1996 Ford Bronco Build MAF obII 460 and 1 Ton swap
Вставка
- Опубліковано 6 тра 2017
- My 96 Bronco Build. This build took 6 months to do. Mass air flow obII converted 460 using oem ford parts, dana 60 and ford sterling 10.25 swap using deaver 6" springs and James Duff arms, 4.88 gears and Detroit lockers front and back. 38x13.50 toyo m/t tires
- Авто та транспорт
That's the way they should have been done by the factory. Awesome job!
Looks great! Who doesn't love a classic bronco like that or k5 blazer lifted with nice wheels n tires it just looks rite! Sweet truck bud!👍
Great video and awesome bronco... The song drives me nuts though. Lol
Yea but it’s free to use.
Bad fucking music bro Jesus make u not wanna continue to watch
I admire and appreciate how well taking care this bronco is.
UA-cam Incorporation you don’t want to see it now. I do use it for what I built it for. But will be getting new paint soon.
Very inspiring motivator build. Dreams can come true.
Congratulations you have a solid capable Ford Bronco.
SUPER CLEAN BUILD!! Wow!! I wish I had the time/knowledge to do that to my 80 Bronco... Looks like a very capable trail rig.. Hats off to your hard work. KUDOS!!
You did a Fantastic Job Bro, I came from FSB. I'm still runing TTB with 33s. Good Stuff!!!
I absolutely love that paint color combination, got green EB myself
Wow what a great build! I’m so torn. Every time I watch this vid I wanna dump my project and restart wit a 460. Keep up the great work
Amazing build. I'm going 3/4 ton w the ttb out of a 250 and Carrick conversion.
Man that's a good looking Bronco brother.
Great build but it would have been a Great video if you walked us through with a voice over of what you did and why. Good Looking Bronco!!
Such a beautiful bronco props on the build
Them are some SWEEEET BRONK'S. Thank You Very Much for Sharing this Vid. CONGRATULATIONS👏 MY FORD BRONCO BROTHER. ONLY THE FEW & THE PROUD, THAT CAN ACTUALLY SAY YOU BUILT YOUR(BRONK) "BEAST" YOUR WAY. KEEP AIMING AT THEM CLOUD'S. FORD1TUFF"1ST" TO BE HERE(BUILT) & EVERY OTHER KEEEP'S BITTTING OFF THE BEST.
great job with the build, i enjoyed watching. I just swapped a 14 bolt under my bronco I will be posting a video soon. Keep it up.
Nice video.
Except for the That Drone note .
Wow, beautiful Bronco !
Nice work. Well done!
BEAUTIFUL!!!!!!....PROYECT LOVE.
VERY NICE
I love it...I'll be doing something similar but i'll keep the small block 5.8.
I'm running pretty much the same set up on my 88 bronco. I do think have the psc. I've been leaning towards a 12v Cummins swap. for now I'm running a 408windsor and np435 trani. love the low 1st gear.
That is F%^*(ng BEAUTIFUL!! Nicely done...
Very nice! Beautiful rig!
That's so nice. I've been toying with putting 1 tons under my 96. This gave me all sorts of other expensive ideas. Would almost be easier to cut a OBS truck short and stick a bronco shell on it lol.
solid rig well done
Great work!
Sweet build man. I bet the 460 is a big improvement over the small blocks. Pass everything but a gas station. Lol
To bad you couldnt have kept the polished wheels they looked so much better to me.
OMG the best lookin bronco i ever see, ah shit is my dream truck
Awesome video bro!!!
You did perfect with this build. Absolutely beautiful 👍. Very jealous
Nice Bronco.
thats one bad ass Bronco but I'd be afraid of a dirt road Cause it's too nice!
Sweet Rig
Beautiful
Ford didn't get it right. You did. Nicely done. What did you use for the Automatic transmission.
I'm just making a guess on the cost to build without your labor just parts and materials only .. S omewhere around the 10k to 12k mark.. . You did a very outstanding job..
US4FREEDOM 0U812 In this vid I had a e4od in it but now have a zf5 speed swapped in. Cost guess is pretty close in this video but now am over the 20k mark. I have spent another 8-10k on parts since this video and plan to spend another 8-10k in the next 2 years
You and I have twin broncos....with the exception of the big block and that awesome front bumper. It looks like they are unavailable. Could you forward some dimensions so I can fab one? I'm also on FSB
Sweet build! Going that route for my wife's bronco as far as the axles, thinking about doing the maf conversion and a 460, as the 94 351 I have is sd sadly.
Christopher Robinson Even a fresh sd 460 is a huge improvement for a fullsize bronco.
Honestly I'm somewhat ignorant to it all in a way as I've only read about sd issues with upgrading parts and what not.
good job (y)
Dam nice.
chingon
Where did u buy that radiator?? Need one of those for my 93 bronco.
Sweet buold, where did you get the brake lines for the rearend?
Awesome truck where did you get the kit to install the rears?
So wait... did the sterling just bolt up? I see you have some wedges in there between the axle and the leafs, to correct then pinion angle right? I have 1996 Bronco, and I'm toying with the idea of doing the SAS up front, and a sterling 10.5 out back. How much welding is involved? I don't have a welder, or enough experience to weld on axles and suspension. Awesome build!
Muy buena
How difficult was the MAF swap? I wanna do the same to my 302
Where did you get the beefy front bumper? Love it. One of the nicest broncos i've seen period.
Jeff Flick Thanks. It was made by Hefty Fab but he doesn’t make them anymore.
Awesome build! Do you happen to have a blog or something I could read the specifics on?
nicholas ruiz Some of it is on Fullsizebronco.com but haven’t been on there in awhile.
How much did the eje move from the frote ?
Each Size cide?
Like being on hold w/ATT
Bellissimo 👍💪💪💪😉
Which front bumper is that? You and I have twins for trucks.
where did you get the white door trim on the white bronco?
What size wheels and tires were on it in the beginning? Im getting one and I love that setup!
matthew smith When I got it, it was on 35” bfg a/ts on 15x10 procomp wheels. Then went to 37” claws on 16x10 procomp wheels. Then 37” toyo m/t on 17x9 Mickey Thomason wheels and then 38” toyos on M/T wheels. Now it has 41.5 pitbull rockers on ATX slabs(no public pics yet)
Where’d you get that front bumper
What all did it take to get that rear end in
@Dustyn’s Fergie Fab, What paint and primer did you use to paint your axles?
Its just rustoleum professional. No primer. Holds up good and looks good.
Dustyn's Fergie Fab Are you still actively on FSB? Wanted to ask you or Bronco Logic a question about the hood louvers on his truck. The reason I’m telling you is because I know you guys both worked on your rigs together. Let me know if I should pm you on FSB instead.
Mike, I haven’t been on in months. Bronco Logic has a UA-cam channel and Instagram. You can DM him at either one.
Dustyn's Fergie Fab when you had the TTB lift and added 37s did you have to add a body lift or trim the fenders? I purchased a 6” Superlift kit with extended radius arms and I’m wondering whether I should move the axle 1” forward like some members did on the forum to center the front wheel away from the front fender. I would rather not just to keep the spring more centered but I want your opinion. My rig will be dual-purpose daily driver and a weekend trail rig here for the Florida mud and woodland trails.
Mike : With the wheels I had they cleared fine with the 6” rough country lift other than my stock bumper had a 1” spacer “ I didn’t know till I took it off”. My 37” claws ran small so different tires may rub some. With a ttb lift you can’t move the axle forward.
@13:17 Damn, wish my wife would flex like that....
I just bought a 94 e350 for a donor for my 78 Bronco. I just want to keep the motor stock. Is it worth switching to maf? I was planning on buying all the sensors and actuators new again to “rebuild” the efi system. I live in Alaska and just need a rig I can depend on.
If your staying stock, finding the MAF parts to me isn’t worth it. The efi 460s are really dependable and should give you no trouble.
Did those leaf spring fit right into place of your old ones
Yes
How did you do the rear driveline up to the sterling 10.25 axle
dan cain You have a lot of options. It all depends on the yoke you have on the 10.25 really. If yours has a 1350 yoke all you have to do is take the flat flange off the stock driveshaft and if you have 6” of lift it should fit. I have a custom driveshaft because I run a Superduty flat flange with a 1410 joint and a 1350 CV shaft. I also have my stock shaft with a Yukon 1350/1410 conversion joint as a spare.
Where did you get them bumper mods
how much did it cost bc my dad bought one and is looking for what to put on it
TK slimjim I have over 15k in parts in this video and have spent another 7-8k since and plan to spend at least 6-8k in the future. Nice parts add up fast.
Hey man if really appreciate it if you could tell me the exact color of your bronc, im looking to get mine painted and i love that color 👌👌👌👌
THE BLUE OVAL 302 Paint code is KM.
Dustyn's Fergie Fab thanks man 👌
whats the backspacing on those rims
did I meet you at Windrock for RITS 17? I have the red one on 35s
Yes
What was the approximate cost of this project?
Where do you get that rear bumper ?
IK broncoair makes a similar one.
How much would one of these go for on the open market? I want to know how much to save up! 😁
I'm guessing around $15k-$20k
gwh21375 Well stock mine would go for about 15k. But your pretty close. The white one on my channel is about to go up for sale I think. It will be in the 15-20k asking range. I wouldn’t let mine go for less than 25k at least. Been offered 20k and said no.
Could I have the paint code for that amazing blue?
NBviper 6023 Paint code is KM. Only offered in 96
What’s the color code of blue is that
How much would it cost to do this to the same truck?
In this video I think I had about 15k in to it. I’m pushing 25k now and plan to spend another 10-12k on it and should be done then.
A picture says a thousand words. But a video shows a thousand pictures. Where is the video? Sound?
Do you still own the bronco ?
Dustin does Michael still have his white one
Yes, I will do a update walk around vid soon on it. It's coming back for some more upgrades. He doesn't plan on getting rid of it, that's his "crawler" bronco. We are building him another bronco for camping/weekend cruiser.
Dustyn's Fergie Fab Cool man I watch all of y'all videos I am y'all biggest fans no one else out there does what you all can do y'all have the most bad ass broncos
What kinda gas mileage those things get?
maxthereof bad and worse. Lol
bigdaddy6879, I know 😉. It's called smiles per gallon. The 460 is the worst.
maxthereof yes sir. I have an 89. Hopefully one day mine can look as good as this one. I have a few steering column issues and an alignment to worry about first. Haha
10-15
Is that the oj Simpson bronco
Why is it blue
Loose the obnoxious music!!!!