This is something alot of companys should do this instead of spraying on this driveways this so cool. if had a company like this it would cut my time in half getting the job done better
Billy Goat sucks. The housings break and the impellers are plastic. Toss a 9hp Honda on an old Bannerman or get yourself a Scag Little Wonder. The only reason the Little Wonder crack cleaner they showed in the vid are good is because it has the dual belt that does not toss belts twice a week.
@@jerrysmith9780 I hope your talking Little Wonder edger and not a blower. Blower will do nothing. The Dollar Store sells elongated wire brushes on a stick that will work better than a blower or a lance. The heat lance only looks impressive. The best thing is a gas powered walk behind edger. I recommend the Little Wonder edger @4:55 as the commercial edgers have the dual belt that also work wonders for edging grass. Single belt models blow a belt once every few hours. Dual belt last years before belt replacement. Not only for crack cleaning, but using the wire brush for edging eviscerates the grass so you dont have a long string of sod to put in a wheel barrow to hide under a bush somewhere. Just blow it off into the lawn and your golden. I buy the 8 inch twisted wire wheels and to be sure they come with the little plastics washers to adjust for your arbor diameter. Dont crank the nut on too tight either as the direction of the wheel naturally tightens the nut. If the nut ever did happen to come lose, the wire wheel will just stop spinning. Just saying as that if you have a wheel on a long time they can be a beech to get off as you need a pipe wrench on the dual v belt and one on the nut itself. If your gentle tightening the nut you can hold onto the wire brush with your glove and a wrench on the nut. Ten times faster than the pipe wrench way. If you ever get into a really deep edging job where the grass is overgrown 3 or more inches, I cut up an old lawn mower blade as they are 1/4 inch thick, dont dig into the asphalt/cement etc and last way longer. Dont fret about not being balanced as after 10 minutes of use, it will be balanced. I dont even worry about the arbor size matching. Just use the large washer and as before, if the nut comes even slightly loose, the blade stops working.
Looks like a good machine , I would have to try it, but I like my MS machine , its simple straight to the point fast and gets the job done fast the only bad thing is they stopped making them , but they are a good machine.
asys Nirvana some people do put seal coat on road,but is not necessary,I worked for a asphalt company in the northwest and we used both method buggy squeegee machine and after it dryout,a spry coat and then stripping
This type of seal coating works - squeegee is imperative for quality seal coating. The companies that just spray and walk away are taking your $. Brush and squeegee are a must. Good video.
This is how they do it ok.and ii am showing you.the ob.they ste doing ok.god bless you.my.big brothers ok.we llove you my dear friend ok.all.over the whole world ok.my desr .
For god sakes, can you get any newer equipment. The stuff looks un touched. From the scrubber to the sealer. Even the brooms and the dudes gloves are all brand new. Show what this equipment looks like after a few weeks and be real.
Lol, your sealer is garbage - Its constantly watered down from distributors. There is always trash in it, but you'll probably never mention flushing dirty sealer out of old tanks which have not been properly cleaned prior the winter before, so whatever. No one ever, is going to fill cracks in a parking lot out of a 1 gallon tube, so why advertise that? Machines are "ok" at best, but some don't come as advertised either. Shocker right? Thanks for sharing, glad I got to comment the truth.
@@rearspeaker6364 coal tar in general is always cut. My point is they don't watch what their distributors do to it, and they completely trash their product
My left ear enjoyed this
With one speaker on my phone, my time has come. 😂
HA! Paid more for the music than the voice audio. Mono for the win!
Yep
Hahahahahha bro
i don't know why i just watched the whole video when it has no relevance to me whatsoever. but I enjoyed all of it, great video.
This is something alot of companys should do this instead of spraying on this driveways this so cool. if had a company like this it would cut my time in half getting the job done better
All your equipment and guys are so clean . You guys must be the nearest asphalt folks ever .
Just for the video
That "Billy Goat" blower is amazing. Great video 📹.
I have seen your video they are awesome 👍
Billy Goat sucks. The housings break and the impellers are plastic. Toss a 9hp Honda on an old Bannerman or get yourself a Scag Little Wonder. The only reason the Little Wonder crack cleaner they showed in the vid are good is because it has the dual belt that does not toss belts twice a week.
@@tocarules I'm debating between a heat lance or the Little wonder for cleaning cracks prior to hot melting with my RY10 Pro. Is the lancer better?
@@jerrysmith9780 I hope your talking Little Wonder edger and not a blower. Blower will do nothing. The Dollar Store sells elongated wire brushes on a stick that will work better than a blower or a lance.
The heat lance only looks impressive. The best thing is a gas powered walk behind edger. I recommend the Little Wonder edger @4:55 as the commercial edgers have the dual belt that also work wonders for edging grass. Single belt models blow a belt once every few hours. Dual belt last years before belt replacement.
Not only for crack cleaning, but using the wire brush for edging eviscerates the grass so you dont have a long string of sod to put in a wheel barrow to hide under a bush somewhere. Just blow it off into the lawn and your golden.
I buy the 8 inch twisted wire wheels and to be sure they come with the little plastics washers to adjust for your arbor diameter.
Dont crank the nut on too tight either as the direction of the wheel naturally tightens the nut. If the nut ever did happen to come lose, the wire wheel will just stop spinning.
Just saying as that if you have a wheel on a long time they can be a beech to get off as you need a pipe wrench on the dual v belt and one on the nut itself.
If your gentle tightening the nut you can hold onto the wire brush with your glove and a wrench on the nut. Ten times faster than the pipe wrench way.
If you ever get into a really deep edging job where the grass is overgrown 3 or more inches, I cut up an old lawn mower blade as they are 1/4 inch thick, dont dig into the asphalt/cement etc and last way longer. Dont fret about not being balanced as after 10 minutes of use, it will be balanced. I dont even worry about the arbor size matching. Just use the large washer and as before, if the nut comes even slightly loose, the blade stops working.
I love the black road it look very beautiful color and it very neat as well good job ok
Looks like a good machine , I would have to try it, but I like my MS machine , its simple straight to the point fast and gets the job done fast the only bad thing is they stopped making them , but they are a good machine.
This is a great explanation! Thanks for the video.
Awesome video!
Get better soon and be a great time to get a new phone and have no problems getting back to you with any
Good movie, I like it, I learned a lot
This is very beautiful and it look very well done ok god bless you very much ok .
do we put seal coat in asphalt road too
asys Nirvana some people do put seal coat on road,but is not necessary,I worked for a asphalt company in the northwest and we used both method buggy squeegee machine and after it dryout,a spry coat and then stripping
@josue Elizondo same view ,thanks a lot ... it helped
Why did the walrus go to the tupperware party? So he could find a tight seal.
what does a walrus need tupperware for. It doesnt make sense. plenty of fresh food in the sea
This is profesional level.
Great, but out in CA you never answer the phone! For months! Not good service
C L18 hahaha!!
Liar
So much crack in this video, one would die of OD.
routing cracks is a good way to use more material when charging by the pound
This type of seal coating works - squeegee is imperative for quality seal coating. The companies that just spray and walk away are taking your $. Brush and squeegee are a must. Good video.
You d!ck ....this is what u call a big head
Thanks Dillinger. FU
Says who
Fuck you too - douche!!
Spell it out - it’s more effective.
Says the guy who sells the equipment.
This is how they do it ok.and ii am showing you.the ob.they ste doing ok.god bless you.my.big brothers ok.we llove you my dear friend ok.all.over the whole world ok.my desr .
New guy @ 6:27
I know a few things
Soooo slow😢
For god sakes, can you get any newer equipment. The stuff looks un touched. From the scrubber to the sealer. Even the brooms and the dudes gloves are all brand new. Show what this equipment looks like after a few weeks and be real.
What a stupid comment
That is a lot of crack.
the ultra-rare type🤣🤣
👍🏻
Right Audio Channel Delete =✅
That blower sucks.
Lol, your sealer is garbage - Its constantly watered down from distributors. There is always trash in it, but you'll probably never mention flushing dirty sealer out of old tanks which have not been properly cleaned prior the winter before, so whatever. No one ever, is going to fill cracks in a parking lot out of a 1 gallon tube, so why advertise that? Machines are "ok" at best, but some don't come as advertised either. Shocker right? Thanks for sharing, glad I got to comment the truth.
you tell em Nate!
that means that liquified coal tar is best for this. Forget the enviro-friendly part.
@@rearspeaker6364 coal tar in general is always cut. My point is they don't watch what their distributors do to it, and they completely trash their product
LIAR
@@daveklein2826 Oh, all caps. Someone must've gotten mad.