Greatly helpful and explanatory video!! Please post more work on these new Beverly HPE as there is almost none existent so far. It would also be helpful to see in a future video how the main plastic panels are removed.
Hi my friend i have a question. I bought before two months a Beverly 400 hpe. Wherever I go with it, even when I work on it, the ventilator does not open. However, when the engine warms up and I make stops in traffic lights the temperature rises easy to 105 and the fan turns on. I have not seen this on other scooters. I checked the coolant is ok. Fan opens about 30-40 seconds and then stop. All this think is from the manufacturer or is something false. Many thanks!!
Robot, thank you for nice content! Please, if you can make a video how to change a brake fluid on this scooter. I have a Beverly 300 hpe and try to remove plastic covers around the brake levers, but it's so stif that I am afraid to break that cover. I want to do by myself because I don't have trust in the services at my contry. Thank you.
Hi, i have a problem with my Beverly police 300. When accelerating, the lights of ASR start flashing and does not receive full throttle, it's driving with 30% of power. It has 12000 km and original belt. Does anyone know what the problem is?
I think I have a problem with mine. It just cutout one day, and wouldn't restart (winds over but no ignition) then after about 10-15mins it started back up again and went for for about 10 mins, then the same thing happened. I sounds like an overheating problem with the fuel pump as it runs fine on small trips and I only get these cutouts on longer rides, and it fixes itself after cooling down.
I have a Piaggio beverly 300 IE from 2013. How much oil should be in the transmission 250 cc or 400 cc. The instruction says that 250 cc, but it also says that the oil should be on the second cut of the indicator and when I pour 250 cc, it is on the first. Please clarify if there is a mistake in the manual.
How do you charge kilometer to miles? I've tried holding down the mode and toggling until mph steady... Then holding down the set button then tried holding down the mode button... It always defaults back to kilo... Any help would be appreciated...
Hi Robot, I've bought a brand new bv 400 and when the engine is cold it takes a while before is starts..when the engine is warm it starts immediately .Is this normal with a new bv 400?
I just bought a BV 400 at Portland Vespa. I watch your videos with heightened interest.
Kako se pokazala ova mašina 400 hpe vidim da se dosta ljudi žali a imao sam u planu kupovinu
Greatly helpful and explanatory video!! Please post more work on these new Beverly HPE as there is almost none existent so far. It would also be helpful to see in a future video how the main plastic panels are removed.
This guy knows his way around these machines!
With Robot's help I was able to change my BV 350 Belt, Oil change, gear box and engine, and the spark plug. Thanks.
Great video Robot!!! Keep up the awesome work, so cool of you to share your knowledge with the world!😎👍🏼
Thanks for the video. I was looking forward to this. Cheers.
Excellent service video. Many thanks.
Thanks look forward to a ride review keep up the GREAT WORK 😎
Watching this as I couldn't find anything on my 2022 MP3 400 HPE sport! and I beleive this is the same engine, so thanks👍
THANK YOU sir.
TOO GOOD.
10/10.
... as always interesting and educational presented... thank you for this.. 👏
adamım, bizler için çok faydalı bir video paylaşmışsın çok teşekkür ederim emeklerine sağlık.
Thanks again for the great video! Mr Robot 💯
Very interesting.
Robot! I need a explication how's Piaggio Beverly 400 cc is going on about any possible problems.
Hi my friend i have a question. I bought before two months a Beverly 400 hpe. Wherever I go with it, even when I work on it, the ventilator does not open. However, when the engine warms up and I make stops in traffic lights the temperature rises easy to 105 and the fan turns on. I have not seen this on other scooters. I checked the coolant is ok. Fan opens about 30-40 seconds and then stop. All this think is from the manufacturer or is something false. Many thanks!!
Thanks for the video.
Awesome video. It's so hard to find any info about this bike online.
Robot, thank you for nice content! Please, if you can make a video how to change a brake fluid on this scooter. I have a Beverly 300 hpe and try to remove plastic covers around the brake levers, but it's so stif that I am afraid to break that cover. I want to do by myself because I don't have trust in the services at my contry. Thank you.
Może coś na temat PIAGGIO BEVERLY 300 , oraz PIAGGIO MEDLEY 125
Hi, i have a problem with my Beverly police 300. When accelerating, the lights of ASR start flashing and does not receive full throttle, it's driving with 30% of power. It has 12000 km and original belt. Does anyone know what the problem is?
Thanks Robot!
Always remove the oil filler caps both engine and gearbox to assist full drainage of the old oil
How many miles to the first servicing??
😊Thank you so much! Have the Beverly 400 also problem with fuel pump?
I think I have a problem with mine. It just cutout one day, and wouldn't restart (winds over but no ignition) then after about 10-15mins it started back up again and went for for about 10 mins, then the same thing happened. I sounds like an overheating problem with the fuel pump as it runs fine on small trips and I only get these cutouts on longer rides, and it fixes itself after cooling down.
Hi robot. Love your video watch them all. Learnd a lot.would you have side bv400 hpe side badges as I need two and will you post to England thanks.
How is the Level of gear oil for Beverly 300HPE? They are so many lines- which one is min. and which one is max. Thank you in advance
Great video!! Very well explain. I was wondering at how many miles is the first service recommended? Thanks.
Me 2
@@VictorSanchez-jr2yp according to me, servis after 2 miles is to short 🤠
You the Best
thx
Thanks bro❤
I have a Piaggio beverly 300 IE from 2013. How much oil should be in the transmission 250 cc or 400 cc. The instruction says that 250 cc, but it also says that the oil should be on the second cut of the indicator and when I pour 250 cc, it is on the first. Please clarify if there is a mistake in the manual.
Where did you find the slightly wobble 8mm socket to remove the oil filter cover. Looked everywhere can’t find it!! Help
Someone please!!!!
Great video! I have BelRay 80w gear oil, safe for wet clutches; would that be okay to use on a 2020 BV350? Manual doesn't specify the weight.
Merci beaucoup
How do you charge kilometer to miles? I've tried holding down the mode and toggling until mph steady... Then holding down the set button then tried holding down the mode button... It always defaults back to kilo... Any help would be appreciated...
Thanks
Muchas gracias por el video
Thanks bro
Hi Robot, I've bought a brand new bv 400 and when the engine is cold it takes a while before is starts..when the engine is warm it starts immediately .Is this normal with a new bv 400?
Kako se pokazala ova mašina 400 hpe imas li ikakvih problema iz osobnog iskustva planiram kupovinu ali sam cuo da se dosta ljudi žali
what mileage is the first service due?
What kind of sealant would that be for the meatball cord?
How we check the oil level in dipstick;
Thank for vídeo.
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
How much oil consumption is ok?i heard that many beverly 400 have increased oil consumption
Mine has also increased consumption. It took about 600ml on 6000km. I noticed lots of oil in air filter housing, wich doesn't look right to me.
Nightmare to get at the spark plug
Should have removed the engine oil dipstick before draining the engine oil
I bought a new Beverly 400s after a month the turning signals are not working. Has anyone the same issue?
♥️♥️♥️🤟💪
Q