flame.
The principle behind the bubbler is sound, but my execution of it was not ideal. I had issues with leakages and electrolyte volume, so I'm planning on doing a complete overhaul on the bubbler system.
Honestly I'd say the whole system is pretty straightforward as long as you're careful and make sure you have fail safes in place so things don't go south. Good luck on your build!
-Neally
@@Neally Great explanation and advice, thank you. I will come back if I have any major success to let you know 🔥
Hey could you please tell me what model of stainless steel you used?
Or did you use one randomly? For example there are 316L, 304 and so..
It's 24 ga. 304 stainless!
Best is 316L
Com'è fatto il cannello cosa c'è all'interno?
I had the same chair!! Hurts your butt so bad. 😂 anyways; what state are you in? Love your shop; we have similar interests and tools. I also have about 8 80A smps at 24V. I’d like to send you one :)
I live in Canada! And holy smokes that's a serious power supply! Isn't that like nearly 2k watts??
Could u use map gas?
Yep, it burns hotter with mapp gas!
Put magnetic fields around it 30% more output
Whoa, I'll look into that!
Heck yeah new chair!
Edit: oh no
🥳❤️❤️
😉🤟
Almost cutting power a cheap way to weld
Yeah I think so too, definitely good enough for small stuff anyways!