Thanks man 🙏😀. I don't think I'll be supercharging the G anytime soon, if plans go the way I want in the next year or so, I'll be getting another car to replace the G. Now the Z is a for ever car so I'll definitely be boosting it sometime in the near future 😆.
I tried FI flex plate and LOJ with Arp bolts and red loctite torqued to 95ft-lbs still came loose. I ended up adding the OEM metal bolts plate and tack weld the bolts😅 Hope it will hold 🤞
U should get pedal commander makes the biggest difference out of all my mods trust me. It opens the the throttle wide open alot quicker and regular acceleration with less effort. Great throttle response and makes even my 7at fun again
Yeah man I have one on my G, I also had one on my 370z, but unfortunately the one on the Z started giving me problems and made the car throw a CEL and put it into limp mode too. Had to throw that one away, for that reason I removed the two videos I had about the Pedal Commander, I couldn't continue advertising knowing the issue it causes. What's weird is that the one on my G has been perfect, so go figure LOL.
Thats cool, i have the vr30 7AT in my 370z and also put in the LOJ plate. Did you ever tune/re-tune your car solely for the new transmission? Do you think there would be a benefit in that?
@@Mrgamer880 My old TCM had already been tuned by my Tuner (Admin Tuning), was tuned more aggressive and you can still feel that with the VR30 trans. I would say it's worth tuning for sure but it's not absolutely necessary.
@popclutch_100 Hello, no the bottom bolts don't line up, I left it like that and it's never been an issue, you have enough bolts that do lime up and it's enough to keep the transmission secure.
@@MemosGarageAZ well I appreciate replying to me and letting me know. Then in that way I'll definitely be considering still to run that VR 30 transmission.
Cделал такой свап на своем g37x … есть такое ощущение, как будто для этой коробки не хватает давления , особенно в режиме D , Ds . В ручном режиме переключает бодро , но 6 и 7 передача , включается немного не четко .. может из за редуктора 3.69 , а возможно из за малого давления масла . Думаю стоит его поднять и отстроить четкость переключений по передачам , тогда будет хорошо .
I think what you're saying translates to this, hopefully: "I made such a swap on my 937x ... there is a feeling as if there is not enough pressure for this box, especially in D, Ds mode. In manual mode, it shifts briskly, but 6th and 7th gears are engaged a little unclearly .. maybe because of the 3.69 gearbox, or perhaps because of low oil pressure. I think it is worth raising it and adjusting the clarity of gear shifts, then it will be good."
I know man, but Concept Z who is local to me had it in stock, picked it up the day after I paid for it, so I'm just gonna have to roll with this one for now and hope for the best 😁.
To be completely honest none of the flex plates hold billet or not they still brake I had a friend with a fast intentions that broke it na u just never know
It's AZ no salt on the roads, so yeah very clean underneath. I work in a very professional environment and I don't want my hands to look like mechanic hands LOL
Love the content bro. Very informative and instructional. Keep up the quality.
Thank you, much appreciated 🙏. BTW I'm subscribed to your channel, really enjoying the old Datsun content 💪
This car is like a dream build for me 🫶🏼
Glad to see the swap content again man I’m pretty sure I’m gonna need another tcm my other one is starting to act up again
Hello, sucks, sorry to hear that
Great Content Brother!!! Hope you go supercharger one day
Thanks man 🙏😀. I don't think I'll be supercharging the G anytime soon, if plans go the way I want in the next year or so, I'll be getting another car to replace the G. Now the Z is a for ever car so I'll definitely be boosting it sometime in the near future 😆.
@MemosGarageAZ noooooo 😆😆 congrats man.. and thanks for the content
I tried FI flex plate and LOJ with Arp bolts and red loctite torqued to 95ft-lbs still came loose.
I ended up adding the OEM metal bolts plate and tack weld the bolts😅
Hope it will hold 🤞
Dam for reals, how many miles without say before the bolts backed out? Thanks for sharing.
U should get pedal commander makes the biggest difference out of all my mods trust me. It opens the the throttle wide open alot quicker and regular acceleration with less effort. Great throttle response and makes even my 7at fun again
Yeah man I have one on my G, I also had one on my 370z, but unfortunately the one on the Z started giving me problems and made the car throw a CEL and put it into limp mode too. Had to throw that one away, for that reason I removed the two videos I had about the Pedal Commander, I couldn't continue advertising knowing the issue it causes. What's weird is that the one on my G has been perfect, so go figure LOL.
Thanks for the video. Im sure youll help a ton of people
Thanks, that's always my goal with these videos 😀
Thats cool, i have the vr30 7AT in my 370z and also put in the LOJ plate. Did you ever tune/re-tune your car solely for the new transmission? Do you think there would be a benefit in that?
@@Mrgamer880 My old TCM had already been tuned by my Tuner (Admin Tuning), was tuned more aggressive and you can still feel that with the VR30 trans. I would say it's worth tuning for sure but it's not absolutely necessary.
When you installed your vr30 transmission. Did your bottom bolts line up? If not, what did you do in this situation?
@popclutch_100 Hello, no the bottom bolts don't line up, I left it like that and it's never been an issue, you have enough bolts that do lime up and it's enough to keep the transmission secure.
@@MemosGarageAZ well I appreciate replying to me and letting me know. Then in that way I'll definitely be considering still to run that VR 30 transmission.
@popclutch_100 sure man, no problem
Cделал такой свап на своем g37x … есть такое ощущение, как будто для этой коробки не хватает давления , особенно в режиме D , Ds . В ручном режиме переключает бодро , но 6 и 7 передача , включается немного не четко .. может из за редуктора 3.69 , а возможно из за малого давления масла . Думаю стоит его поднять и отстроить четкость переключений по передачам , тогда будет хорошо .
I think what you're saying translates to this, hopefully:
"I made such a swap on my 937x ... there is a feeling as if there is not enough pressure for this box, especially in D, Ds mode. In manual mode, it shifts briskly, but 6th and 7th gears are engaged a little unclearly .. maybe because of the 3.69 gearbox, or perhaps because of low oil pressure. I think it is worth raising it and adjusting the clarity of gear shifts, then it will be good."
A good Tuner should be able to fix your trans solenoid line pressure to make the shifts feel more consistent. Good luck.
Hey would a z1 flex plate be fine
Yeah man, I actually would have bought the Z1 flex plate had I known they made one.
Any updates on the flex plate?
So far no issues, gonna do an oil change soon and remove the inspection plate to check on things.
Any feedback yet on how that flex plate is holding up?
Hello, it's too early to say, I've only put about 3K miles on it so far, but so far so good.
Should have went with fast intentions flex plate bro way better wit no large holes an rated for 800+ wtq
I know man, but Concept Z who is local to me had it in stock, picked it up the day after I paid for it, so I'm just gonna have to roll with this one for now and hope for the best 😁.
@@MemosGarageAZ you’ll be good still loj is good fi just better lol
@VQVaughn hahaha, I hope so, really don't want to drop the trans again anytime soon LOL.
To be completely honest none of the flex plates hold billet or not they still brake I had a friend with a fast intentions that broke it na u just never know
@@prettyboytyrese7727 Yup true, you never know, only went with this one because it was available and I was on a time crunch.
Very good. Wish my cars were as clean. You don’t need gloves.
It's AZ no salt on the roads, so yeah very clean underneath. I work in a very professional environment and I don't want my hands to look like mechanic hands LOL