NymoLabs 4th Axis Rotary Module
Вставка
- Опубліковано 5 жов 2024
- In this video I'm trying out the 4th Axis Rotary Module from NymoLabs. Thanks for watching. If you have any questions please leave a comment below.
I am very happy to announce that in cooperation with NymoLabs I now have a discount code link available. You can use this link to go to the NymoLabs website and get a whopping 10% discount on your total order.
www.nymolabs.c...
Also, there may be a new CNC related livestream coming in the near future. Stay tuned.
Link to DesignSpark Mechanical Playlist - • DesignSpark Mechanical...
Get your Jenny Bits here - www.cadencemfg...
Using these links to shop at Amazon.com help to support my channel.
Thank you.
Qfun Digital Caliper - amzn.to/3UDMQtR
1/4" shank 60° V-bit - amzn.to/3WOb4o9
3/8" Flush Trim Bit - amzn.to/3K3mInn
Titebond II Premium Wood Glue - amzn.to/3WWj5aw
Deft Spray Lacquer - amzn.to/3yFmGzA
The Official NymoLabs website: www.nymolabs.com
Join the NymoLabs CNC Users Group - / 691328529087335
#NymoLabs #NBX5040 #rotaryaxis
Dave's Social Media Links
Facebook: / djgatton
Twitter: @DaveGatton
Instagram: davegatton
Join this channel to get access to perks:
/ @davegatton
Looks Good Dave! Keep up the great work! Can’t wait to see the final chess set on your IG! 😉
Hi Dave!!! Good instructions!
Thanks for watching Robin! I appreciate your support. 😃
Hey neymo labs! It says something about your product when a guy uses it instead of another 10k machine he also has! Keep at it Dave!
Very cool Dave... A nice addition to the CNC
@troypritchard2999 Thanks Troy.
Dave, nice demonstration. That is a really neat accessory. Thanks for showing it.
@@paulsmessyworkshop Thanks for watching Paul.
That was a nice accessory for this CNC. The chess pieces looked good. Thanks Dave.
Thanks Larry. These NymoLabs products are showing me more and more that they are the real deal.
Great video as usual Dave.
Hey buddy! Thanks for checking out the video. I appreciate your support. 🇺🇲
Great video again Dave
@johnthompson5388 Thanks John. I appreciate your support.
Very cool 👍 How long did that chess piece take to route out of the dowel? Glad you used the knight, it's the nightmare piece to make 😢
Thanks for watching. The knight took a little less than an hour and a half. The roughing pass was 32 minutes, and the finishing pass was 53 minutes.
Dave, I have the same setup as you. (VCarve and the 6040)
I can jog the 4th axis but when I cut the rotary doesn’t spin and the XY move as if it is 2D. Does the generic gcode post processor handle the 4th axis or is there another processor I need to use?
Thanks for watching! You will need to use the G-Code WrapY2A (mm)(*.tap) post processor in VCarve.
@@DaveGatton I cannot get this right. I followed your video as best I could. I used the WrapY2A pp. Everytime I run it, it cuts straight down to what looks like the center of the dowel and then cuts from there. I created a roughing toolpath with a 1/4 inch end mill. I can't understand why it doesn't respect the .1 depth of cut.
@@BoydWold where do you have your z zero set? To the centerline of the A axis? Or to the top of the material?