2007-2016 DODGE/CHRYSLER VEHICLES CRANKS BUT NOT START - TIPM TEST - DODGE RAM
Вставка
- Опубліковано 8 лют 2025
- Today I'm working on a 2012 Dodge Ram but from what I've seen this issue comes back from 2007 on some Dodge/Chrysler vehicles, on this truck I determined that we have a Bad fuse box and a good Fuel pump!
Other cars that have this same issue!
2011-2012 Dodge Durango
2011-2012 Jeep Grand Cherokee
2008-2016 Dodge Grand Caravan
2011-2012 Dodge Ram 1500/2500
2008-2016 Chrysler Town and Country
2009-2012 VW Routan
2007-2016 Jeep Wrangler
2009-2010 Dodge Journey
2007-2012 Jeep Liberty
2007-2011 Dodge Nitro
IF YOU HAVE ANY QUESTIONS JUST ASK!
** If the video was helpful, remember to give it a "thumbs up" and subscribe. **
Follow me on INSTAGRAM
/ falcons_garage
Twitter.
/ shospeed
Garage's Facebook
/ falcons-performance-an...
Facebooks Hobbies
/ falconshobbies
My Gaming Channel.
/ @falconsgaming
Disclaimer:
Due to factors beyond the control of Falcons Garage, I cannot guarantee against improper use or unauthorized modifications of this information. Falcons Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in my video. Use this information at your own risk. Falcons Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Falcons Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Falcons Garage
My van had this exact same problem. I tested it exactly the same way and using a power probe and it started with the 12v from power probe. I ended up putting in a used fuse box/tipm, I found one with the same part number so it fired up as soon as I replaced it and everything else worked as before. Another option is to order a bypass relay circuit from this company called Vertical Visions that just plugs right in the fuse box. The only reason I didn’t order it was was because it would have taken 2-3 weeks shipping from USA to Canada, so I was super lucky to find this used tipm at the wrecker. This video was super helpful thanks !!
You just saved me hundreds fixing my wife's Ram 1500. I can't thank you enough.
Very good my friend. That’s what I call an unsmart fuse box........🤦🏻♂️
No, that's what we in the IT industry call "designed obsolescence" - put the part most likely to go out in the most difficult to repair without replacing a more expensive component spot and make some $$$. Same reason most cellphone batteries aren't removable anymore.
Thank you! The fuel pump relay fuse was the issue!
When. U say fuel pump relay.. Can u hear ur pump turn on?
Mine started great today went 1 mile and went into the store came out 15 minutes later won't start. Truck kept turning over and over which was strange but engine would start. Battery is good. Wishing now it was my battery
@@tonysevilla4039 a failed relay causes it to either not come on, or stay on even when the vehicle is off.
I have a 2017 durango rt and it has the same problem. Might just rip a tipm off another durango at the dealership. Nothing but electrical issues. Not paying for the parts anymore
I put in a switch on the dashboard l call it an anti theft device...your vid helped me out thanks...2012 Ram
Nice!
You rock! That is the exact problem that I have, and I would never have figured it out on my own. Thanks man.
Did you fix the problem?
Great! You solve my problem.
My 2007 Dodge Nitro R/T may have this as the issue. Thanks for sharing. Gives ma a place to start.
Good luck!
Was It ? Lmao I Have Same Car Same Issue I’d Hate To Give Up On Here
Her*
Good Knowles big guy
Awesome diagnosis!❤
Thank you! 😊
I have a 2015 challenger and have had starting issues for a couple years now. This is very frustrating, I feel like either getting a bat and destroying the car or getting a lemon law lawyer and taking the dodge dealer to court. I just brought it back from the auto shop, and they told me it was just a blown fuse. 3 weeks later, the car cranks but doesn't start once again. This has happened 3 times, which is unacceptable on a car under 50k miles. The fuel pump is like new, replaced at the Chrysler dealer. This is a beautiful looking car just a headache with the starting issues. I very much just want to get a reliable toyota camry and stop spending money on continuously fixing my Challenger.
Thanks,I'm going to go check this out now
your amazing bro big kurdish respect to your
Thank you so much
same problem in my car - we bypassed the relay and added a fuse in the outside - works just fine, but the fuse burns out everyonce in a while and you can't start the car till you change the fuse
Thanks for the useful info!
Good job👍thanks
Hey thank you for this video I love it!!! Is there another video that shows how you fixed the problem please
no sorry .. when I put the bypass fuse on the bottom of the fuse box .. customer was in the shop and needed the car fast .. so didn't have the time to record it
Thank you friend very very
Usefully. Information
Paul Rodriguez is a mechanic now 🤔
thats a new one .. LOL
Great video. Thank you
Glad you liked it!
Good, this maybe what's causing my truck not to start. But that's a costly repair!
No, I already tried this with no luck. I have a different problem
good luck on your repair
@@FalconsGarage Thanks, a day full of experiments awaits for me tomorrow!
@@RobCabreraCh so what happened
How do you know which way the power flows?
I usually go by the diagram
I have this problem. Have you done a video about your preferred repair? Thanks for the help!
I didnt get a chance to because the customer brought me a used fuse box and was waiting while I swapped it, but thats what he wanted to do
This is exactly what is going on with me 2016 charger sxt how do you bypass it ?
They do sell bypass kits.
@@FalconsGarage can you send me a link to get the by pass kit cause idk what to type up
Man these vehicles, I definitely have a crank no start, I thought it was my relay but I'm not getting a P-685 code so maybe my relay is intact after all.
Does the Chrysler 200 have the same issue as those listed?
not as far as I know
Good work! Most shop wiill rip you off for a new fuse when all you need to do is install a new fuse or a circuit breaker and bypass the relay. Ive never done a fuse box or repair on this type of vehicule. But ive done bypasses and know what works and what doesnt. What i also know is the manufacterers pay engineers the big bucks to designthese these types of sysrems and circuits. I bet a monthes pay that a bypass fuse will work just. My preference is a ciruit breaker
I got a 4th gen ram 1500 with no power to the vacuum pump fuse or trailer right/left fuses. When I put a probe light in the brake booster plug the ground signal pulses..any idea? Tipms suck
maybe a bcm problem?
I’ll try to check Bcm. I can’t get the dealer to look at it until Wednesday and I don’t have a warranty. So bummed. Thanks for reply!
How much do u charge to rebuild a dodge caliber tipm
Tell me please what kind of tester is that you just used?thank you i really apreciate that
It’s a power probe 3
BEAST!!! Thanks man!!! Great WORK!!!
2011 Ram w/4.7 ltr. Does the same, cranks but won't start or hard to start. had Same prob with fuel pump, stays on after truck is turned off. disconnect battery then reconnect helps.
took to mechanic code came back "U1449 implausible ERS message received,"...is this the fuel pump relay problem??
could be, does the fuse keep blowing?
Hey bro awesome video my 2016 Dodge Durango started doing the same thing .I purchased a new tipm installed and it fired right ran fine for about two months now it’s doing the same thing .Some days it will start and then it won’t .Dont know what to do bro out of warranty and the dealer won’t give me a straight answer
they never will.
was the part NEW? or used?
if it was new it should have warranty... no?
Falcon buenas noches como estamos ? Una pregunta. Mira tengo una 2002 Dodge Ram 1500 y pasa k la camioneta prende y puede kedar prendida asta unos 2 minutos a 10 o 20 minutos pero de rrepente se apaga y sila prendo luego luego buelve a prender pero como alos 3 a 5 segundos se apaga nueva mente. Y si la prendo de nuevo pues buelve a prender pero de nuevo a los 3 a 5 segundos mas o menos se paga otra ves asi puedo estar todo el dia y la faya persiste. Alguna idea o consejo k me puedas ayudar?😬😬👍👍 avisame si puedo mandarte mi numero para darte mas detalles de este problema ya tengo 6 meses sin usarla por el mismo motivo pero ya le empese a meter mano aver k solucion le puedo dar. La computadora ya me la destaparon y chekaron y segun esta buena pero se k usted es el bueno jeje espero y tenga tiempo de ayudarme de alguna forma. Muchas gracias y bendiciones. Cuidese 🙏🙏👍👍👍
yo chekaria codigos del motor, que la llave no se este desprogramando ... presion de gasolina etc
@@FalconsGarage buenos dias dejeme buscar el ultimo codigo k le avia salido y se lo mando en segida. Mil gracias🙏🙏👍👍
Buenas tardes como estamos. Mire el ultimo codigo k le avia salido era el p1684. Ya de ahi se le desconecto la pila barias veses y la verdad como no tenia la computadora puesta no la e arrancado pero ese era el ultimo codigo k alcanse a scaniar
ese codigo es difisil de saver que es .. tiene muchasposivilidades ...puede ser computadora de tranmision mala .. problema con el hadness ... problema con lacomputadora del carro ... o pude ser nadamas ... baja bateria
@@FalconsGarage buenos dias. Asi es con ese preblema estoy horita 🤦🏻🤦🏻🤦🏻
How do you huck up a targoswichto the to the fuel pump on a 08 dodge nitro
What if you get the car started spraying starting fluid, and it runs fine, idles fine, but will not crank on the initial start.
Wait. How do you get it to “crank” if it doesn’t crank?
I hope that makes sense.
I think your saying it cranks but it doesn’t start, BUT if you spray starter fluid and it does turn on you probably have “fuel issues”
I have a p o s chrysler300 n it cranks but won't start now I shut off to air up tire n it went to start but actin like jot get fuel I changed relays n fuse n still nothing so I bought both fuel pumps but guy said turn key on n see which pump vibrates n I tried but it dnt sound like either r startin up so im put startin fluid n were a sensor goes into the air intake n see if it starts if it dnt start I was told it's the fuel pump or pumps if it dbt start its spark plugs or somin else but im sick of this pos
I have this vehicle same problem how do I change the fuse relay? Is it under the fuse box?
its integrated .. cannot be changed
i need your help, I have the same o2 connector as in your video, 4 wire, 2x whites for elements and black/gray for signal. I been getting 0141 and 0138 which points to the downstream o2, and i replaced it and still getting hi volts b1s2. i checked the voltage on the truck side, as in your video, and im getting 13v for the elements and 4v for the signal. my upstream sensor is working fine and no other CEL codes have returned its always 0138 and/or 0141
good morning, brother. Hey, can you please help me out with a cuestion I bought a 2011 dodge caliber, but it doesn't have the intake magnefull runner control valve. Is this normal ?
Thank you for shearing your knowledge greatly appreciated!
2100 dodge GC. 3.6 similar problem. Was tokd it was the fuel pump, justbreplaced it. Can hear it going on but still not gas getting in the lines and doesn't start. Spark presen, will start with starter fluid. Already tryed to bridge M25 fuse with cigarret lighter one. Fidnt work. Help would be really appreciated Mil Gracias de antemano!
so new fuel pump and you can hear it .. but you there is no fuel getting to the engine? i would check the line it self .. maybe even fuel filter
@@FalconsGarage Ty for the replly, is a 2011, went to far ahead on the year LOL. Yes, I can hear the pump going. Not sure this car has a fuel filther; couldn't find it. I will check the line now. Wondering if may be the power cuts off when the starter goes on. Is ppsibke? If posible, what would it cous it?
I really appreciate your help solving this puzzle! . Thank you!
I have a 2007 dodge magnum. It cranks but won't start. Can I just change out the fuel relay fuse?
Are you sure you have no fuel?
We thought that was the problem with my 2015. Tipm is fine. We put a new fuel pump module new pump new fuel pressure sensor map sensor an vehicle still starts then dies right away.
It could be an issue with the key/chip. My key is messed up and if the chip is out of place, it will start fine and immediately shut off.
@@jacobwatts8164 makes sense. It does this with both keys though. Something is shutting the pump off. Everything shows to be running but pump is flat lining.
is your theft light on or flashing? any check engine light codes?
@@FalconsGarage theft light isn't on. One code pops up but can't remember which one it is? Once we hook computer back up to it today I'll get back to you.
@@FalconsGarage what a pain that was but it wound up being an easy fix. The guy that originally worked on said he replaced the fuel pump. We dropped the tank an the original pump was still installed. Slapped a new one in there and works fine.
Do you have any video from Dodge Charger 2015 SE
My car died not power not crank at all,
It has a new battery alternator good not crank at all it has only 61k miles
Any help or information to share thanks and have a great day
check the main fuse .... all fuses
great video I have issue I was driving fine and truck stalled when trying restart the starter kind of stays on keeps cranking unless I turn the key all the way back then it stops cranking and truck wont start fuse check one was burned out it was at 38 I replaced it and I put in new EGR for 45 didn't fix anything I have 2007 1500 ram hemi same thing wont start and starter stays going when key turned on have to turn key all the way back to stop the cranking HELP and thanks
as far as the car keeps cranking.. some vehicles the computer keeps cranking it until it feels the car is on. what is the car mission? fuel or spark?
Did u fix this? I have same issue.
Is the bypass safe to do ? Seems it saves a ton of money
I havent had an issue with a bypass .. but there there is an option I would recommend changing the entire thing
Amigaso. Lo acabo de hacer en mi ram. Pero le meti corriente al fusible y trabajo pero la apage yvya trabajo bien sin meterle corriente a ese fusible 😮
Good info 👍 😊 thanks so much
My fuse box looks different on my 2009 dodge ram?
if its diesel or different trims will have different fuses
Tengo un 2005 dodge magnum que solo starea pero no arranca le cambiaron la banda del tiempo duro una semana despues se escucho un ruido como una turbina llega a poner gasolina y desde ahi ya no me prendio mas el mecanico que le cambio la banda del tiempo dijo que el motor se amarro iba ir segun a destaparlo para salir de dudas si la cadena del tiempo estaba bien y ya no regreso crees que podria ser esa la falla la que tu isiste en este video
no creo que esos carros tienen la misma cajade fusible... no creo que sea este tu problema
Una pregunta tengo una 2011 ram le remplasaron la gas pump y despues la tubieron que aser bypass
Y ahora de repente se prende sola o se agarra pitando sola crees que si le remplaso la caja de fucibles elimine todos estos problemas
La verdad yo creo que es un problema con la alarma ... es aftermarket la alarma?
Pero de todos modos ay muchas cosas que a ser test antes de cambiar cosas
Es tu horn switch el de volante tienes k cambiarlo.. esta adentro.. eso mr paso ami
I have the external relay with the 20amp fuse but yesterday I try to start my car and it won’t start and I check the fuse and it was blown , I changed it and fuse keeps going bad , any suggestions on what it could be wrong ?
I would check what ever part that fuse goes to
Falcon's Garage the fuse goes to the fuel pump , Jeep installed it as the recall for the fuel pump fuse
Hey just curious if you remember, did that fuse have any power going to it at all when your tried to crank it? My brothers 2016 Durango is having the same issue but my voltmeter is showing 12v at the fuse when we try to crank. Really don't want to drop the gas tank.
no, it had no power on that fuse, you can see it on the video
What kind of tester is that
its a power probe
amzn.to/34yURYc
After changing fuel injectors on My 2004 ram 3500 5.9 Cummins wouldn’t start. Took it to a diesel shop they had it all summer couldn’t get it started. I’m going to check the fuse and relay. Thanks
@@bobcole7899 I dont know how similar the gas and diesel fuse box is to be honest with you .. but good luck with it!
2009 Dodge Avenger rt 3.5 l does this car have that problem? I put a new fuel pump in and it run well for about 6 blocks then died and now won't start. Any ideas?
Hi I do have a question I replace the engine on my 2009 dodge challenger for one of a 2014 charger both are 5.7 hemi, but now it crank but won't start any of you guys have any idea what will be the problem, if there is any differences between 2009 to 2014, help please
make sure your key is still working or the antitheft hasn't turned on, did you check if it a fuel problem or what it is?
@@FalconsGarage i will do that on the next couple of days, I did put my scanner and I didn't get any codes, but I will double check what you said, I was reading some on Google about to reprogram the ECM but I'm not 100% sure if that'll be the issue, thank you for responded i appreciated.
My truck doesn’t get any power on the dash or the diagnostic to check
try checking the fuse for the cigarettes' lighter!
I did the fuse was burnt I replaced it and still nothing
your next step if look up a wiring diagram and see what else does this fuse power
mine just won't crank. died while driving. now I have replaced computer and ignition module ,wcm,
But I got fuel and spark and still doesn’t turn on??
you need fuel, spark and compression for an engine to run
2008 300 3.5 crank. But dnt start I have replaced both pumps and got a code for po463
are they getting power? there is lots to check here
siguele dando!!!
gracias
Hi. My TIPM is full voltage, 12.68V, but the starter relay is not getting power... Does the fuel pump engage first, or is there anything before the starter relay? ty *I think it is not getting power to the relay, because if I remove the relay and jump it with a wire, it will crank. Still doesn't start, but it's half way there.... lol
not sure .. would have to check out diagram .. but also check out the wiring coming from the ignition switch
I have a 2016 ram 1500 5.7 e
Hemi
I put the key in.. It just cranks i turn the key off the try to start it.. It cranks but doesnt start
I turn the key again it starts right up..
It only happens sometimes. Not all the time.. Its happen to me 3 times with in the year.. Could it be a fuse or maybe a update?
sounds to me like a bad fuel pump .. that wont leave pressure on the line
nope... just read something about the computer.. if it's 100 degrees or over outside the truck will think it's over heating and not turn over as a safe switch... i went to the dealership and they said the same thing. so what i do is crack the window a bit and it has nott happen since.. hows that for a computerized truck lol these trucks now days
i have a 2012 dodge Durango and the dealer put a relay for the fuel pump. Ive change the TIPM twice the throttle body and yesterday a new fuel pump. i went to turn the car on i didnt hear the gas pump. i heard the relay click and nothin. i moved the TIPM module and it turned on. Before i put the new fuel pump it was i the dealer for 2 days and they said they couldnt duplicate the problem. Please help if possible
there is also a connector that splits the front hardness going into the back hardness under the driver side front wheel ... somewhere around there ... check that too
Hey I have a 2013 Chrysler 200 sedan new battery out in today cranks but no start
did you check spark & fuel
Thanks for sharing information
I’m having problems with bottom part of 2.7 turning over but top part won’t crank. Any help would be greatly appreciated!
Buena informacion brother,
Was there a code thrown for the bad relay?
No
Same sound no bad fuse though and I replaced the pump?
I would make sure it’s a bad part before just replacing it
So question, is the tipm (relay) clicking while attempting to start ?
I just changed the fuel pump on my 2015 Durango due to car cranking but not starting now i have the same problem again cranking but not starting I’m looking at the fuse box and I hear the relay clicking when getting ready to turn on or attempt to turn on
Did u figure it out my 2016 dodge charge se is doing the same thing
Was your fuel pump aftermarket? I heard they come with a harness that is wired differently than the original oem fuel pump cap harness
Hey I was wondering if a bad tipm would cause the radio not to work. The radio works fine but it doesn’t turn on for some odd reason I have a 2007 Chrysler Sebring.
Does this work for a 2012 Chrysler 300?
could be but not as common
So I have this problem, but it only happens when the van has been off for between 1/2 hour to three hours. If I turn the van off and back on within 20 minutes, it's fine. If it's the first time it's been turned off in many hours, it's fine. It always starts once I turn the key off and back on again.
could be a bad pump
@@FalconsGarage This has happened for three years now. I also have other electrical problems. (one door/window doesn't work at all, back door ONLY opens/closes electronically-if you shut it manually it will not open again...transmission randomly won't go into third gear, etc.)
Hey brother love you video, I own a Chrysler 300c 2006 5.7 hemi I recently swap the motor, once everything was finish the car will crank but won’t start will it be possible that it can be the same problem with my car? I will appreciate the tip.
could it be .. yes but I would double check everything else ... what is it missing? spark or fuel?
It has fuel I add some fuel but know that you tell me need to check if it has spark.
Its the same for the 2500 diésel or just for gas?
for the lift pump yes.. not for the high pressure pump
@@FalconsGarage yes I I know just the lift pump on both cars
Gracias brother ya te sigo por el otro canal
Gracias
Great video! Is your shop in Los Angeles?
no texas
hey so i have a 2012 rubicon doing the same thing. but when i test either side of the m25 fuse legs im not getting anything. i jumped the leg for the pump directly and still not getting anything. if the fuel pump is bad would it still try to draw power from tipm?
have you cheeked the relays?
Where are you located at because my truck has power the dash come on the radio come on it just won't the dealership is telling me it's the motor
Muy buen video, a mi grand caravan '11 le entró agua al motor no sé si dañó un pistón o cilindro, estoy en el punto de que quité el upper intake y 2 de los 6 orificios tenían agua, dos bujías igual. Quité ese mismo fusible el de 20A, viene siendo el M25 en la mía, pero tengo miedo en arrancarla o mover el crankshaft con un ratch para ver si se le sale el agua o si gira, qué me recomiendas? (hydrolocked)
You are amazing thanks
Tengo este problema con mi Journey 2009 y no sé si es el relay o la bomba mi inglés no es muy bueno
How about if the truck stalls out randomly ? I replaces cam , crank sensors , EGR Valve and gonna open up the pcm . But can this also cause random stalling ? It’s a 2010 journey
not likely.. sounds like you have a different issue ... any lights on in the dash?
Falcon's Garage it was the damn pcm brother one connector keeps getting water and it just screws the entire ignition system but thanks for the video man keep me coming bro😎
Thank you for sharing quick question how much would u charge for going in there and replace the original fuese ? Or just to have an idea of how much will it cost to replace I’m having the same issue thank you again for the great info on your videos
I think you mean the original relay .. and you really cannot .. you need to by pass it or by a new fuse box
why not try a hard reset first? I've seen same issue then they did hard reset and problem solved.
because this is a VERY common thing .. and that would not fix it
Can I test it with a voltage circuit tester?
How would I bypass the relay?
adding a fuse on the bottom of the fuse box on those connectors .. i know its vague but it is possible
Cambiar El fusil ?
??
Cambiando El fuse y El relay funciono bien..
Le cambiaste el fusible que esta soldado abajo de la caja de fusibles? Si no va a ser temporal la solution
Le cambiaste el fusible que esta soldado abajo de la caja de fusibles? Si no va a ser temporal la solution
I was told this would not work on an 08 Ram 2500 6.7 diesel. What is your take?
Don't quote me on this, but this should work on rams after 2011..the 2010 and maybe earlier?? Have problems with the relay
It's harder to jump the internal relay on the older boxes because it goes power, fuse internal relay, fuel pump
On the 2011 and newer ram boxes it goes power internal relay, fuse fuel pump.. so if it's a problem with the relay on a 2011 and newer box you can just jump the relay..on the 2010 ram and may e older both sides of the fuse are always hit cause its before the relay so you might have to run a line from a cigarette lighter to the pump itself if the cig is key on power or else you'll keep the pump running
ave the fuse before for internal relay so on a 2010 box both sides of the fuse will be hot.. on the 2011 and later the fuse comes after the relay..so you can jump the and just supply power to the fuse
An 08 ram might have a regular style relay
Any idea's on a fix?
you need to do process of elimination. and move from there ... is it dying because it dosent have enough spark, enough fuel, or enough air .... and then move from there ..
@@FalconsGarage thank you. We'll keep messing with it this evening. Brother is coming by with his computer to see what it's doing in real time. Hopefully that will work for us.
@@FalconsGarage I appreciate your response. Great video you posted.
I have the sa.e problem 2009 dodge grancaravan
What did you end up doing to this vehicle?
I bypassed the fuse with an external fuse I isnatalled under the fuse box. But couldn’t record the process because the customer was in a rush
@@FalconsGarage Thank you. Would have been nice but I understand.
HI MY CAR IS DURANGO 2013 IF I START THE CAR AFTER 5 OR 10 minute its stop and run again... What I can do? I change The computer and still do.. 😔
I would recommend taking it to a mechanic or the dealer.
I having problems with a 2015 Dodge Durango I disconnected the fuel and I’m using the power probe so when I give it power the pump does not turn on or no gas comes out is my pump the problem
most likely
Falcon's Garage did you make a video on replacing fuel pump
no, there was nothing wrong with this fuel pump.. so didn't have to replace it.
thanks for the video, I have the same issues with my truck however when I hook it up to jump cables it starts up. Mind you my battery is brand new and can't be the issues. So what do you think would be the reason why it starts when the truck is hooked up to the jump cables
Interesting. Have you checked the main fuse? Or the battery cable fuse if it has one?
When you don’t have it hooked up to jumper cables what exactly does it do?
@@FalconsGarage sometimes it starts and sometimes it's just turning the crank but not starting
@@FalconsGarage btw the engine is always cranking so battery is supplying power to the starter
@@KristijanJankovic very weird. I would check on what’s missing when it won’t start, fuel or spark and then move from there.
I have a dodge nitro 2011, The car doesn’t start it only cranks but don’t start, the key fob doesn’t work And I need to open the car manually and when I try to start the car I can’t and all the lights on the board are on, the electrician already took the computer out from the car and scan it to see if there was a problem but there was none, I’m so stress because the car doesn’t start and nobody can find the issue, do you think it could be the tipm?
is the car not getting any fuel?
Falcon's Garage no it’s not, they change the TIPM the car work for one day and next day the problem came back
did they check the fuel pump?
some fuel pumps fail after they get hot
Did u ever fix the issue? I am having same issue.
Ever find a fix ? Thanks ahead of time 👍
Yo tengo una Dodge Ram 2011 la pinpa se le quedo prendida mi hijocreia que Hera un releys pero ya la chequeo pero todabia esta prendida tengo que quitarle El fuiste cuando la prendo para q no descarge la bateria
The whole fuse box? Wtf
I have a similar issue on my 07 Chrysler seebring, car starts sometimes and then immediately stalls and sometimes doesn’t start at all and keeps cranking, I replace the TIPM with a used one 08. Issue came back after 4 days. Could this fix work? I don’t see a fuse to test for the fuel pump. Help with be greatly appreciated thanks!
ill see if I can find the diagram for it tomorrow at work
En un craysler no prende. Y le paso corriente y ase corto cuando dle pongo lis cables
que ase corto?