I just did this install on a 2023 F150. I took the time to reaffirm all the tie down points and load management system. Didn’t take too much extra time. That includes the rear lights and power outlets that I can’t believe you simply covered over!!!!!!
Well done. Looks really good. I like the way you took off the tie downs and covered everything. That's the way I'll do it. I won't need them for a camper. Looks like it makes for a pretty good layer of insulation for the camper. I like it.
For your box anchors with longer metric machine screws you can just punch two holes in and then anchor them into factory holes. saves slicing the sides of them.
Oh no, you sealed the perimeter of your bed. Those gaps are supposed to be there for drainage and ventilation. Oh well, now you have an awesome bathtub. Nice cap.
Great video showing install struggles and results. General question witj your Topo topper, if you were to install DECKED system, would you be able to situp with top remaining down?
Now all you need in there are some lights. Get the round -70* trailer 4 wire, that would /should do for your needs? Either a round cutter knock out cutter and a Strain Relief connector of that size will work. well. to the battery two fused and two for to your grounds.
I see already behind your left wheel well, that there is a gap . Try to get the ???? Silicone into the joints as that will help it stay there. I would have used Sika Flex ,as it works better. When calking try to force it into the cracks so as to hold it.
I just did this install on a 2023 F150. I took the time to reaffirm all the tie down points and load management system. Didn’t take too much extra time. That includes the rear lights and power outlets that I can’t believe you simply covered over!!!!!!
Well done. Looks really good. I like the way you took off the tie downs and covered everything. That's the way I'll do it. I won't need them for a camper. Looks like it makes for a pretty good layer of insulation for the camper. I like it.
Thank you, for actually showing us how it’s done. Since this video is a year old now, how has it held up? Has it gotten wet?
For your box anchors with longer metric machine screws you can just punch two holes in and then anchor them into factory holes. saves slicing the sides of them.
I'm struggling figuring where the white tap or goes. Thanks for sharing the Oops.
Oh no, you sealed the perimeter of your bed. Those gaps are supposed to be there for drainage and ventilation. Oh well, now you have an awesome bathtub. Nice cap.
Great video showing install struggles and results.
General question witj your Topo topper, if you were to install DECKED system, would you be able to situp with top remaining down?
Now all you need in there are some lights. Get the round -70* trailer 4 wire, that would /should do for your needs? Either a round cutter knock out cutter and a Strain Relief connector of that size will work. well. to the battery two fused and two for to your grounds.
I see already behind your left wheel well, that there is a gap . Try to get the ???? Silicone into the joints as that will help it stay there. I would have used Sika Flex ,as it works better.
When calking try to force it into the cracks so as to hold it.