Mini Chopper Build part 6
Вставка
- Опубліковано 22 січ 2025
- The final video on my custom mini chopper motorcycle build. This custom chopper / pit bike turned out awesome. Be sure to follow me on Facebook and Instagram, just search for thefabforums. Share this video on your facebook and get a free TheFabForums koozies. You can email me for details at thefabforums@gmail.com. You can also see this entire build and ask question on the forum www.thefabforums.com. See you there.
I like it, just finished mine, meshed an 80YZ Yamaha rear end into a west coast chopper bike frame, used the 80 YZ engine for power, has a little monarch springer front end and a throttle addiction 1 1/3 gal. sporty knock off miniature tank. I like the fact that you did your own fabrication, good job!
Nice & clean job, very cool for a mini Chopper
, congrats.
I like that many chopper looks real good 👍
Great build! Looks like a funny little thing to ride on =)
Thanks. I think will be nice to use when kicking around the drag strip or car shows. Have not really had a chance to ride it much yet though.
Soy amante de hacer inventos motorizados.saludos a todos los que les guste este oficio.
looks awesome dude well worth the wait.
Thanks...I appreciate the feedback
It's nice I think make so much good it's very nice mini chopper
Hey man I was wondering where did you get your frame and how did you do it I need to know and could you let me know I would love to feel one myself I just need to know where you got your friend
how is the bike holding up? i just made one but the drive chain snapped after the first 15 miles.
works great...doesnt get much use though
Salute👍👍👍
That's really awesome work.i watched step by step all videos.But all parts are to expensive in Turkey.But I WANT THIS :(
Kanıbuz Müzik I am sure you could find some stuff over there thats not too expensive. Do you have places that sell gocart parts?
TheFabForums.com Oh Gokart parts..i can found.is it work?
Kanıbuz Müzik Yea, most of what I used is gokart stuff
TheFabForums.com Thank you. I will buy a engine first.Than i can design my mini's body.
Kanıbuz Müzik Hi me again. :) Can i get like 200 or 150 cc electric engine?.Because go kart enginees are not legal on Turkey traffic.i think need electric motor :(
Wow -- this may well be the World's Coolest Mini-Chop! Certainly the most high-tech and perfectly detailed I've ever seen. (Bows in worshipful supplication:) Master!
Sweet...I appreciate the feedback. Send me your address to thefabforums@gmail.com and I will send you some koozies.
Didn't get this note until mid-July ... my email addy is Tyrssen@gmail.com. Thanks!
Send your mailing address to me at thefabforums@gmail.com
Hey I was wondering if your would wanna sell that bike ??
Monster bike
Wanna see more footage of you riding it!!!
lol...I will get some up soon. Thanks for the feedback
Just posted a thefabforums video blog that has some footage of people riding mini chopper
Mini chopper came out sweet!! What size pipe did you use? ID OD? Thanks for the info.
Thanks. Most of it was 1" OD but the back bone and and down tube were 1 1/2
DAMN, look how young some one looks....
This is an awesome build. I have been following your channel for a year now and had to go back and find this build when you highlighted earlier this week.
I have a mini bike that I have been rebuilding and I would love to copy your two speed setup. It is a super simple design. May I ask where you sourced your sprag sprocket from. Some call it a free spin sprocket. I can't seem to find one.
Thanks for your inspiration and dedication to video making.
+Dave Catlin sweet...i got everything from bmi karts but i dont think they have them anymore
You've been following for a year and you STILL asked the same freaking question he's been answering for over a year??? No wonder you can't come up with one on your own...
Yeah but where can you ride it.
I ride it everywhere....meant to be a pit bike at the track though
@@Thefabforums dont they make a street legal version
Bad ass man. Love it!
AGearHead4Life Thanks
Thanks for the info. I have a few more questions for you lol whats the rake on the front end? And did you use a pipe bender or a tube roller for the frame? Thanks for all your help.
Not sure on the rake, I can get it for you. As for the frame some was bent with a mandrel bender and the rest like the back bone and lower down tube was done by hand, heated with a torch and bent to my liking.
was this easy to build and how much is it to get you to make one
Anthony Bender it wasnt too bad, just alot of fabrication which is time consuming. I will sell you this one for 2k
+The Fab Forums if I had the money I would love to buy it or have one made
+The Fab Forums it looks worth bout 1500
Hello,im from Brazilian,im from Bauru!
awesome! welcome to the channel
Where did you buy this engine
what is the capacity for thic engine ..?? how many CC..???
I dont know....its a 5hp briggs
do you know where I can get. a back rim and tire for thar
+Nigel Joseph The one I used is just a mower turf tire with a 4 lug bolt pattern. You can find them at Tractor Supply, or anywhere that sells that type of place.
cute cool.
Thanks, I think
hello,
what type of metal was used for the tank?
just some 18 gauge mild steel
ok
that's bad ass..
thanks
oiii muito lindo esse trabalho
Kkkk
Keren om
how much you charge to build a 250cc mini chopper
I am not currently doing any customer work...sorry
Engine cost how much
few hundred dollars
How much money did you spend in total?
not really sure...I would say 5-6 hundred dollars at least
TheFabForums.com Oh nice.i talked some motorbike masters.They said min. 20.000 dollar for like your mini chopper. :D I want live to usa :p
Oh wow
sou brasileiro e queria saber qual tipo de motor foi usado e o preço dele
foi 80cc
5 hp
vlw
Foi nada!!
muito bom very good
+aranha spider thanks
tankyo
np
My new homemade electric bike
Why did u use so many chains coming off of the engine?
just to give it the look I was after
come on man show a short of ya riding that mini chopper around a little bit.
lol...I know I should have put some more chopper footage in the finish video. I may get something up.
Seriously man that was some really trick fabrication. Loved the chain drive primary,very clean.It was fun to watch but I still want to see peoples responses when your puttin around the pits!
Thanks I appreciate it. I hope people enjoy checking it out.
wait no shock absorbers good bye spine
smooth as butter
well I'm not an expert so I'll take your comment :) * thumbs up for your hard work *
Big rear tire help alot
Never heard of a hard tail???
nice build but the front end kind of lets it down
+blue skittle lets it down?
Blue does not like how you used bicycle parts. I guess he was expecting you to have Jesse James build the front end.
Now back to finishing that FOX right?
YES!...next stop, twin turbo fox body. I have been putting it off way too long. lol
siraaaaaa
Hi bro i'm from BALI good mini Chopper i like broo can you give me bro 😁😁
can i have one
o guidão deveria ser mais longo mais fico legal
legal
sure
+TheFabForums Hello,I'm learning English, if I'm wrong, please excuse me, when is the force or dc the engine?Where are you from?Im from Brazilian,and like much of inglish!!!Thank You!!
In Colorado, anything under 50 C.F. CAN BE RIDDEN ON SIDE STREET OR NO HIGHWAY ROADS WIRHPUT MOTORCYCLE ENDORSEMENT OR LISCENSE I'M BUILDING ONE NOW WIRH A 49CC BUT ADDED A BELT DRIVE INSTEAD OF CHAIN AND LEFT ENOUGH ROOM TO UPGRADE TO AT LEAST 125CC
Now put a turbo on it lol finish the fox
hey I thought about a turbo in the past...figured I better just finish it. The fox will have all my attention now until I finish it.
Mini Chopper
yup
é verdade deus abençoe
Any way of msging u personaly
thefabforums@gmail.com
I'm making de
Gol
Welds need some work sorry but I don't like them for being an amateur I can see blobs.
lol...blobs. no blobs on this bike
You sure talk a lot of crap for someone who doesn't have any videos of their work on their page.
There's nothing wrong with the welds. Did it for 25 years, would've noticed. And for the amateur you sound like, he didn't even show any of the welds close enough for you to see!
you must be in so much debt
Lol...why would you think that?
house cars etc...wouldn't be realistic unless you came into a lot of money or if they arnt your cars or house
Not true. Just dream big, work hard, and go get what ever you want in life.
You kids never seem to know how money works... Why debt? My kids tell me to just go to the atm cause it always gives me money. It's just that easy!
Hi Hi
hey
Hii
hey
las
J
was this easy to build and how much is it to get you to make one
was this easy to build and how much is it to get you to make one
was this easy to build and how much is it to get you to make one