Assembly and installation of forward and direct clutch drums, installation of intermediate clutch pack and band For parts and kits visit: transmissionben...
I appreciate the video series. This gave me some critical insight in rebuilding my 4R100. I was able to dive in with all the confidence of a 5 year old in a Batman t shirt.
I've been trying to align this direct clutch housing for hours. You can't rotate it more than a few degrees to align it with the teeth on the forward clutch. This is easily the most frustrating part of this entire build. He puts it in at 42:00 but there is a cut while he is aligning it. 😑
I appreciate the video series. This gave me some critical insight in rebuilding my 4R100. I was able to dive in with all the confidence of a 5 year old in a Batman t shirt.
I was successful.
This instructor is the best hes on. It tells you to the point exactly what you need to know thank you
Jimmy you are doing fantastic here, great detail, and i love the OCD showing through, (what a good auto mechanic should be). Thanks a bunch!
Thank you for all your videos. You have helped me a lot!
You are the best teacher
I support this content.
No thrust washer between direct and forward drum after 2000. No slots on the direct drum to hold it.
I wish I would have seen this 🤦♂️ i freaked out and bought one and then it didn't fit 🤦♂️🤦♂️🤦♂️ oh well lol
@@alexgriffin6785 I've been looking everywhere for mine for an hour lol
When installing clutch plates into trans make sure gaps in plates are at the 6 and 12 o'clock position
Why no new bushings as that is a quality complete rebuild no matter what
I've been trying to align this direct clutch housing for hours. You can't rotate it more than a few degrees to align it with the teeth on the forward clutch. This is easily the most frustrating part of this entire build. He puts it in at 42:00 but there is a cut while he is aligning it. 😑
SST-2805 - Clutch Drum Shell Assembly Remover / Installer Transmission Tool [E4OD]
I’m trying it now what a pain in the ass
isnt there a tool used on that sunshell to drop it in as assembly with forward drum?
C clamp works fine
Its not a c clamp son.
SST-2805 - Clutch Drum Shell Assembly Remover / Installer Transmission Tool [E4OD]
The book makes big note to that 6 and 12 o'clock
My Guess is they can't be installed incorrectly because the gapped section will prevent it from seating? So he doesn't mention it I guess
Oops. No thrust washer used between fwd and direct drum after "1998" per WITs parts but I think its after 2000 cause this is a 2000.
My foward clutch drum only has 3 steel and 3 friction only i have 95 e4od... but good endplay ...
Same here, all good.
Test Pressure for Air?? will to much pressure damage it? shop air 120 psi
I don't know if you already had an answer, but the hydraulic line pressure in an E4OD is about that to double that number.
#asmr
I like how borg warner does not engrave its parts with the slightest mark, no chinese are making their parts, no way !!!
He doesn't tell you that.
snooozzz fest
woke up