Where did you get your NGK plugs? I know a couple years ago I seen a video showing fake ngk plugs sold on Amazon or ebay. The video showed how to tell the difference. The insulator broke apart or?
One was from hl supply I believe, the other, not sure. Even a used one didn’t run well! I actually thought the advance and the port job messed it up. Champion to the reduce!( never thought I would EVER say that)
I really take forever to build stuff….I am actually dabbling with a 352 now. When I get it done, may be awhile, I will see how it runs. Planing to go a bit more aggressive with the timing and I wouldn’t want to experiment on anyone’s saw. If it’s a runner….I follow up with you! Like I said….may be awhile. Have to get a garage insulated, wired and closed in first!
Well keep doing what your doing I'm honestly looking at getting the 361p. My 352 rips pretty good with a property tuned carb and 30:1klotz oil opens up the scream factor. I have a poullan I aggreively ported I have to get a carb for it it screams then shits the bed. Like I said keep doing what your doing impressive work I'm a Lil spoiled I have a full blown machine shop so when I mess with my saws it's quick work
What the heck? That is incredible man! My 18v Ridgid battery saw is almost more powerful than my 310 is. Insane! Love that top cover opening as well. Looks awesome! New Sub!
Thank you sir. Lot of smoke and mirrors…it’s leaned out a lot for chain speed. I wouldn’t want to run it all the time like that. It does shine a bit more when it’s used as intended as a 4-5 inch limbing saw. Overall, definitely better than stock!!
well, if mine ran a bit better, I would probably use it a bit more. It is kinda the low stump trail clearing saw so it may be a bit overkill. I like filing the small semi chisel chains when it gets in the dirt. Again, job well done.@@crazyfeller5704
just saw this message. As your channel grows, you will find it is a job finding replies and comments because they get buried! I sure did get a kick out of that saw for sure. I am sucker for loud things! @@crazyfeller5704
I understand, but from my experience tuning clone saws, as soon as one was leaned out a bit too much, they fell on their face and couldn't really cut. Yours was still throwing chips! hahaha!@@crazyfeller5704
Dig into it… not too awful bad, and I really didn’t drastically change anything except the muffler. At least it seemed “worth it”. I was thinking I f’ed it up with the ignition break up. First time I have ever had an issue like that with plugs.
Where did you get your NGK plugs? I know a couple years ago I seen a video showing fake ngk plugs sold on Amazon or ebay. The video showed how to tell the difference.
The insulator broke apart or?
One was from hl supply I believe, the other, not sure. Even a used one didn’t run well! I actually thought the advance and the port job messed it up. Champion to the reduce!( never thought I would EVER say that)
That things gnarly nice work.
Appreciated…better than stock!
Can I send you my 352
I really take forever to build stuff….I am actually dabbling with a 352 now. When I get it done, may be awhile, I will see how it runs. Planing to go a bit more aggressive with the timing and I wouldn’t want to experiment on anyone’s saw.
If it’s a runner….I follow up with you! Like I said….may be awhile. Have to get a garage insulated, wired and closed in first!
Well keep doing what your doing I'm honestly looking at getting the 361p. My 352 rips pretty good with a property tuned carb and 30:1klotz oil opens up the scream factor. I have a poullan I aggreively ported I have to get a carb for it it screams then shits the bed. Like I said keep doing what your doing impressive work I'm a Lil spoiled I have a full blown machine shop so when I mess with my saws it's quick work
What the heck? That is incredible man! My 18v Ridgid battery saw is almost more powerful than my 310 is. Insane! Love that top cover opening as well. Looks awesome! New Sub!
Thank you sir. Lot of smoke and mirrors…it’s leaned out a lot for chain speed. I wouldn’t want to run it all the time like that.
It does shine a bit more when it’s used as intended as a 4-5 inch limbing saw. Overall, definitely better than stock!!
well, if mine ran a bit better, I would probably use it a bit more. It is kinda the low stump trail clearing saw so it may be a bit overkill. I like filing the small semi chisel chains when it gets in the dirt. Again, job well done.@@crazyfeller5704
I saw you running Frampton- you really got a kick out of it. Do you have any other modded saws?
just saw this message. As your channel grows, you will find it is a job finding replies and comments because they get buried! I sure did get a kick out of that saw for sure. I am sucker for loud things! @@crazyfeller5704
I understand, but from my experience tuning clone saws, as soon as one was leaned out a bit too much, they fell on their face and couldn't really cut. Yours was still throwing chips! hahaha!@@crazyfeller5704
Nice Chainsaw..greetings from Germany Peter
Thanks Peter!
Gute Arbeit....
Very nice I have one here too in jamaica 🇯🇲🇯🇲🇯🇲🇯🇲
They are a great little saw! Thanks for stopping 👍👍
U r most welcome
Little Ripper👍🏻
It’s better than stock…. that isn’t saying much….they are sooo bad!
It was sounding good. It's a small engine with no stroke. It wouldn't have the grunt. But the motor sounded clean.
It certainly isn’t a torque monster!!!
That's running really great, would run laps around mine, but now I really want to take mine apart
Dig into it… not too awful bad, and I really didn’t drastically change anything except the muffler. At least it seemed “worth it”. I was thinking I f’ed it up with the ignition break up. First time I have ever had an issue like that with plugs.
@@crazyfeller5704 it's just heresay but have heard people saying bad things about ngk plugs in two strokes
Heard similar.. but never had an issue till now. That brand was my go-to…definitely not champion!! Lol
@@crazyfeller5704 I actually like the cheap Chinese spark plugs.. Which alot of people seem to hate
I ran them in a few clones…not really any issues either.
You said you run the 351 carb?
Echo cs-352 carb. That was just convenient, it’s not any bigger than a 310 carb.
👍👍👍