Hello thank you for the upload . Ive just bought the pedal based on your vid. Right now im looking at the diagram for the footswitch. 1. does the footswitch just use a single stereo male jack ? 2. Which kind of on/off switch are you using - not the one who goes "click" Thanks :-)
Great demo. For what it's worth, I compared all of these compact/micro loopers that are around this size and price point... this one beats the other seven by a mile on features... just not sure on warranty issues. All info avail on the loopermusic website..
100roberthenry I've made the footswitch, but only the button that changes the memories works, the other one when i press, appears on the screen the letters PC, and don't work. do you know what can i do?
Great review of this pedal,and so smooth playing too,i just got myself one,and noticed someone asked for diagram of switch pedal,have you the schematics for you ab pedal ,would be great to have a copy if possible,,cheers ,Andy
Thanks for this cool video! I'm guessing the the switches for the extra pedal are unlatched/momentary? Do you have any idea how much current the Nux uses? I would like to power this with the power brick on my pedal board. Nux manual only says 9V....
Hello my friend ... I have a question ... you use a connector into aux. only for the ability to trigger the "self" without being connected to nothing at the other end or indeed the other side of the cable is connected with something? .. Thank you. JF
Hi. Would I be able to use a single button wired to the right and ground of a jack input only to control the preset switching? Which side of the jack caters to the preset up/down? Thanks
Hi, the best way to find which controls which would be to insert a stereo male jack into the looper, then short either the tip or the ring to the ground. Hope that helps
Awesome jamming there mate - well done. Nice wiring diagram too :) haha I have one of these pedals and I love it - but my playing is nowhere near as good as yours! What is your amp and guitar?
This is the most informative loop core demo. Is it possible to store a loop into a slot without pressing save (using foot pedals only). For example, if you record a loop, then switch up or down to a different slot - does it save the recorded loop in the slot you have switched from. Or to use more than one loop you have to save them in the slots before performing?
It sounds great. Do you think I can use this pedal and my Tc Helicon Vocal harmonizer pedal at the same time. Can I link both of them up and then run through my Pa?
Hi, could you tell me what is "NC" or "DMM" in this diagram? Does the footswitch work just to short the cirquit? I do understand basic electronics and know how to solder, but this diagram is little unclear for me
NC = not connected, DMM = digital multi meter... meaning if you have a multi meter set on 'continuity'= beeps when touching both cables, so apply this when testing the switches. however, if you just wire up the stereo jack and test each switch by trial and error you'll get it ok...it works fine. good luck
100roberthenry Thanks, I'll try this. I'm asking, because I was trying before to make a footswitch for line6 ux2. This uses mono jack for footswitch and I thought it'll work just when I connect these two wires, but it doesn't do anything. I hope here will be better.
Hello there, great video! I have a question regarding foothswich - is it necessary to use some "special" foothswitch or it is possible to use any foothswitch? have a marshall foothswich, so I was wondering whether it would be functional? Thanks!
Great demo Is the durm sound in all tracks from loop core ? I have one and the drum sound not so good like yours Second point I have no pedals , all effects in line 6 amp can I connect looper through aux after recoeding to use amp effects with play back
hi yes the drums are all from looper...and are pretty lame... yes effects must be before the looper..otherwise it gets nasty... i have a little roland cube, and have to do that with it.... but i also have a multifx which i used in this video, and was fine....
Awesome demo man, this looks almost like the ideal looper if you're on a budget. I have one question tho, can I load backing tracks I download or create on it and jam to them? Thanks for the awesome demo again
Very sweet playing here and deft button pushing to boot. I love the idea of loopers and can see the sense and desirability of them but the reality makes me cross and frustrated...hahahaha
cheers paul, loopers are great fun, and a cool writing tool, its handy for running through my breadboard whilst testing circuits too...saves having to strum/tweak/strum/tweak etc etc...nice bit of kit. cheers man, rob.
Hi, are these your compositions? I'd just like to say (being a guitar player myself) you seem to have that `magic touch'. I'm looking around for a looper with a bit of a rhythm function on it. This is a really good demo, I'm not just thinking Boss any more.
cheers man, just random jamming for demo purposes...i looked at the boss/digitechs they are cool...but this one does all i need, but to make it really useful you need to build the ''optional'' control footswitch box. have fun.
im trird to save .wav files on it but they dont play??? Instructions don't really explain how to recall the imported waves and play as backing tracks. Please help if you can.thank you
It looks really nice! =) I'm just getting into live looping and still looking for the "tools" that work for me. I just made a couple of videos... ;) I have a question though. Is it possible to choose which "loops" you want to mute? Like let's say i record 4 loops, and i want to mute loop 2 and 4 but keep playing loops 1 and 3. Thanks! =)
with the ''optional'' footswitch you can choose which loop number you want....to have a mute ''loop'' you would probably be best off copying your initial loop to another number, then deleteing the audio from it so that you till have the same tempo as the initial loop...........or you could just stop it of course and be manual.....makes more sense iguess
100roberthenry so one would need to buy another foot switch. But it's nice to know it's possible. I am currently using Ableton Live and controlling it with a Home Made FootPedal, but it would be great to find a way to do it without using the computer... ;)
***** yeah you really need the ''optional'' footswitch for this to be useful live....look in the description i have put a link to the optional pedal to build yourself....i built mine and its a must have with this. happy looping man,.
Does this come with power supply? Also, how many cables would I have to buy for it? I have a boss me-50 processor pedal running to my amp,and my guitar running to the pedal
Hi, no it doesnt come with psu. Its the usual tip negative 9v so easy to find ebay etc...all you will need is one jump lead .....guitar to me50....me50 to nux in....nux out to amp.
Hi buddy, Nice video. I just bought one and I'm wondering if there is a count in function? If not how did you get it to start recording when you started strumming without having a gap at the start. I also just realised the record light is flashing before you start strumming. How did you make it do that? Much appreciated!
Yes you can use the drums as a count in with auto record, you can either start the drums then start playing,recording, or you can havd it so the drums woll start as soon as yku play....have fun.
Hi i using nux looper every time i record a track and stop, the looper run the last 4 counts has a gab before my guitar loop start again. is there i need to do some adjustment so that i can have the looper runing spotenously without have a 1 bar count gab.
+pracash sam you most likely need to build or buy the optional controller footswitches...heres my second vid with the diy footswitch...it is silent when clearing, rather than playing then clearing,....ua-cam.com/video/44XH9ni_LTc/v-deo.html
may I ask a question sir? what power supply adaptor are you using to power up that pedal? Are you using generic ones or did you buy a specific nux power supply adaptor? and also how much mili amphere is that adaptor? thank you for answering sir
ohh I see uhm Im planning to buy a nux loop core and I have a power supply adaptor that is 9volts with 300 milliamperes, will my adaptor work properly for the nux loop core? I was kinda reluctant to use my adaptor,Im afraid it might burn the circuit of the pedal
Hi.Yeah,cool demo man.I just got one and they are great,and a lot of fun.Only thing is,it seems to play 2 seconds or so of the loop you are trying to clear when in stop mode.im wanting to use it live,is there a way round this.Thanks.
hi justin, had a tinker about, yes it can be done, but only when using the 'optional footswitch' then it can stop instantly with 1 stomp, or clear if held down...and doesn't play that 2 second bit...cool....i have just rewired my diy footswitch but now i have i have lost tap tempo control....hmmmm...i'll tinker some more...but yeah the 2 sec playback is cured..
Hi!! I hope you can help me, I cannot import wav files into the pedal!! I´ve tried many ways!! I can´t find a converter mp3-wav file that helps me. Can you import wav files into your pedal? When I conect mine to the computer the files are there but they don´t play when I´m using the pedal alone. Great demo by the way! Best regards!
Hi!!!!! I´ve just saw your other video!!!! I´ve finnaly made it!!! Thank you very much!!! The proble was that the portuguese manual is wrong!!! Thy told me to rename the file after I import it to the pedal, the secret as you told is to rename the file before you send it to the pedal. Once again thank you very much!!!!
Got another question for you my friend: Have you found a way to record two tracks on the fly say recording and rhythm verse on 1 and then maybe a rhythm chorus on 2? Hope you can help!
Thanks buddy. Yes that what I thought. I might invest in a better looper that might be able to do this someday. Was thinking of buying a digitech but we'll see.
of course..it can save 99 loops, total record time is 6 hours...plenty. :) or you can save 6 x 1 hour loops ...lol.. it has usb so you can load it with waves/backng tracks too...very handy.
hi , if you get 2 dpdt (6 pin) switches, it will work. one is wired to be NO (normally open) and the other is wired to be NC(normally closed) . your only hooking up 2 wires on each. get the switches, then hook them up with croc clip leads, to test. when happy solder it up...you need a stereo TRS to steroe TRS cable ( stereo socket. ) on my other video there should be a link to the diagram. hope this helps.
you could use 2 x 3pdt (9pin) switches, and only use the one column of lugs, like i say hook it up temporarily with croc leads to test. if it doesnt work on one switch swap the middle and top/bottom lugs...
I need your help. How can i import audio from the computer? I cant seem to play the wav files that i have imported from the pc. help much appreciated! great video!
hi, your waves have to be 16bit 44khz or it wont work. rename your wave to w031 and put that in the w031 folder. do same for w001 etc etc...hope this helps ,
can someone make a video on how to import tracks to the nu-x looper pedal. ive tried the pdf directions but nothing plays back after downloading wav files to the cherub folder, Thanks.
are they 44khz 16bit waves?...do you have 99 folders?... i noticed in the manual they use a small w on the actual renamed wav file...whether this makes a difference im not so sure,
ok. just tried it to make sure....get your 44khz 16bit wave called blahblah.wav and rename it say patch 61. rename that wav w061.wav THEN put it in the EMPTY w061 folder....it works, hope this helps. btw the pedal must be powered, and have usb on. just in case : ) rob.
+ Terry Laprince ... Hello my friend ... I also like to know what you asked why I did as it was written in the manual and did not work ..... Tell me .. after the response we got here you consegiu? .... The JF Brazil
According to their website www.boss.info/us/products/rc-3/, the Boss has 3 hours. But in this case, the record time is secondary. because most of the songs we listen to can not be longer than 10 minutes. Anyway, the NUX's price is almost a half of the Boss's. Now I know which loop pedal I should go for.
I listened to 'echoes' by Pink Floyd, it's about 23 minutes. That's the longest song I've ever listened to. Anyway, one more question, is NUX LOOP CORE a true bypass pedal?
To format it. Hold footswitch down whilst powering on. Then press up button for 2 seconds until "fo" displays. Then press footswitch again. This will reset it to factory settings. And wipe all your loops...
one prob. i just purchased a nux loop core and i can't connect it to my PC, my computer simply doesn't see it. do you think i need a soft or something for this? the manual doesn't say anything. would be grateful for a replay, thanks!
+Lera Kelemen have you seen my nux wav video?....you still have to power the pedal while the usb is in...and have an output lead plugged in or the pedal will not turn on....try that ,
hi, yes....use the stereo aux in straight from your multifx....check out my vid on the ''optional'' controller footswitch...very handy....essential in my opinion
Thanks for that, appreciated. But the wiring diagram is just foreign to me. Am I supposed to rewire the pedal or is there another pedal I should also buy?
Samantha Cattlin hi, yes you can, it has a standard guitar in jack, and also has a aux stereo input too, i would run both through a small mixer (with an XLR) socket though, to get really good balance of levels. hope this helps.
The looper core deluxe is 24 bit... while boss has remained 16 bit except for their flag ship model at least to the best of my knowledge to date... and that adds up to a huge difference in sound quality..😁
+100roberthenry , He's just saying that he liked your demo and he's downloading it to Mp3, Quote: "Delicious, I'm gonna download it to Mp3, It's very relaxing." By the way... Already bought this pedal, it's on the way from China to Mexico, but I still have some questions: Which are the rhythms included on the pedal? Are all 4/4? or another rhythms structures are included? Is the quality of this rhythms good? Regards!
I normally use a 1960s strat but recently started using an older cheapo squier and for some odd reason it just feels better. Anyways, awesome playing friend.
Tony Godwin . Cheers man. Yeah i have a gibson les paul. Ibanez. And a jackson. But somehow i just love this old cheapo...you just know what feels right regardless of labels....
you have to rename the wav file to the name of the folder you put it in... e.g guitar .wav put it in w001 folder , and rename guitar.wav to w001.wav....now it will be in number 1 loop.
Ray Luis D. Monserrata , hi man, dropbox has moved my files from public to private, i will try and get it sorted for you today ok, i,ll let you know when i do...
The lead-work reminds me so much of Nels Cline’s playing on Sky Blue Sky and Kicking Television. Love it.
Not going to lie, but this is easily one of the best demos of this pedal actually. Well done and great playing.
Cheers matey.....
Hello thank you for the upload . Ive just bought the pedal based on your vid.
Right now im looking at the diagram for the footswitch.
1. does the footswitch just use a single stereo male jack ?
2. Which kind of on/off switch are you using - not the one who goes "click"
Thanks :-)
Great demo. For what it's worth, I compared all of these compact/micro loopers that are around this size and price point... this one beats the other seven by a mile on features... just not sure on warranty issues. All info avail on the loopermusic website..
Awesome!!!!!!!! How did you do the harmony in 3:39? Is it just the loop pedal or not? It sounds so beauty! You play so well, congrats!! :D
cheers man, its just playing harmonies over the looping notes...
100roberthenry Which push button is in footswitch? Normally closed or normally open? Thanks.
the are normally closed : NC.
100roberthenry I've made the footswitch, but only the button that changes the memories works, the other one when i press, appears on the screen the letters PC, and don't work. do you know what can i do?
Hugo Carlos try the connections on either side of the other switch...
tengo el loopstations RC3,,Pero me gusto el loopcore de Nux,tiene el doble de tiempo,y tiene otras funciones muy buenas
thanks....i think...:)
@@100roberthenry he's basically saying : loopcore nux better than RC3
sorry for being 3 years late 😂
Fantastic demo, I've ordered mine today, thanks so much for posting 👍🎸🎼👍
cool, checkout the 'optional' diy footswitch video too.....
Great review of this pedal,and so smooth playing too,i just got myself one,and noticed someone asked for diagram of switch pedal,have you the schematics for you ab pedal ,would be great to have a copy if possible,,cheers ,Andy
link is in the description :)
Great simple instruction and nice playing!
Ok.thanks for the reply. I'm going to try the 6 pin switch
Always with me, always with you.
are you?...:)
Would have been nice to show the full view of the looper in your video. Great demo though. Good job, sir!
Thanks for this cool video!
I'm guessing the the switches for the extra pedal are unlatched/momentary?
Do you have any idea how much current the Nux uses? I would like to power this with the power brick on my pedal board. Nux manual only says 9V....
Hello my friend ... I have a question ... you use a connector into aux. only for the ability to trigger the "self" without being connected to nothing at the other end or indeed the other side of the cable is connected with something? .. Thank you. JF
Hi! Would this work with a other commercially-available footswitches? I dont know how to create one. :) Thanks in advance!
boss fs6 probably...
The Fast one i liked is it an original ? 4:12
thankyou for the demo.. yes the offial nux video didn't help a newby like myself at all. and lovely playing
Hi. Would I be able to use a single button wired to the right and ground of a jack input only to control the preset switching? Which side of the jack caters to the preset up/down? Thanks
Hi, the best way to find which controls which would be to insert a stereo male jack into the looper, then short either the tip or the ring to the ground. Hope that helps
@@100roberthenry Good idea. Cheers!
Awesome jamming there mate - well done. Nice wiring diagram too :) haha I have one of these pedals and I love it - but my playing is nowhere near as good as yours!
What is your amp and guitar?
This is the most informative loop core demo. Is it possible to store a loop into a slot without pressing save (using foot pedals only). For example, if you record a loop, then switch up or down to a different slot - does it save the recorded loop in the slot you have switched from. Or to use more than one loop you have to save them in the slots before performing?
Hi, nope...you will have to save it first...cheers...
Thanks for the quick response
: -)
It sounds great. Do you think I can use this pedal and my Tc Helicon Vocal harmonizer pedal at the same time. Can I link both of them up and then run through my Pa?
+Ryan Hourihane (HURRICANE) yep...no problem.
Oh Awesome. Thank you very much for the quick response
Hi, could you tell me what is "NC" or "DMM" in this diagram?
Does the footswitch work just to short the cirquit?
I do understand basic electronics and know how to solder, but this diagram is little unclear for me
NC = not connected, DMM = digital multi meter... meaning if you have a multi meter set on 'continuity'= beeps when touching both cables, so apply this when testing the switches.
however, if you just wire up the stereo jack and test each switch by trial and error you'll get it ok...it works fine. good luck
100roberthenry Thanks, I'll try this. I'm asking, because I was trying before to make a footswitch for line6 ux2. This uses mono jack for footswitch and I thought it'll work just when I connect these two wires, but it doesn't do anything. I hope here will be better.
Hi your switches are NC but is the switching (pedal down) momentary or latching ?
Hi, mine are latching on the video, however you should use momentary...
Superb playing, and nice clear demonstration,
had mine a few weeks but it NEEDS a switch pedal, do you have a diagram for your diy switch?
hi, thanks... yes i do. i' will pm you ok.
great! thanks a lot!
100roberthenry please pm me too i need a switch pedal
Hello there, great video! I have a question regarding foothswich - is it necessary to use some "special" foothswitch or it is possible to use any foothswitch? have a marshall foothswich, so I was wondering whether it would be functional? Thanks!
Hi, thanks, you need 2 DPDT footswitches connected to a stereo jack, and a stereo to stereo jack lead....
if you checkouut my other loop video there is a diagram in the description..
sorry, , the diagram in this videos description...link at bottom.
thanks man! :)
Great demo
Is the durm sound in all tracks from loop core ?
I have one and the drum sound not so good like yours
Second point
I have no pedals , all effects in line 6 amp
can I connect looper through aux after recoeding to use amp effects with play back
hi yes the drums are all from looper...and are pretty lame...
yes effects must be before the looper..otherwise it gets nasty...
i have a little roland cube, and have to do that with it....
but i also have a multifx which i used in this video, and was fine....
Awesome demo man, this looks almost like the ideal looper if you're on a budget.
I have one question tho, can I load backing tracks I download or create on it and jam to them?
Thanks for the awesome demo again
SirPlaysWithTaste hi, yes you can load it up with 99 backing tracks....see my other vid on how to load up wav files to it...cheers
just beautiful, can you plug a microphone and loop vocals?
yes, i would use a small mixer, so you can have guitar and XLR microphone too...cheers
Thanks for upload, can you activate the drums with a separate control button?
You can when using the optional control foot switch which I have built , see my other video,
ua-cam.com/video/44XH9ni_LTc/v-deo.html
helpful video and great playing - thanks!
Very sweet playing here and deft button pushing to boot.
I love the idea of loopers and can see the sense and desirability of them but the reality makes me cross and frustrated...hahahaha
cheers paul, loopers are great fun, and a cool writing tool, its handy for running through my breadboard whilst testing circuits too...saves having to strum/tweak/strum/tweak etc etc...nice bit of kit. cheers man, rob.
Hi, are these your compositions? I'd just like to say (being a guitar player myself) you seem to have that `magic touch'. I'm looking around for a looper with a bit of a rhythm function on it. This is a really good demo, I'm not just thinking Boss any more.
cheers man, just random jamming for demo purposes...i looked at the boss/digitechs they are cool...but this one does all i need, but to make it really useful you need to build the ''optional'' control footswitch box. have fun.
Hi, nice demo thanks. Could you tell me if this quantises loops please
no it doesn't...you have to play properly lol... ;)
100roberthenry
hmm, properly! Ok I'll practice some more ☺ Thanks
pompom906 :)
Hi, is the Boss FS-6 or FS-5L compatible in the Ctrl In?,
It should be as it has switches for normally closed,open optoons..,
im trird to save .wav files on it but they dont play??? Instructions don't really explain how to recall the imported waves and play as backing tracks. Please help if you can.thank you
+Antonio Murani hi, download the manual, lwww.nuxefx.com/Manual/Loop%20core%20Manual%20EN%20V4.pdfook at 4:1 , you have to rename your wav file.
i have the pdf manual and saved the file in w001.wav 16bit file format ...but still no luck..Thank you for trying.
+muranilife hi, keep at it ,i know it works as i have successfully done it myself...
It looks really nice! =)
I'm just getting into live looping and still looking for the "tools" that work for me. I just made a couple of videos... ;)
I have a question though. Is it possible to choose which "loops" you want to mute? Like let's say i record 4 loops, and i want to mute loop 2 and 4 but keep playing loops 1 and 3.
Thanks!
=)
with the ''optional'' footswitch you can choose which loop number you want....to have a mute ''loop'' you would probably be best off copying your initial loop to another number, then deleteing the audio from it so that you till have the same tempo as the initial loop...........or you could just stop it of course and be manual.....makes more sense iguess
100roberthenry so one would need to buy another foot switch. But it's nice to know it's possible.
I am currently using Ableton Live and controlling it with a Home Made FootPedal, but it would be great to find a way to do it without using the computer... ;)
***** yeah you really need the ''optional'' footswitch for this to be useful live....look in the description i have put a link to the optional pedal to build yourself....i built mine and its a must have with this. happy looping man,.
thanks! =)
If I first record out of tempo, does it adjusts itself, or do I have to redo?
I say it becouse of live issues that might happen.
if you record out of tempo you will have to redo yes....as far as i know there is no quantize that can account for bad timing etc...
Does this come with power supply? Also, how many cables would I have to buy for it? I have a boss me-50 processor pedal running to my amp,and my guitar running to the pedal
Hi, no it doesnt come with psu. Its the usual tip negative 9v so easy to find ebay etc...all you will need is one jump lead .....guitar to me50....me50 to nux in....nux out to amp.
London uk...8 30am ...sipping coffee with my cat lol...
I hope you're an Arsenal fan!!!hahaha
davey g nope, i hate football...:) seems pointless...one day you win....one day you lose.....
Such is life!!
Hi buddy, Nice video. I just bought one and I'm wondering if there is a count in function? If not how did you get it to start recording when you started strumming without having a gap at the start. I also just realised the record light is flashing before you start strumming. How did you make it do that? Much appreciated!
Yes you can use the drums as a count in with auto record, you can either start the drums then start playing,recording, or you can havd it so the drums woll start as soon as yku play....have fun.
Hi i using nux looper every time i record a track and stop, the looper run the last 4 counts has a gab before my guitar loop start again. is there i need to do some adjustment so that i can have the looper runing spotenously without have a 1 bar count gab.
+pracash sam you most likely need to build or buy the optional controller footswitches...heres my second vid with the diy footswitch...it is silent when clearing, rather than playing then clearing,....ua-cam.com/video/44XH9ni_LTc/v-deo.html
wow!! you diy a foot switch, can u show how to creat one foot switch.
+pracash sam look in the description , there i a diagram to download....have fun. rob
Hi, great video, can you choose not to use to drum recording or do you have to?
The drums are on a seperate volume control...so yes you can loop without them.
100roberthenry
cool, cheers
may I ask a question sir? what power supply adaptor are you using to power up that pedal? Are you using generic ones or did you buy a specific nux power supply adaptor? and also how much mili amphere is that adaptor? thank you for answering sir
+blackship14 hi no i didnt buy a nux psu, i just use my 2400 milliamp 10 way daisy chain effects psu....plenty of power for all 10 pedals.
ohh I see uhm Im planning to buy a nux loop core and I have a power supply adaptor that is 9volts with 300 milliamperes, will my adaptor work properly for the nux loop core? I was kinda reluctant to use my adaptor,Im afraid it might burn the circuit of the pedal
+blackship14 as long as it it TIP NEGATIVE and DC NOT AC you'll be ok.
+blackship14 9VOLTS....
do you mean DC output?
what does the aux in do?
Brando Baloloy . Hi . It is a stereo in...for mp3. Or for stereo pedal setups....you can use both.
Hi! Excelente vid!! one question: can you play two (or more) loops recorded at same time?
Emi Martinez: No.
Is there any way to set an exact tempo, like say 120 bpm or is tap tempo the only option?
William Pierce tap only ...
Hi.Yeah,cool demo man.I just got one and they are great,and a lot of fun.Only thing is,it seems to play 2 seconds or so of the loop you are trying to clear when in stop mode.im wanting to use it live,is there a way round this.Thanks.
hmmmmm yeah i know what u mean....not sure on that. i'll have a mes around n see ok....
Cheers buddy.
hi justin, had a tinker about, yes it can be done, but only when using the 'optional footswitch' then it can stop instantly with 1 stomp, or clear if held down...and doesn't play that 2 second bit...cool....i have just rewired my diy footswitch but now i have i have lost tap tempo control....hmmmm...i'll tinker some more...but yeah the 2 sec playback is cured..
That's brill mate.cheers for that.
no worries, works great now....just need to get tap tempo sorted... : /
Hi!! I hope you can help me, I cannot import wav files into the pedal!! I´ve tried many ways!! I can´t find a converter mp3-wav file that helps me. Can you import wav files into your pedal? When I conect mine to the computer the files are there but they don´t play when I´m using the pedal alone. Great demo by the way!
Best regards!
Hi!!!!! I´ve just saw your other video!!!! I´ve finnaly made it!!! Thank you very much!!! The proble was that the portuguese manual is wrong!!! Thy told me to rename the file after I import it to the pedal, the secret as you told is to rename the file before you send it to the pedal. Once again thank you very much!!!!
+Pablo Loureiro cool, glad you got it working in the end, those translated manuals can be a nightmare..... :)
Nice playing kind sir thanks for the demo👍🏻😃
You are amazing Mr. Boston....
Jay Bulotti thanks...i think lol..
hey deadastronautfx what kind of switch will i use?i tried using stompbox switch but it won't work
hi use 2 x dpdt footswitches....one is wired NO the other is wired NC......
Hey, Rob, you use one of these with your rockin' cab sim/DI/headphone amp?
Hi. Yes i have. Put the nux at the end of the effects chain...then into the sim. Works great. Cheers man.
Got another question for you my friend: Have you found a way to record two tracks on the fly say recording and rhythm verse on 1 and then maybe a rhythm chorus on 2? Hope you can help!
Con Petropoulos , hi no, you could only do that on the fly by making a longer backing....
Thanks buddy. Yes that what I thought. I might invest in a better looper that might be able to do this someday. Was thinking of buying a digitech but we'll see.
Can it save some loops after turning it off , and what duration of those recordings.thanks
of course..it can save 99 loops, total record time is 6 hours...plenty. :)
or you can save 6 x 1 hour loops ...lol.. it has usb so you can load it with waves/backng tracks too...very handy.
Thanks man.
hey... the question is can we connect it to a headphone by a headphone jack?
it would be mono....but you could use both outputs to a splitter for stereo...yes
I use a 9 pin dpdt switch but not working.is it a On-On kind of switch that I will use?
hi , if you get 2 dpdt (6 pin) switches, it will work.
one is wired to be NO (normally open) and the other is wired to be NC(normally closed) . your only hooking up 2 wires on each. get the switches, then hook them up with croc clip leads, to test. when happy solder it up...you need a stereo TRS to steroe TRS cable ( stereo socket. ) on my other video there should be a link to the diagram. hope this helps.
www.dropbox.com/s/7syfqnxa7l6znf4/nuxcontroller.jpg?dl=0
you could use 2 x 3pdt (9pin) switches, and only use the one column of lugs, like i say hook it up temporarily with croc leads to test. if it doesnt work on one switch swap the middle and top/bottom lugs...
I need your help. How can i import audio from the computer? I cant seem to play the wav files that i have imported from the pc. help much appreciated! great video!
hi, your waves have to be 16bit 44khz or it wont work. rename your wave to w031 and put that in the w031 folder. do same for w001 etc etc...hope this helps ,
I did the exact thing. Hmmm. It doesn't play. I rerecorded it using the guitar input. sigh. thanks for the reply!
+LaidbackjuaN hmmm....it should work... ive done it loads of times...replace the w031 with your renamed wav...
+LaidbackjuaN here you go, i made a video tutorial.... ua-cam.com/video/AJBflvZ9WnU/v-deo.html
+100roberthenry does it work now?.... make sure you use a number '0' not an o... :)
can someone make a video on how to import tracks to the nu-x looper pedal. ive tried the pdf directions but nothing plays back after downloading wav files to the cherub folder, Thanks.
are they 44khz 16bit waves?...do you have 99 folders?... i noticed in the manual they use a small w on the actual renamed wav file...whether this makes a difference im not so sure,
ok. just tried it to make sure....get your 44khz 16bit wave called blahblah.wav and rename it say patch 61. rename that wav w061.wav THEN put it in the EMPTY w061 folder....it works, hope this helps. btw the pedal must be powered, and have usb on. just in case : ) rob.
its pretty nifty loading it up with backing tracks etc...and you can overdub/undo too as usual...handy...have fun..
+ Terry Laprince ... Hello my friend ... I also like to know what you asked why I did as it was written in the manual and did not work ..... Tell me .. after the response we got here you consegiu? .... The JF Brazil
+Jose Francisco hi, when you have happy wav.we all move to moscow...and eat chips.and stuff..
The price aside, just functions. From your opinion, which one is better? Boss RC 3 or NUX LOOP CORE? Thank you so much.
hmmm...well the nux has 6 hours record time....not sure what the boss has...the nux is a good reliable tool . does everything i need it to.
According to their website www.boss.info/us/products/rc-3/, the Boss has 3 hours. But in this case, the record time is secondary. because most of the songs we listen to can not be longer than 10 minutes. Anyway, the NUX's price is almost a half of the Boss's. Now I know which loop pedal I should go for.
i have metal albums where there are 25 minute tracks lol.... cool. have fun.
I listened to 'echoes' by Pink Floyd, it's about 23 minutes. That's the longest song I've ever listened to. Anyway, one more question, is NUX LOOP CORE a true bypass pedal?
no, they cant be, same as the boss....they are buffered bypass.
I can't get drum beat to work display on SE
Hi. Sounds like you might need to format it....
To format it. Hold footswitch down whilst powering on. Then press up button for 2 seconds until "fo" displays. Then press footswitch again. This will reset it to factory settings. And wipe all your loops...
hey man. do you know if any old duel footswitch will have the same sequence for this pedal as yours does?
BlodgiDonka . hi most likely not....they need to be dpdt momentary...and have a stereo out. with a stereo cable...
DEADASTRONAUTFX thanks. sorry, I missed the link. where can I get the stuff to make this?
BlodgiDonka . ebay. 2x momentary dpdt footswitches. 1x trs 1/4" inch jack socket. and a trs to trs stereo 1/4" inch cable...done.
BlodgiDonka . and obviously an enclosure...i used a 1590b .
BlodgiDonka , hi yes the pedal you linked to should work ok.......
Would it work the same with a acoustic guitar ?
yes...as long as it is an electro-acoustic....
one prob. i just purchased a nux loop core and i can't connect it to my PC, my computer simply doesn't see it. do you think i need a soft or something for this? the manual doesn't say anything. would be grateful for a replay, thanks!
+Lera Kelemen have you seen my nux wav video?....you still have to power the pedal while the usb is in...and have an output lead plugged in or the pedal will not turn on....try that ,
+Lera Kelemen ua-cam.com/video/AJBflvZ9WnU/v-deo.html
+DEADASTRONAUTFX yup, had that from the start. the looper shows UC in red but nothing on the PC.
+Lera Kelemen not even when you click my computer and see drives?..
+DEADASTRONAUTFX not even. it doesn't see any external device
Loop core display Swiss SE what's this mean
Great playing. Using a Korg A4 multi fx processor would I be able to overdub different FX sounds from it as I play over my loop?
hi, yes....use the stereo aux in straight from your multifx....check out my vid on the ''optional'' controller footswitch...very handy....essential in my opinion
the footswitch diagram is in the description....
Thanks for that, appreciated. But the wiring diagram is just foreign to me. Am I supposed to rewire the pedal or is there another pedal I should also buy?
Ok just saw the other vid but what's the deal with footswich, can I actually buy it from somewhere?
hi, yes you can use a boss fs6 footswitch
hey can i loop vocals and guitar at the same time thanks mate be great for a response
Samantha Cattlin hi, yes you can, it has a standard guitar in jack, and also has a aux stereo input too, i would run both through a small mixer (with an XLR) socket though, to get really good balance of levels. hope this helps.
The looper core deluxe is 24 bit... while boss has remained 16 bit except for their flag ship model at least to the best of my knowledge to date... and that adds up to a huge difference in sound quality..😁
why do i need footswitch ? can u explain ? .. seriously :)
Peter Ferenc checkout vid #2 and you will see why... :) better control all round..
ua-cam.com/video/44XH9ni_LTc/v-deo.html
Delicioso, me lo bajo en mp3, esta muy relajante.
+Jhuan Fdo sorry i dont understand..... english only. :)
+100roberthenry , He's just saying that he liked your demo and he's downloading it to Mp3, Quote: "Delicious, I'm gonna download it to Mp3, It's very relaxing."
By the way... Already bought this pedal, it's on the way from China to Mexico, but I still have some questions:
Which are the rhythms included on the pedal?
Are all 4/4? or another rhythms structures are included?
Is the quality of this rhythms good?
Regards!
+saulmedardo ha ha i did wonder... yes you can have 4/4 . and 3/4 timing, the rythmscare quite naff...but gives you a solid timing....
Tanks a lot, can´t wait for my loop core to come.
What guitar is that? I'm digging those pickups.
Tony Godwin . Hi its an old cheap encore strat i got for 30 quid...ive since swapped those pups for humbuckers but single sized...
I normally use a 1960s strat but recently started using an older cheapo squier and for some odd reason it just feels better. Anyways, awesome playing friend.
Tony Godwin . Cheers man. Yeah i have a gibson les paul. Ibanez. And a jackson. But somehow i just love this old cheapo...you just know what feels right regardless of labels....
ANYBODY knows how to import files.. I've been working on it but it doesn't recognize the .WAV file
Not sure, havent tried it yet...ill give it a go later...
you have to rename the wav file to the name of the folder you put it in... e.g guitar .wav put it in w001 folder , and rename guitar.wav to w001.wav....now it will be in number 1 loop.
definitely works 100% , just tried it..... )
100roberthenry The issue was in the .wav file, it has some specifications that recognizes the Loop Core
100roberthenry Thanks!
thanks Rob I will try that
yeah man it works, shame they have to be labelled that way instead of proper names, but it works a treat, good luck
Display SE what does it mean
No idea, just looked at manual....no SE in it...
Will do it(drinkin wiskey). Thanks rob
ha ha...yeah get it down ya man...i overdid it last night : /
nice demo :D
Amazing playing
😊 all my favourite guitarists are left-handed
How to make bass guitar ,without bass guitar?
pitch shifter... :) its a cheat but it works.
I have the old version but they came out later with this one with octave function: www.nuxefx.com/show-49-28-1.html
one of my wishlist.
Ray Luis D. Monserrata , may your wish come true my friend...
Thanks a lot DEADASTRONAUTFX. I really like the nux loop core. Can't wait for it.
DEADASTRONAUTFX I finally have my NUX Loop Core. But I can't open the link to your footswitch. I want to make the DIY footswitch.
Ray Luis D. Monserrata , hi man, dropbox has moved my files from public to private, i will try and get it sorted for you today ok, i,ll let you know when i do...
hi man, let me know if the new link is working for you ok, cheers...
nice strat chu
Hate how before clearing the loop, its sounds for 2 seconds. Ruins it for live performance.
build the footswitch...
ua-cam.com/video/44XH9ni_LTc/v-deo.html
nice I think im getting one,selling my Rc30 as we speak,its great,but just gigantic,and the drums are weak in it! nice gtr playing!
cheers man, yeah i had a rc30, too limited....a full 6 hours on this cool tool..
i would defo build or buy the "optional" 2 footsitch to have full control...
I have a boss FS6 PEDAL,will it work on this ?
+Guy Man (evelskunny71) yeah sure...
+Hippie 80 no, the looper just records whatever you put in it....i used a korg ax1500g multifx...
2022 ?
yes it is... :)
Nice leads
thanks...
ua-cam.com/video/AJBflvZ9WnU/v-deo.html