Defender S Quick Take: Dual Motor POWER!
Вставка
- Опубліковано 31 лип 2024
- 2x 750w Motors. Finally got on the saddle of this Dual Motor, Dual Suspension, and Dual Battery electric bike. Check out the Eunorau Defender S page. By the way, I learned the bike is named after the land rover.
eunorau-ebike.com/collections...
Like our content? Here is the link to our online tip jar:
/ bluemonkeybicycles
bluemonkeybicycles.com
0:00 Intro
0:13 Background
1:01 Dual Frame & Dual Motor
1:43 Defender First Ride & Review
2:55 Dual Battery Instal
3:18 Bad News: Brakes
4:22 Summary
#eunorau #ebike #electricbike - Наука та технологія
All that's need to upgrade the brakes are 203mm disks, slightly better pads and the brake caliper adapters to raise them to the radius from the 180mm to the 203mm disks or 11.5mm. Total cost is under $100 for both wheels.
Great video. Hey what's the upgrade on the brakes.
Loved your review on FaT Hd. I was thinking between this and Fat Hd. Fat hd has less battery cost and maybe about the same tourge (given motors on the defenders are both 80NM). Fat hd easier to replace tires, hover chain suffers more.
i have a Thule 9002 trunk rack with a 72lbs capacity but the Defender is ~84lbs. do you think i'll be fine ?
How do the dual batteries work? Can you switch to using either one or both?
Whichever battery you have connected (1 ,2, 1+2), the bike will drain it evenly.
I just watched your yike bike story
Can you do the same on Faraday bikes ? I was always curious.
Oooh, that's a good one. I seem to recall they got bought out by a big bike company, and then shelved or something.
3:52
looks like it can brake any sec. ;-)
this is about as good as it gets before becoming an E-moto
Yeah, the line between the two is getting fuzzier.
Howdy 🤓
hi
Range test!
In real time, that would be a short video. I should totally do it, 'cause it sounds easy!
@@BlueMonkeyBicycles would love to see that video.
What is the controler, should be able to run 45A to get full peak power for both motors.
If gives only 30A you get 1500W what you can achieve with two 500W?? Peak 750W???
😥 քʀօʍօֆʍ
This is design is for 2 bat, should be tested with 2 bateries, with one bat at full peak power current 40+A on single bat, with 2 bat current 20+A what dramatically reduces voltage drops in cabling and internally so you get even bigger torque, speed, power on motors.
Voltage drop Ix R, power drop loss I x I xR. So half current 1/4 of lossess in power.