How to Replace Engine Water Pump 2008-2016 Chevrolet Cruze
Вставка
- Опубліковано 9 тра 2022
- Buy Now!
New Engine Water Pump from 1AAuto.com 1aau.to/ia/1AEWP00201
This video shows you how to install an engine water pump on your 2008-2016 Chevrolet Cruze. The water pump keeps coolant flowing through your engine. Common failures of the water pump will leave the coolant leaking, or stagnant. Both will lead to overheating if left untreated. Install a new engineered to fit water pump from TRQ for total peace of mind.
This process should be similar on the following vehicles:
2011 Chevrolet Cruze
2012 Chevrolet Cruze
2013 Chevrolet Cruze
2014 Chevrolet Cruze
2015 Chevrolet Cruze
Tools you will need:
• Flat Blade Screwdriver 1aau.to/od/1AXAA00013
• Phillips Head Screwdriver 1aau.to/od/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 15mm Socket 1aau.to/od/1AXAA00015
• 19mm Socket 1aau.to/ob/1AXAA00043
• 7mm Socket 1aau.to/od/1AXAA00017
• Trim Tool Set 1aau.to/od/1AXXX00004
• Hose Clamp Pliers 1aau.to/ob/1AXAA00076
• E10 Socket
• E12 Inverted Torx Socket
• E14 Socket
• T20 Socket
• Ratchet 1aau.to/od/1AXAA00016
• Socket Extensions 1aau.to/od/1AXAA00015
• Torque Wrench 1aau.to/oc/1AXAA00044
• 15/16 Inch Wrench
• Block of Wood
• Brake Parts Cleaner
• Cloth Rags 1aau.to/ob/1AXSS00035
• Drain Pan 1aau.to/ob/1AXAA00320
• Floor Jack 1aau.to/ob/1AXAA00068
• Funnel 1aau.to/ob/1AXAA00310
• Pick 1aau.to/ob/1AXAA00037
• Razor Blade / Gasket Scraper 1aau.to/ob/1AXAA00280
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Heroic of you to make a very in-depth, no fluff, no omissions tutorial. Major props to you
I really appreciate you making this video. My local Chevy dealer was going to charge me $1400 for the pump and labor. I found the pump at Autozone for $90 and a new belt for $25. I still can't figure out how labor added another $1300+. I will be attempting to tackle this on my own.
I can't thank you enough for this very excellent tutorial video. The dealer wanted twelve hundred dollars to do this. Saved my daughter a lot of money. Thank you, again.
God this saved me a boat load of money, best tutorial I could find.
U r the best my guy u saved me alot of money and also made me mechanic 😂
Thank you! Seriously! I was stressing trying to find someone to help me and then decided to do it my own, read your comments, watched your video and loved it! Watched it again and took it step by step, but seriously thank you! Thank you Thank you THANK YOU🙏🏽🙏🏽🙏🏽 I Am Subscribed
What are the torque values for the engine mount? Do you need to use new torque to yield bolts for the engine mount? if so what are the part numbers for the 3 engine side attachment and the 5 other bolts an 1 nut on the wheel well side.
The Cruze only started in 2011. So any other car with this engine may have different mounting hardware, hoses and air box position.
Thanks for putting this together. Very through.
So thankful for this video!
Good Video. I like your Torque wrenches and your impacts 👍 Thanks for sharing.
Actually watch the video and did it my time thanks buddy save me alout of money
For future viewers:
This is the 1.4T EcoTec engine. When you perform this replacement, take the time to replace the accessory belt and tensioner. It is advised that you also replace the thermostat housing and water outlet with aftermarket aluminum versions, and change the internal thermostat in the housing with a lower-temp version - the replacement internal thermostat is found in the thermostat housing for a Cadillac ELR and a Chevy Volt 2011-2014, part number 55593035, manufactured by Dorman. The stock thermostat is rated to open at 220°F, the replacement is rated at 176°F.
Studies have shown that the engine operating temp has minimal effects on emissions and efficiency, so this change is not detrimental to the operation of the vehicle. It may be possible to increase oil life with this change, as the operating temperatures will be lower. It may also be possible to increase engine performance due to reduced cylinder temperatures and predetonation chance, as well as reducing the heat transfer from the radiator to the stock intercooler.
These changes will drastically improve the life of the 1.4T LUV engine by reducing operating temps and overheating conditions. The stock thermostat operates within 20°F of high-temp warnings from the coolant temperature sensors. Save yourself the potential failure by doing these upgrades.
And change the oil every 3000 miles! Tiny oil passages everywhere in this engine will get gummed up by old dirty oil. It only takes 4.25qt - that's just over a gallon - and it will deteriorate quickly because of the high heat, the turbo temperatures, and the small oil capacity. You will keep the engine healthy for hundreds of thousands of miles.
Thermostat replacement information courtesy of CruiseCruze over at CruzeTalk. Look for their thread on the replacement for more observational information.
What is the diameter of the hose used to drain the fluid from the radiator?
This is a really good time to upgrade the thermostat to the aluminum replacement and eliminating another fail prone plastic coolant part. All of the plastic coolant parts on the engine have affordable aluminum replacements. We had to do them all recently, as each of them had developed cracks and warping over the years. Nearing 80,000 miles, it was a great decision.
+@AraceaeFanatics Thanks for watching our video! 1aau.to/m/Shop-TRQ
Do you need to use gasket maker silicone in addition to the gasket?
My 2013's radiator valve is accessible from the top of the hood area. No need to remove the wheel and all of the plastic pieces. This job is nearly identical to replacing the alternator. Only messier, though due to the antifreeze
what size drain tube do you use to fit on the radiator petcock fitting?
Thanks!
My engine rattles more then it did now, any suggestions on that?
What would a person expect to pay an independent repair shop to do this repair?
Thank you so much for this. 🙏🏼
+@Nitro_Foundry Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
Thanks for the video! You dont have to drain the radiator fluid first?
That was the first thing he did 😂
Why did he take the lower covers off?
What is the best brand to go with for the water pump? 2012 Cruze and I’m overthinking it
Don’t you have to bleed the system after everything is changed ? Or is that an older model Cruze
What are the signs that the water pump and thermostat is bad?
A Freind of mines car is going thru a lot of coolant, but we don’t see any leaking on the ground. The oil doesn’t look milky.
So we are not sure where the water is going.
No gasket glue on the gasket
different engines offered, you should put displacement in title😢
Thanks!