I thought you guys were singing Lonely Island.. Step 1 Cut a hole in the box Step 2 Put your junk in that box Step 3 Make her open the box And that's the way you do it...
These two are hilarious they’re worried about the tank blowing up what you want and she’s worried about him wearing a face mask they’re hilarious as hell I absolutely love watching them
Super! Your videos get better every week, love Crossley build. Going to purchase Cory's box opener now!😉. Get him to take you out for dinner Hannah...Take care from the UK.
👍Great Content and Video 👍Thanx for Sharing your thoughts and ideas for your Rat Rod, I'm new to this Channel, I've been watching Cory and Hannah, just subscribed , keep up with all of the great work 👍 Have a Great Day 👍 God Bless America 🇺🇸🙏🇺🇸 Did see you at Pigeon couple of weeks ago, but you were busy, maybe next time 😊😊
The collaboration on the projects is like being married take a little give a little and in the end all is good just like this video be careful and stay safe my friends God love ya both.
Derek from ViseGrip Garage has a mixture he makes up himself for the Patina on his vehicles! I don’t know the mixture but it seems to work pretty good! Y’all know what looks cool, square key stock heated and twisted! It’s a old conveyor chain, Hannah is right! I think the propane tank is going to look good you guys! I thought y’all had a plasma torch, would be faster since it’s open now! Hannah, hand paint “Propane “ on the side of the tank! That might look pretty cool! That’s a good idea to cut it in half and reconnect it the size you want! Fabrication means you can do what you want, just cut it and weld it! I’ll be back next Tuesday my friends, thanks for sharing Hannah and Corey! Kirk from Louisiana, sending prayers for you and your families! 🙏🏻🙏🏻🙏🏻👌🏻👌🏻👌🏻🤙🏻🤙🏻🤙🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Good choice on the chains!! They are the drag chains from a manure spreader. So clean your hands good after handling them!!! I used them as fuel tank straps on my ratrod. Keep up the great work, because I'm digging it!!!!
I've been fortunate enough to be on this great planet over 3/4 of a Century, and I said all that so maybe everyone will understand the impact that the "First" of Cory opening boxes with a grinder had on me!!! That's most definitely a First for me. And at my age!?!?!?!? "Firsts" are few and far between. I'm still ROTFLMAO about Cory opening boxes with the grinder! Thank you both for all the smiles you bring!! Please keep the great videos coming.
You entertained today! I wondered if the seats would even fit with the full sized tank in there. Just remember, a lot of what you do is trial and error. Thak you two for being honest! Eddie
link belt with the cross bars is used in a farm manure spreader the wheels or PTO powers the belt that moves the contents of the spreader to the back . Long ago in a place far away, I was a teen who worked on my Granddads dairy farm. Got to fix links too many times!
Hey Cory and Hannah, this is GunzNButter86 from Massachusetts.. I've been subscribed and watching your channel for almost a year now and absolutely Love the content that you put out, and wish I had the money to have you build me a sweet truck like Hannah's!!!!!!! Or one of the many other older truck body put onto a newer chassis and slammed with a 12 valve!!!!!! But I found your channel from watching Puddins Fab Shop, which I've been subscribed and watching him for a few years now... But he's always supporting the Sweet Patina products, cause he uses them all of the time!!!! And I'm not sure if you've seen any of his videos or met him at any events cause he lives in Pot County Oklahoma..... Lol but I just figured I'd try and interest you in checking out his channel and honestly I'd Love to see a combined build with you and him!!!! Cause he has an old International Semi truck/front part of the chassis with cab and running motor. Called "Wheel Hop Wilma" which he has some sweet rims and tires for it already, but I think that you and him could make it an Unbelievable Slammed Semi with 5th wheel for towing some of Puddins creations, like his Chevy station wagon that he's building rite now and a few of his Custom Box trucks!!!!! But again keep doing what you're doing cause I love the channel and wait for every Wednesday so I can see a new video from you!!!!!!!
That chain came out of a spreader, probably a manure spreader. The chain pulls the slats which move the manure to some paddles that spin and fling it out in a field.
I really like your box opener it's really not safe i guess you really need to know what you are doing with it please just be safe okay can I make a suggestion for your welding hood you should try a gold lens it really. Helps protect your eyes from the arc welding rays just try it i always use them thanks Charles
Love love the work you guys do and that Hannah helper you got man bro ur one lucky man to have your girl help you out all the time excellent for sure,me and my girl watch u guy from way up in ,little town of 600 people maybe 😎
How fast will that diesel go through ten gallons? Hannah, the stuff inside the door is a tar based sound deadener spray material. I love the can idea for the transmission tunnel. Better to be unique than doing the same old stuff.
This is Keith suggestion for photographic purposes install a spring base old cb radio antenna to the trailer hitch to give the mouse its tail use the really tall antenna it would make a good photo
HELLO CORY & HANNA, I love the mouse trap grate job with it. 1st off would you sale it and if so, how much? 2nd thing your 41-dodge power wagon what Chassie are you setting it on? I'm looking at a 47-dodge power wagon myself. Hanna where were you when i was building cars in my younger years? plus I owned my owe welding shop for 30 plus year and grew up welding with my father from a young age. you two take care ang keep up the good work. the Cali kid.
The driveshaft tunnel needs to be secure to protect you if it fails your sitting beside it a lot better than thin gas cans . But secure it really good and Hannah got to keep your hair away from the spinning driveshaft
Oh my bad let’s not worry about the extension cord which is going to be wet as soon as he cuts into it and it sprays him in the grinder and on top of it is using a cutting wheel gotta love it
Pest control people use what looks like an Asedelin bottle which would be a lot skinnier and look fantastic and you could put your poison stickers you can order online on that. Mouse Trape looks cool I can't wait to see it done.
you could have used the propane tank still without narrowing it... I wish to have suggested to lay it in place as you had it, measure up about 8 or so inches on both sides, and cut the sides front to back. turn the pieces around to create a cove, or switch the left side to right, and the right side to left? I think when you narrowed the tank, it would have still looked good in there, but Hope your new plan works out. Thanks for taking the time to read this?
I just noticed when Hannah was welding with the mug she was pull wasn’t sure if she new you push with a mug and pull with an arc,she made a comment did you think I was going to push and I wasn’t sure is she was just fuckn around or not,
Hey guys, good to see y’all! A temporary brace Corey, cool brother! I like those rear tires Hannah, that’s going to look really cool! Throw a couple gussets on each side of the receiver tubing on the inside! lol 😂 Corey, at least you have some good help, Hannah can handle it! You’ll get better the more you do it Hannah, just takes some practice and Corey should set you up with some scraps to practice girl! I don’t see reason why you can’t get good at welding Hannah! Hannah, buy that man a box cutter ! I had a small box cutter that hung on my belt a while back, so I always had it on me!
I would recommend making a couple of drive shaft hoops to protect you guys in case you snap a drive shaft or u joint and that thing starts swinging around in between you two.
I love your videos man you guys are doing exactly what I want to learn. I’m cringing watching Cory cut that tank not for the worry’s of blowing up but the fact he’s using a grinder that’s plugged in and the tank is filled with water lol good thing he didn’t get zapped.
It all looks good and maybe you should try a old oxygen bottle and can't wait to see what you do next and good luck and be safe and God bless you guys and see you next Wednesday
After watching Cory opening boxes with a grinder, you need to change the shirts from safety third to "Check your safety at the door"
Absolutely my favorite Hannah quote “Is that a poop tank why is the water brown” 🤣🤣🤣🤣🤣
😂
Cory it's a manure spreader chain that pushes the manure out the back ff the spreader
My favorite You Tube channel! You 2 are so real. I like that you work things out together and don't act like you know everything.
Love you guys! Hannah your comebacks make me howl... Haha😅 who woulda thought..
Cory you're going to have to take Hannah to a really nice dinner. Not every wife would hang out in the garage and help build these cars..
I love to see the clips at the end. It's cool to see you doing things other than
doing cars. You guys are awesome !
I love it when you two hit the scrap yard. It’s like heaven for y’all.
As anyone mentioned…. Invest in a bead roller. Even simple straight beads would add dimension.
Great idea with the tank but you need oxygen acetylene tank it’s looking very good Hannah and Cory
Love these guys, so grateful I dmfound this awesome channel!!!
I enjoy your videos . Most entertaining thing I’ve seen all week. Keep up the great work.
Thank you !!
Had Safety Training at work Company wasn't Excited About my Safety Third shirt. Good video Keep them coming
🤣 "If it's not fine, we'll be the first to know....."
Puddin swears by the Sweet patina , especially those hand wipes.
You two keep us entertained!!
Great Video.. Y'all are amazingly fun to with with it. Love every minute...
I thought you guys were singing Lonely Island..
Step 1
Cut a hole in the box
Step 2
Put your junk in that box
Step 3
Make her open the box
And that's the way you do it...
Corey I don’t know what the bucket and a mop song is about but that was hilarious because Corey didn’t even know Hanna was videotaping.
I know I've gained wait,OMG I really laughed out loud ,she's so funny.
These two are hilarious they’re worried about the tank blowing up what you want and she’s worried about him wearing a face mask they’re hilarious as hell I absolutely love watching them
Super! Your videos get better every week, love Crossley build. Going to purchase Cory's box opener now!😉. Get him to take you out for dinner Hannah...Take care from the UK.
👍Great Content and Video 👍Thanx for Sharing your thoughts and ideas for your Rat Rod, I'm new to this Channel, I've been watching Cory and Hannah, just subscribed , keep up with all of the great work 👍
Have a Great Day 👍
God Bless America 🇺🇸🙏🇺🇸
Did see you at Pigeon couple of weeks ago, but you were busy, maybe next time 😊😊
The collaboration on the projects is like being married take a little give a little and in the end all is good just like this video be careful and stay safe my friends God love ya both.
One piece at a time, getting closer. Looking really good!
Love the sweet patina that's a great find
Very cool
Good call on the shield Hanah.
Derek from ViseGrip Garage has a mixture he makes up himself for the Patina on his vehicles! I don’t know the mixture but it seems to work pretty good! Y’all know what looks cool, square key stock heated and twisted! It’s a old conveyor chain, Hannah is right! I think the propane tank is going to look good you guys! I thought y’all had a plasma torch, would be faster since it’s open now! Hannah, hand paint “Propane “ on the side of the tank! That might look pretty cool! That’s a good idea to cut it in half and reconnect it the size you want! Fabrication means you can do what you want, just cut it and weld it! I’ll be back next Tuesday my friends, thanks for sharing Hannah and Corey! Kirk from Louisiana, sending prayers for you and your families! 🙏🏻🙏🏻🙏🏻👌🏻👌🏻👌🏻🤙🏻🤙🏻🤙🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
The chain is off a manure spreader , you clean out barn stalls. And then spread it on the field via the chain cleaning bottom of the spreader.
I love your videos whether you get much done or not.
Great job looking great love your videos keep it going thank you
😂😂😂😂 Hanna you’re close but it’s a Manure spreader chain that moves the manure back in the wagon to the back. Great job guys keep it up
Great job guys 👍👏 keep it up 👍 from Alabama 🇺🇸 watching 👍
That Sweet Patina Oil is legit! Can't wait to see you try it on Hannah's truck...sweet!
Good choice on the chains!! They are the drag chains from a manure spreader. So clean your hands good after handling them!!! I used them as fuel tank straps on my ratrod. Keep up the great work, because I'm digging it!!!!
You sold me ! Going to buy this for my farm truck . Thanks! 😊
I've been fortunate enough to be on this great planet over 3/4 of a Century, and I said all that so maybe everyone will understand the impact that the "First" of Cory opening boxes with a grinder had on me!!! That's most definitely a First for me. And at my age!?!?!?!? "Firsts" are few and far between. I'm still ROTFLMAO about Cory opening boxes with the grinder! Thank you both for all the smiles you bring!! Please keep the great videos coming.
Looking awesome guys
I've been using my angle grinder wrong apparently!😁
When your building something without a blueprint it's trial and error sometimes it works sometimes you redesign trial and error
The mix is boiled Linseed oil with odorless mineral spirits or just cheap paint thinner.
Good job on the shield 🛡 hannah.
I wish I could say I never opened a box like that. Done it to many times though. Keep up the work you guys.
The shellshocked thumbnail 😂🙏
You entertained today! I wondered if the seats would even fit with the full sized tank in there. Just remember, a lot of what you do is trial and error. Thak you two for being honest! Eddie
Love y’all’s channel
If you can check around in some of the oxygen and acetylene stores they have old tanks there they can't certify that's much smaller and rounder
The shield was a great idea to block getting electrocuted from the water leaking onto the electric grinder 😂😂😂
link belt with the cross bars is used in a farm manure spreader the wheels or PTO powers the belt that moves the contents of the spreader to the back . Long ago in a place far away, I was a teen who worked on my Granddads dairy farm. Got to fix links too many times!
Hey Cory and Hannah, this is GunzNButter86 from Massachusetts.. I've been subscribed and watching your channel for almost a year now and absolutely Love the content that you put out, and wish I had the money to have you build me a sweet truck like Hannah's!!!!!!! Or one of the many other older truck body put onto a newer chassis and slammed with a 12 valve!!!!!! But I found your channel from watching Puddins Fab Shop, which I've been subscribed and watching him for a few years now... But he's always supporting the Sweet Patina products, cause he uses them all of the time!!!! And I'm not sure if you've seen any of his videos or met him at any events cause he lives in Pot County Oklahoma..... Lol but I just figured I'd try and interest you in checking out his channel and honestly I'd Love to see a combined build with you and him!!!! Cause he has an old International Semi truck/front part of the chassis with cab and running motor. Called "Wheel Hop Wilma" which he has some sweet rims and tires for it already, but I think that you and him could make it an Unbelievable Slammed Semi with 5th wheel for towing some of Puddins creations, like his Chevy station wagon that he's building rite now and a few of his Custom Box trucks!!!!! But again keep doing what you're doing cause I love the channel and wait for every Wednesday so I can see a new video from you!!!!!!!
Puddin be happy lol
That dog is precious!!!
Awesome morning yall just laying down going to sleep from work awesome adventure as always yall have an awesome day kids !!!!!
That chain came out of a spreader, probably a manure spreader. The chain pulls the slats which move the manure to some paddles that spin and fling it out in a field.
🤔 Looks like chain and slats off of a manure spreader wagon. Perfect for the poop water tank. 😁
I really like your box opener it's really not safe i guess you really need to know what you are doing with it please just be safe okay can I make a suggestion for your welding hood you should try a gold lens it really. Helps protect your eyes from the arc welding rays just try it i always use them thanks Charles
Love love the work you guys do and that Hannah helper you got man bro ur one lucky man to have your girl help you out all the time excellent for sure,me and my girl watch u guy from way up in ,little town of 600 people maybe 😎
Looks like a old hey conveyer
How fast will that diesel go through ten gallons?
Hannah, the stuff inside the door is a tar based sound deadener spray material. I love the can idea for the transmission tunnel. Better to be unique than doing the same old stuff.
This is Keith suggestion for photographic purposes install a spring base old cb radio antenna to the trailer hitch to give the mouse its tail use the really tall antenna it would make a good photo
HELLO CORY & HANNA, I love the mouse trap grate job with it. 1st off would you sale it and if so, how much? 2nd thing your 41-dodge power wagon what Chassie are you setting it on? I'm looking at a 47-dodge power wagon myself. Hanna where were you when i was building cars in my younger years? plus I owned my owe welding shop for 30 plus year and grew up welding with my father from a young age. you two take care ang keep up the good work. the Cali kid.
The driveshaft tunnel needs to be secure to protect you if it fails your sitting beside it a lot better than thin gas cans . But secure it really good and Hannah got to keep your hair away from the spinning driveshaft
Love the channel. You can ratchet straps out slow just like you ratchet them in. 👍🏻
Oh my bad let’s not worry about the extension cord which is going to be wet as soon as he cuts into it and it sprays him in the grinder and on top of it is using a cutting wheel gotta love it
I'm glad to see other folks doing the ol'trail& error thing😊. What size hiems are those in the pan hard bar?
I totally go to fairs just for funnel cakes lol
That a pressure tank from a water well. 😂
Pest control people use what looks like an Asedelin bottle which would be a lot skinnier and look fantastic and you could put your poison stickers you can order online on that. Mouse Trape looks cool I can't wait to see it done.
I tell you that is my favorite build of the year so far...
Cory is like a kid on Christmas morning!!! :)🛻.....OH Shiny Things!!..What were we doing??...lol...you 2 are awesome!
Need to invest in a plasma cutter! Love the builds! Mouse trap needs cup holders lol
Lovin' it guys, keep up the good work 👍🇺🇸🤘🔥🔥🔥
you could have used the propane tank still without narrowing it... I wish to have suggested to lay it in place as you had it, measure up about 8 or so inches on both sides, and cut the sides front to back. turn the pieces around to create a cove, or switch the left side to right, and the right side to left?
I think when you narrowed the tank, it would have still looked good in there, but Hope your new plan works out.
Thanks for taking the time to read this?
Boy that sure is a nice looking fire truck 😊
cut the bottom of the tank at the halfway mark, swap the bottom sides to make the lower half concave. More room, still a cool top.
You guys spot on,use imagination for the fit God Bless,❤Jim
You guys could do with a bead roller, to put some rigidity and vibration damping into those big panels you're making.
I have couple of cans if you need them you are more than welcome to them if you want them…..good job love trap
Awsome looks great with body back on
I just noticed when Hannah was welding with the mug she was pull wasn’t sure if she new you push with a mug and pull with an arc,she made a comment did you think I was going to push and I wasn’t sure is she was just fuckn around or not,
Pretty sure that chain link is off of a conveyor for hay bales. Used a lot on Amish farms.
Quick question…. Do you park the “Farm Truck” out of the way so the fork lift won’t hit it? 😂
Well it’s safe over there lol I sold the fork lift 🤪
@@corywheatcustoms LOL!!!
Lovin it y'all!
I remember back in the day we used to use kerosene to do that,on old paint.
You ALWAYS 'push a mig! The gas HAS to go in front of the weld!!
That chain is out of throat of combine pulls the grain up into the machine 😮
Looks great yall
That is wide center will you seats fit in ?
Is awesome build a car custom and good concept😊
Hey guys, good to see y’all! A temporary brace Corey, cool brother! I like those rear tires Hannah, that’s going to look really cool! Throw a couple gussets on each side of the receiver tubing on the inside! lol 😂 Corey, at least you have some good help, Hannah can handle it! You’ll get better the more you do it Hannah, just takes some practice and Corey should set you up with some scraps to practice girl! I don’t see reason why you can’t get good at welding Hannah! Hannah, buy that man a box cutter ! I had a small box cutter that hung on my belt a while back, so I always had it on me!
Three or 4 inches of metal straight up off of the floor and half of your propane tank here you still have the propane tank look and half the size
It is from a grain lift to unload the truck. It is like a conveyer
It's at the bottom of manure. That's what move the manure from the front to back of spreader
I would recommend making a couple of drive shaft hoops to protect you guys in case you snap a drive shaft or u joint and that thing starts swinging around in between you two.
That’s the plan 🤘🏼
I love your videos man you guys are doing exactly what I want to learn. I’m cringing watching Cory cut that tank not for the worry’s of blowing up but the fact he’s using a grinder that’s plugged in and the tank is filled with water lol good thing he didn’t get zapped.
Make a little shelf in there for your stuff so you can put phone sunglasses 🕶️ and stuff like that 🤔😎🤪😂😂🙏🍻🍻
Like what ur doing with mouse trapcant wait to see when it done
When you are washing the motor and transmission spray oven cleaner on it let it set 30-40 minutes rinse it off it works
It all looks good and maybe you should try a old oxygen bottle and can't wait to see what you do next and good luck and be safe and God bless you guys and see you next Wednesday
Don't cut the gas cans! You'll always want them back!
I JUST LUV U KID'S.