Hey man, I need some help. My situation is, before my terminator X install I got spark while cranking. After my install I do not get spark while cranking. The red with blue stripe wire that hooks onto the starter solenoid gets power when cranking, no spark, if I turn the ignition on, then power the same red with blue stripe wire with a power probe, Car starts. I can power it in the engine bay or under the dash at the brown with pink stripe on the ignition switch, still starts, same voltage when cranking with key or using the power probe. I do have a dual sync distributor that just plugs straight into the terminator X harness. On that grey connector behind the strut tower I found the wire bottom right of the gray connector that has key on power and cranking 12v. If I put that orange and green wire to my coil positive. Still no spark. I’m at a loss.
I would pull up the wiring for the hyperspark off holleys website and use the wire from the grey connector that has both and follow holleys wiring diagram for hyper spark distributor. Post the dizzy part number and I’ll look up the diagram as well
Sorry to hear about your daily, hope you're OK bud! Wiring is like my kryptonite lol great work Matt! Have a great day 👊
Hey man, I need some help. My situation is, before my terminator X install I got spark while cranking. After my install I do not get spark while cranking.
The red with blue stripe wire that hooks onto the starter solenoid gets power when cranking, no spark, if I turn the ignition on, then power the same red with blue stripe wire with a power probe, Car starts. I can power it in the engine bay or under the dash at the brown with pink stripe on the ignition switch, still starts, same voltage when cranking with key or using the power probe.
I do have a dual sync distributor that just plugs straight into the terminator X harness.
On that grey connector behind the strut tower I found the wire bottom right of the gray connector that has key on power and cranking 12v.
If I put that orange and green wire to my coil positive. Still no spark. I’m at a loss.
I would pull up the wiring for the hyperspark off holleys website and use the wire from the grey connector that has both and follow holleys wiring diagram for hyper spark distributor. Post the dizzy part number and I’ll look up the diagram as well
@@MattSkiDooFord I figured it. Msd box wasn’t getting power while cranking.
@@tech.2298 glad you got it figured out