DIY Sheet Metal Bender - Bending (Plans available)
Вставка
- Опубліковано 1 тра 2021
- Plans: www.etsy.com/de/listing/99802...
Plans to my other projects
madebythemetalist.etsy.com
New Video Sheet roller: • How to build a DIY She...
My Welding Table: • Welding Table Build wi...
Like always, I have something in my head and then I start to build it and while building, other ideas come to me.
And then after that i draw the plans.
Worked our very well this time 😁
I wanted to make it as small and smart as possible. At the moment its possible to Bend 750mm long and maximum of 1,5mm thick steel, shorter should be 2mm possible. To build it for 1m should be also possible.
To turn the Bending (hold-down angle) die (1mm or 2,5mm) for a bigger bending radius is very importend for thicker Aluminium (upcoming projects). If its to small, it could happen that it will break.
To screw it on the my weldingtable and have a flat workspace was very importend for me.
I have built a second hold-down-angle device that I can change if necessary. I'll use this if I have to make some boxes....I will ad more and more cut out when i needed it. - Розваги
My kind of video . No mindless bullshit babbling and quirky music. Straight up fab. watch and learn at an accelerated pace. Nice work , your efforts are appreciated.
Thank you 😁
we have the same opinion ... simple staight Videos 😁
Finally, a channel without music and excellent content!
Thank you 👍😁
LOVE IT
No shitty music, no long drawn out intro. Just straight up no nonsense badass engineering and metalworking. Subscribed.
Man the beginning when you rolled out the sandpaper and clamped it down made me appreciate my vintage craftsman belt sander . Nothings built like that anymore .
He clicks the button "SAVE" and proceeds to click FAV... Killer video dude.
Thank you 😁
God bless you, artist. A wonderful instrument and useful content
One of the best diy sheet metal brakes on UA-cam 👍🏼👍🏼
Thank you 😁
You are very fortunate to have such a great shop! Not fussy or flashy, but everything you need. I especially love the table. Perhaps the most essential piece of equipment for precision work.
Thank you 😊
This is how videos should be. No talking, no music.
😁😁😁😁 my thoughts💪💪💪
Von deinen Videos habe ich schon ein paar gespeichert zum nachbauen, wenn ich mal wieder Zeit hätte😩. Beim zusehen bekommt man direkt wieder Bock auf schweißen, flexen, machen, tun...👍👍👍
Dankeschön 😁 Ja so geht es mir auch als wenn ich etwas seh auf das ich bock habe 😁
Are you sure you're not the MENTALIST!? Your creativity is amazing!!
Congratulations and thank you for sharing!👍
Thank you 😁 my pleasure 👍
I was half expecting you to end the video by folding a paper aeroplane out of metal! Incredibly well done, you simultaneously inspire and discourage me to do my own projects... 🤷♂️
Thank you 😁 Uh that that folding aeroplane is an awesome idea 😁
The welding was all TIG? Brilliant workmanship.
I was in the metal fab business for 40 years. I never saw a better Tig man. Very talented. Thanks for sharing
Thank you 😁👍
You my friend are a genius. Fits anywhere on your table. That shows that forethought to drill the table accurate in the first place pays dividends for all the tools you make to fit to it. ✌️
Thank you 😁
Hab mir exakt das selbe gedacht, nur auf deutsch 😅
talk about inspired design, you have some serious genius man
Thank you 😁
This is the best channel on the net. Just show me. No talking needed. NICE WORK!
Well done Dirk... you have great persistance and with this methodical one step at a time approach anything is possible in life.
Amazing video no loud music just pure metals.
Dude that slotted jig at the end was brilliant! Excellent video! Thanks again for doing what you do.
Thank you 😁
You are welcome 💪
super nice build! I've got one started and have been trying to figure out a box/pan function without the whole finger build and fit, I like your solution and versatility. definitely subscribed!
I’m loving how versatile that table is 👌🏾
😁
Truly amazing skills you have, your TIG welding is beautiful, and that bench is something else, I had one at work like that back in 1975!!!
Thank you 😁
I'm always impressed with your skill and creativity!
Thank you 😁
Man this welding table is so bad ass. I LOVE the bolt down holes here
Thank you 😁
I always thought you would have had to heat metal to bend it like that at home. Excellent video.
A really well made piece!! Been thinking about building my own for a while, and yours is excellent!!! The amount of options built in is great!! I think another huge take away from your vid is that my bench needs a lot of holes added... What a great idea for aiding in the lil fabrication projects!!!
I love the workaround for the metal brake. Great job. Will start working on mine tomorrow. Cheers!
Wow, that is an incredible brake you made. I especially like the modification so that you can pass the panel edges through to make a closed panel.
And the most beautiful welds and cuts. GODDAMN
Great video. I'd never have thought of tacking 4 pieces together and drilling at the vertex to make a quarter round for the hinge until I saw it.
Thank you 😁💪
Bro you always surprise me! I like that theirs no commentary, its fun trying to figure out what way you're going with your projects!
😁👍
Blown away at your skill and versatility.... wow, I'm going to build your table and your brake. Subscribed.... many thanks for doing this.
Thank you 😊 💪
Outstanding project. Thanks for sharing your work with us. 🙏🏼
I have been waiting for something like this to build for myself. Also, I must congratulate you on the video, no mucking about and quickly showed the build, fantastic effort.
522222222222222222222222222222²²2222²2222222555
I thought it sucked. no words, no opinions, no discussion.
I am sick of these speakless shows that can't say anything for whatever reason
There is so many elements to this video, 1. Fantastic metal brake 2. That table with its many capabilities, 3. Your metal working skills, Damn best video I've seen good job..WOW
Thank you 😁😁😁
I had to pause several times because I was so caught up day dreaming what I'd do with that workbench. It's glorious.
I'm going to make my own... and then use it to make a sheet bender.
Yeah, I love his table very useful too.
If anyone was wondering... he is using (Flange Nuts). No idea what size. Nice built, and love that there is no annoying music or incessant talking. I want one of these even though I don't need one.
Awesome 😁 Thank you
1 hell of a tool. definitely industrial class of ART. that is not just a tool but an ART
I press like first then continue to enjoy watching whatever your building. Wonderful plan and execution. And always video editing top . Never add music. I like the sounds your workshop sing.
A bit overkill but if you can do it better than its shame to do it less.
Thank you 😁
Nice Feedback 💪
Tip my hat to you, sir. Your artistry is impressive. Congratz!!
Thank you 😁
That is the best welding table attachment I’ve seen.
Thank you 😁
Your workmanship is impressive. The project turned out beautifully. Wish I had some of your tooling. That table is awesome. Thanks for sharing.
Thank you 😁
If you need to make a different box type, make another top piece for flaps. You end up with custom jigs and if you have the volume needs, this is awesome!!!
Great job Dirk! Thanks for sharing all you do. I learn a lot from every project you share.
This is absoluterly the best Sheet metal bender video I have ever seen. Some really nifty ideas and very skillfull fabrication. Love the modular adaptability.
Это гениально! Благодарю тебя за твой труд. Всех благ и процветания.
I bought a plan and have now fabricated my own metal bender. I couldn´t agree more to all positive feedback! The bender works very well and is really very flexible!! I did a small adjustment to #2 (Flat steel 100x10, lenght 820 mm) in the plan: I drilled two 13mm holes in lower left and right corners and I now can bolt #2 to a vertical support in the table if needed. This helped a lot not to overstress the weld between #2 and both #4´s when working with "too tough" material. Oh, by the way, you also inspired me to enhance my welding table to a totally new level.
Thanks for the tip. Just started fabricating mine. excited
@@albertjowd8482 Good luck! I wrote my comment a year ago and have been using my bender to soo much more than I thought of initially. I really like this tool and it´s design, it works superb for me!!
Just about to build a lightweight one, nice to see another hinge option.
Your editing style is one of the best DIY techniques I have seen. No filler.
Thanks!
Thank you 😁
Among many creations of bending machines on youtube this is the best!
This is the only one who answered my question about how to take into account different thicknesses of the sheets to be bent 👍
Genial.
Ich wünschte, ich könnte so gut mit dem Winkelschleifer umgehen dass ich ne Wasserwage auflegen kann. :D
Dankeschön 😁
Üben üben üben 😅
Du bist ja überhaupt nicht zu bremsen! Geniale Kantbank! 😍😃🤙🏻
Dankeschön 😁 hätte bloß mehr Zeit ich glaub es werden noch Jahre vergehen bis ich mal an den Punkt komme das überlegen muss was ich noch bauen könnte 😅
@@TheMetalist bau Dir ´n Kreuztisch für Deine Magnetbohrmaschine, dann kannst Du fräsen :), mit Deinem Drehteller könntest Du dann auch drehen
@@franckherrmannsen7903 uuhh glaub nicht das das gut funktioniert da die Maschinen ein leichtes Spiel hat und die Lager glaube nicht für für seitliche Belastung ausgelegt sind.
Denk für leichte Arbeiten in Holz oder Plastik könnte es funktionieren 😁
@@TheMetalist war ja auch eher ein Scherz, bei Deinem Faible für Qualität wandert da bestimmt ´mal was richtiges in die Werkstatt
This is the best I've seen made so far and clean.
um es wie Gunnery Sgt Hartman zu sagen: DAS DING KOMMT AUF MEINE LISTE! DAS MERK ICH MIR VOR!
Mega 😁💪👍
Great video, I envy your tools and equipment. Very handy brake.
Great overall design and build. It's built like a tank except for the barrel portion of the hinge, it looks like it's to thin. With all of the stress being focused on those two hinges it will be interesting to see if it holds together over time.
Thank you 😁
Yes will see how it turned out in the future.
You are an artist, a genius and a magician.
Thank you 😁
Excellent video. Very well edited. No wasted time watching repeated procedures.
And an excellent design. the way it can be used on the welding table, in a bench vice, on a work bench, or pulled out to permit Z bends.
Best on 1 I have seen yet.
Awesome 💪Thank you 😁
I think it would be cool to see you use flux core on your next project even if it isn't ideal. A lot of us poor guys get our start on flux core so it would be cool to see a pro make something with that process.
Ok...flux core is always a lot of mess😅 i like to use tig because i always never have to grind. Standard Mig will come more 😁
@@TheMetalist awsome!
That my friend is one wicked creation you have just built !!!
That table is awesome!
So is that brake! Nice work!
Thank you 😁
Best. Вот это я понимаю руки из правильного места растут! 👍🤝💪
Thank you 😁
Excellent design and build-Very well done ✅👍
Thank you 😁
Great design and I love that table.
Nice minimalistic design. Just what I need for small electronic cabinets.
Great job!
Thank you 😁
You are amazing and so ingenious. Keep it up, I look forward to seeing your next video.
Thank you 😁 will come 💪
I've watched a few self build sheet metal folders but this is by far the best!
I'll be trying to build one of these soon, thanks very much!
You have got yourself a new subscriber 😊👍
Awesome 👍 Thank you 😊
The BEST workbench I have ever seen!!!
A well thought out project- you are always thinking ahead. Great job.
Thank you 😁
That turned out so damn good, man!
Thank you 😁
*Impressive. Nice thing about this is you don't have to waste 20 sq ft of floor space for a separate sheet metal brake.*
Damn,You just made me want to put this tool in my lounge just to look at it....Best DIY-video I've ever seen.Oh,and thanks for not adding music.Grtz.
Lo tiene todo ! Práctica , funcional , cabe dónde la pongas . Excelente trabajo, felicidades!🇲🇽👍
Mate I wish I had the tools and skill to make firstly your welding table and then the rest of the stuff you make. Ingenious- Well done.
Your channel and awesome job just are inspiring to anyone who like metal work congratulations man by the way thanks for teaching us personally I appreciate it 🙏🙏
Awesome 💪 Thank you 😁
Man... you’re a good worker. Nice job
Thank you 😁
Diresta often shows the same process on every part... if he's cutting 40 pieces you see it 40 times.
This is much better.
Very well done.
Thank you 😁
Super, da geht das Schlosserherz auf 😀
Best brake I’ve seen on YT.
Thank you 😁
Nice project and impressive welding skills - thumb up
You are a EFFING GENIUS! How come you only have 155k???? Suppose to be 115 MILLION!
Im on the way 😁 ... thank you 😁
Классный станочек. Нужная вещь. Спасибо что делитесь с такими идеями.
Ingenious designs and execution on point👌
You're an inspiration to me for sure!! Time to get off this computer and back out to the shop!!
Awesome 💪
Love the table.. smart using hardware to secure different tools to your work surface. Gonna borrow that idea 💪🏼
Sure 😁 thank you
Impressive machining skills and welding skills, well done, a superb piece of art.
Awesome job ! Beat all around versatile bender !!
😅 Thank you 😁
You have amazing talent. You have a great channel to watch.
Thank you 😁
That is a superb little break. Very versatile. You should market them. Or maybe a kit to convert the harbor freight unit to something almost as useful. And Thank you for no obligatory metal thrash trash, I won’t even call it music.
so very versatile - nicely done
Thank you 😁
That is fantastic. Such clean work too!
Thank you 😁
Well thought out in the design to allow several working functions. Excellent job.
Thank you 😁
Engineering, design, and fabrication, at its VERY best.
Keep 'er lit Bro!
Thank you 😁
Super impressed mate, well done 👍🏻🇦🇺
Thank you 😁
I just found your channel, Your bender beats my Harbor Freight one by a Mile. Your Table is Sweet by the way. I like how you Fast Forward your Video Content but still get the Point Across with nice little close up shots. Great Job on Bender, Top Notch
Thank you 😁
@@TheMetalist how thick is your table? I want to purchase the plans to build this bender but don’t want it to damage my table when bending. Thank you for all of the great ideas/builds 👍
@@mikeschneider634 its 8mm
Very cool addition to the bench. I like the bench top back stop accessory and the finger slot brake accessory clamp bar. Very clever. I must build one!
Thank you 😁 awesome 👍
Man it is so much fun watching you work.
Thank you 🙂
that hammer that you made is just awesome to watch, you could do a complete video just banging on stuff and I'd happily watch the whole thing.
That's what she said
Ok will come 😅🤜🤚
Ty once again for your wisdom 😎🧙♂️,
🧙♂️😁
A melhor dobradeira manual que já vi obrigado.
Wow - such clever fabrication. I can only wish my mind would work like yours. Thanks for another incredibly inspiring video. 👍👍😎👍👍
Thank you 😁 👍
I've been looking for a bender that I can make and after watching a few videos, I found yours. Happy to buy your plans and make a bender for my aluminium fabrication projects. Love your channel, too...subscribed and looking forward to checking out your other videos.