Steve, just going over a winter refresher course. Found I had missed just a little bit of info from last year. That M which I mentioned was shown because I had selected only a 35ft depth for the lake and not on auto depth. {pixel count concentration} Good to see you know that George Bishop also.
Steve, WOW!! Thanks for sending me to this zoom in zoom out video. I’m pretty sure I will be able to mark a waypoint AND return to it after watching your excellent explanations! So happy I have found your informational videos, I have watched many Humminbird videos but not any compare to yours!👍 Thanks again for sharing your expertise.
Thank you Roger, my teacher career definitely has an influence on striving for the educational component of these videos. The length of this video is connected to how much I use the zoom keys. Thank you for taking the time to share your thoughtful comments.
Wow Steve. Thanks so much for sharing. Im glad I found your channel. Very in depth like no other I have seen so far. I like many others bought an expensive unit and would rather have fun focusing on fishing than tinkering. Lol.
Steve, you aced another one. Fantastic explanation on all facets of the plus-minus buttons. Did you ever come across the letter M on the screen when you had lower depth range set. Thanks again for the time and effort in putting these very educational videos together.
@@stevechiassonfishing5876 That would be "M" for manual as in manual range selected. It is down in the lower right corner by the bottom range # selected.
Hit menu menu, , first make sure under set up tab your user mode is changed to custom then go to sonar tab, make sure depth lines are “on” as you scroll through sonar headings.
At 17.44 of this exposure you have a menu who includes I-Pilot controls.Why this item not appeared in my Helix-9 mega G2N.I. have also a helix 7 G2n connected and a I-pilot Link on my trolling motor Power Drive V2 buy in 2014
With your motor deployed, scroll through options to see if you can find spot to turn IPilot controls on. Make sure you are in custom mode, not angler mode. Unfortunately I do not have access to my unit right now to be more specific. Hit menu menu to get to your top bar options.
I set my ranges to focus in on zones I want to see. When I am ice fishing, I set my lower range slightly deeper than the actual depth. My upper range is adjusted to show amount of bottom I am interested in to enlarge image. If I wanted to see 80-100’ of water I set upper range to 80’, lower to about 105’. If I want to see entire water column I only change lower range similar to above.
I just bought the helix Mega 3 chirp with gps & side imaging, and an Ultrex trolling motor with DI, will the pain designation be the same on my unit? I won't get it in the water until spring now. Thanks in advance.
@@stevechiassonfishing5876 Thank you Steve, I made a mistake in my description, it is a helix 7 gen 3, so it definitely should work similarly. Your videos will definitely save a bunch of time once I can get on the water.
Hi Malcolm, it depends on what you hit. If you go under the nav tab and press waypoints, routes, and tracks to see if there’s waypoints in there. To delete all your waypoints you would have had to hit waypoints, routes, and tracks then pick “select all and” then delete to get rid of them. If you didn’t do that, they should still be there.
@@stevechiassonfishing5876 I don’t believe I hit delete all of them, I had 39 waypoints then they was gone, so I marked another waypoint after I lost the 39 and the new waypoint showed #40 so I did another one and it showed 41 it started at 40 not one like I thought it would?
@@malcolmzoll7613, did you go into the waypoints, routes, and tracks, as I mentioned earlier, to see if the waypoints are in there? They will show up there if they are still on unit. If it says “empty group” then they are definitely gone.
Steve, just going over a winter refresher course. Found I had missed just a little bit of info from last year. That M which I mentioned was shown because I had selected only a 35ft depth for the lake and not on auto depth. {pixel count concentration} Good to see you know that George Bishop also.
That’s awesome Brian, George is great, he’s super helpful!
Came for the helix setting, stayed for the powder coat jig painting…… smashed subscribe!
Thank you Cowboy Jack! I am glad you enjoyed the videos. I appreciate the subscription to the channel.
Steve you are a excellent teacher. You should consider having live simanars.
Thanks Eric, I am a retired teacher. I do some fishing seminars in my area but nothing live online. Something to think about though.
@@stevechiassonfishing5876 I told my friend that you remind me of a college professor. I was close
@@stevechiassonfishing5876 if you go live you will lock down UA-cam.
Thanks Eric, I truly appreciate your kind words 😊.
Thanks Steve, the info you have shared has significantly improved my sonar game 👍
That’s awesome Ed, that makes me happy that you have improved your sonar game. Thank you for taking the time to share your thoughtful comments.
Very detailed and accurate video. Good thing it's broken down into sectors. Congratulations
Great job I’m still learning watch all time!
Thank you Bill, your thoughtful words provided a great start to my morning!
Steve, WOW!! Thanks for sending me to this zoom in zoom out video. I’m pretty sure I will be able to mark a waypoint AND return to it after watching your excellent explanations!
So happy I have found your informational videos, I have watched many Humminbird videos but not any compare to yours!👍
Thanks again for sharing your expertise.
Awesome I worked on a video today for you both but not super happy with it. Sounds like you’re good to go, yes or no?
@@stevechiassonfishing5876 Steve, I will be giving this a try in the next week or two and will let you know how I make out. Thanks again 👍
Hi Vicki and Marv, I am planning on putting out the video you requested later today. I hope you enjoy it.
Excellent Steve. Thanks much for doing this and doing it so well.
You’re quite welcome, glad you enjoyed the video.
Another quality detailed video thanks teacher…. looks like I’m 42:09min late for work.
Thank you Roger, my teacher career definitely has an influence on striving for the educational component of these videos. The length of this video is connected to how much I use the zoom keys. Thank you for taking the time to share your thoughtful comments.
Wow Steve. Thanks so much for sharing. Im glad I found your channel. Very in depth like no other I have seen so far. I like many others bought an expensive unit and would rather have fun focusing on fishing than tinkering. Lol.
Thank you Prentis, it’s always great to hear that people are finding the channel helpful. I truly appreciate you taking the time to let me know!
Top shelf learning video, very informative. Great information. Thanks
Your kind thoughts are much appreciated Carl.
Thanks Steve very informative and helpful
Thanks for the kind words Robert.
Great video, very informative. I always learn from watching your video's. Thanks for the effort.
Thank you, I always appreciate your feedback and kind comments.
Thanks for the knowledge
You’re quite welcome Jonny, happy you found the video helpful.
Always the best💪
Thanks Adrian, I appreciate your comments and happy that you’re finding my videos helpful.
Best on utube!
Thanks Jason, your kind words made my day!
Steve, you aced another one. Fantastic explanation on all facets of the plus-minus buttons. Did you ever come across the letter M on the screen when you had lower depth range set. Thanks again for the time and effort in putting these very educational videos together.
Thanks again for the kind words Brian. I don’t recall seeing a M. I would be curious to see a picture of that M you’re referring to in a screenshot.
@@stevechiassonfishing5876 That would be "M" for manual as in manual range selected. It is down in the lower right corner by the bottom range # selected.
George Bishop, thank you for the clarification on the M. As usual, you can always count on you for coming up with the answer. 👍
The situation is when I not in simulation mode .I. am directly on the lake fishing in my last comment
New Sub here trying to learn more about my Helix 15 .How do you get all the depth lines and depth numbers?
Hit menu menu, , first make sure under set up tab your user mode is changed to custom then go to sonar tab, make sure depth lines are “on” as you scroll through sonar headings.
At 17.44 of this exposure you have a menu who includes I-Pilot controls.Why this item not appeared in my Helix-9 mega G2N.I. have also a helix 7 G2n connected and a I-pilot Link on my trolling motor Power Drive V2 buy in 2014
Is your motor deployed?
@@stevechiassonfishing5876 Yes the motor deployed
With your motor deployed, scroll through options to see if you can find spot to turn IPilot controls on. Make sure you are in custom mode, not angler mode. Unfortunately I do not have access to my unit right now to be more specific. Hit menu menu to get to your top bar options.
@@stevechiassonfishing5876 We are in winter in Quebec now .In may I will try this.Thank You
Please do something on depth settings when I set lower range just say to 40 ft in 100 ft of water my viewing area on screen is very small thanks
I set my ranges to focus in on zones I want to see. When I am ice fishing, I set my lower range slightly deeper than the actual depth. My upper range is adjusted to show amount of bottom I am interested in to enlarge image. If I wanted to see 80-100’ of water I set upper range to 80’, lower to about 105’. If I want to see entire water column I only change lower range similar to above.
I just bought the helix Mega 3 chirp with gps & side imaging, and an Ultrex trolling motor with DI, will the pain designation be the same on my unit? I won't get it in the water until spring now. Thanks in advance.
Yes Duane, the pane designation will work the same on your unit.
@@stevechiassonfishing5876 Thank you Steve, I made a mistake in my description, it is a helix 7 gen 3, so it definitely should work similarly. Your videos will definitely save a bunch of time once I can get on the water.
Thanks for the kind words Duane, they are very much appreciated.
Steve I got a question about way points, I hit something on my Helix 7 and lost my waypoints and can’t find them any help would be really appreciated
Hi Malcolm, it depends on what you hit. If you go under the nav tab and press waypoints, routes, and tracks to see if there’s waypoints in there. To delete all your waypoints you would have had to hit waypoints, routes, and tracks then pick “select all and” then delete to get rid of them. If you didn’t do that, they should still be there.
@@stevechiassonfishing5876 I don’t believe I hit delete all of them, I had 39 waypoints then they was gone, so I marked another waypoint after I lost the 39 and the new waypoint showed #40 so I did another one and it showed 41 it started at 40 not one like I thought it would?
You could always try restoring defaults and that will bring you back to factory settings.
@@stevechiassonfishing5876 I tried that reset to default didn’t help , well thanks for your help anyway, I guess I lost them .
@@malcolmzoll7613, did you go into the waypoints, routes, and tracks, as I mentioned earlier, to see if the waypoints are in there? They will show up there if they are still on unit. If it says “empty group” then they are definitely gone.