I worked at Kennedy Tank and Manufacturing in Indianapolis, Indiana in Engineering. I ordered heads and parts for pressure vessels but never seen this operation, Thanks.
What did that guy throw on there at 2:13 that looked like a pizza? Is it some kind of mold release agent that mostly burns away to leave a greasy soot? I would think you wouldn't want the extra carbon but maybe that's the purpose?
I've been involved in a lot of engineering projects but that takes the cake.Imagine someone coming up with the idea and it not working after all the investment.Well done
Why did the guy throw a piece of wood in at 2:13? It immediately burst into flames. The charred remains can be seen when the bowl is removed at the end.
That's exactly what it's for. The wood turns to carbon and prevents the inner die from sticking to the part or otherwise being marred by the workpiece. Same with the oil they use- turns to carbon and becomes a non stick coating.
Sideslip - it also inhibits scale formation. The burning wood consumes all the oxygen near the metal. Did you notice the scale removal just before the guy threw in the chunk of wood?
This compared to press forming is very energy inefficient, you run a heat oven plus a press. Rather than just a hydro press. And it seems you can only run one size diameter at a time based on the press.
@@JoeKyser That's is not a wok but the dish end of a cylindrical vessel normally seen in Pressure vessels or Petroleum tankers. It is later welded on both ends of the hollow cylinder to form the vessel.
The end of a pressure vessel (to store pressurised gases) . They would make another one then weld to each end of a steel cylinder. Much stronger than having flat ends welded onto a cylinder
steelhemisphere.com/product-showcase/elliptical-head/ Shandong Precision Metal Products Co., Ltd is a company specializing in the manufacture and sale of steel hemisphere, the company main Products are: dished only head, flat heads, dished and flanged heads, half sphere, conical heads, etc., our Products are exported to the United States, UK, France, Australia, and many other European and American countries. As the world's largest steel hemisphere manufacturer, for sale, supplier, wholesaler,, we have a complete set of production system and after-sales service system.
I worked at Kennedy Tank and Manufacturing in Indianapolis, Indiana in Engineering. I ordered heads and parts for pressure vessels but never seen this operation, Thanks.
hi, we are tank head manufacture in China--www.chinabizmall.com, you can make your order by email to linda.chow@chinabizmall.com
I was half expecting them to throw in some pork and rice 🤣
hydraulic press channel needs a press like this
This looks like a nice new clean shop to work in
That could probably crack a whole bag of walnuts at once.
Or fry a cow
What did that guy throw on there at 2:13 that looked like a pizza? Is it some kind of mold release agent that mostly burns away to leave a greasy soot? I would think you wouldn't want the extra carbon but maybe that's the purpose?
The press channel got nothing on that beast
macgyver15147 ve must deeeel vit it!
Don't tell anyone, but I didn't have my earplugs in when I watched this!
I've been involved in a lot of engineering projects but that takes the cake.Imagine someone coming up with the idea and it not working after all the investment.Well done
Michael Egan hi
Michael Egan a lot of engineering and that blew your hair back? Pfft..l
Michael Egan fully agree sir..I have been there :-)
an engineer would know that this has been engineered to work
it is quite easy to simulate the forge deformation with a software, so that can't not work
is that the boss of all Hydraulic press machine?
They have about a dozen presses. That looks like one of the smaller ones, maybe 300T at a guess.
I want that job to just point and click the trigger of a temp gun all day.
Why not using the metal spinning？it's too complicated for the using press
Why did the guy throw a piece of wood in at 2:13? It immediately burst into flames. The charred remains can be seen when the bowl is removed at the end.
I had the same question. Maybe it's for releasing the press head after forming.
That's exactly what it's for. The wood turns to carbon and prevents the inner die from sticking to the part or otherwise being marred by the workpiece. Same with the oil they use- turns to carbon and becomes a non stick coating.
Sideslip - it also inhibits scale formation. The burning wood consumes all the oxygen near the metal. Did you notice the scale removal just before the guy threw in the chunk of wood?
smart guys here
asking the important question right her
I want to know why almost 130 people dislike the video. Just curious.
it is very nice job
It’s a bird bath for an ostrich.
This compared to press forming is very energy inefficient, you run a heat oven plus a press. Rather than just a hydro press. And it seems you can only run one size diameter at a time based on the press.
Joshua the difference is tempering in the steel so you're comparing the processes of two completely different finish products
Y esa cacerolita es para haser los frijolitos ?
Why didn't you show the finishing steps?
Looks like the top or bottom of a pressure vessel.
agreed
turn the cap 90 degrees and put it on the 2 sides
It's the new giant wok for sale on Amazon
jesse iwamoto "Holds heat well, real bitch to move around."
Comes with the Chinese cook book '101 ways to wok your dog'.
yo thats funny as hell, i was thinking the same thing. what are they making a huge wok?
jesse iwamoto...and, don't forget...FREE shipping!
@@JoeKyser That's is not a wok but the dish end of a cylindrical vessel normally seen in Pressure vessels or Petroleum tankers. It is later welded on both ends of the hollow cylinder to form the vessel.
Which country
thats wild
Soon after a new Panda Express opens.
Once again I'm lost on UA-cam...
Location this aria
700th sub. Awesome work!
انا من مصر لدينا تصنيع قيعان حديد واستنلس
It would be real cool to see to tomahawk steaks cooking right there
what is purpose of this dish?
The end of a pressure vessel (to store pressurised gases) . They would make another one then weld to each end of a steel cylinder. Much stronger than having flat ends welded onto a cylinder
I want one of those.
What temp are the blanks at to press
I think cherry red steel is equivalent to 800 degrees Celsius.
Jag tror att körsbärsrött stål motsvarar 800 grader Celsius.
Touch it Touch it.If 1 of those guys do touch🤦🏼♂️.I would be a perfect dumbass canidate to do so🤣
why make it on fire, we do not make it like this
I'm looking for hemisphere hot forming 5no's size 1300 radius any without joint in single peace
Who eats in this giant bowl.
sumo wrestler rice bowl
Your mom!
Nice
We use those, for the end caps, for tube and shell, Heat exchangers.
epileptic cameraman?? fukin brutal
Cool
👍
Só botar o ovo e pronto!
Noodle bowl
Facts Wtf🤔😮🍲🤣
I guess some people just can't hold a fucking camera still.
Pacific Rim 2 brought me here
C
steelhemisphere.com/product-showcase/elliptical-head/ Shandong Precision Metal Products Co., Ltd is a company specializing in the manufacture and sale of steel hemisphere, the company main Products are: dished only head, flat heads, dished and flanged heads, half sphere, conical heads, etc., our Products are exported to the United States, UK, France, Australia, and many other European and American countries. As the world's largest steel hemisphere manufacturer, for sale, supplier, wholesaler,, we have a complete set of production system and after-sales service system.
thats what the demos would like to do to TRUMP
That was amazing.