It has the aesthetics of something you'd find on page 8 of Banggood's search results for "RC truck", but that's some serious hardware where it counts. If my LHS stocked Corally I'd strongly consider this!
@@rcdriver yes the body may serve a more important function. I think with this one I can get past the look. It’s not bad just not as cool or aggressive looking as some of the other rtr out there
Agreed, Team Corally could really use an update in the body design department. The overall aesthetics have to hurt their sales numbers. They bodies do not keep up with what's underneath!
no truck would ever be perfect its a functional body with the support , bodies are cheap and everyone should paint atleast one. The traxxss maxx is indestructible and fun . Dosen't look much better and couldnt hold a candle in performance.
Great unbox and very detailed as always, easy to digest. Do have to say I'm starting to like the body, even though I bought a Silverado body for when the day comes haha All the best Per Team corally bashers
Hey guys don't forget about the 4s Kraton or the 4s outcast which have gone the way of the DoDo. WHY! Nobody wanted them and for 100.00 bucks more my Kraton 4s was a BEAST. Greg you can attest to that. You had the Bronze outcast 4s on your channel what 1-1/2 - 2 yrs ago ( that's where I fell in love) But for myself owning all 3 power bands of Arrma all at the same time.... I went with the vehicle that had the most to offer by way of voltage. 6s all the way. I felt I couldn't go wrong I can throw any combo of battery packs that I have charged and just send it. 3s is a teaser 4s is average not much going on in most peoples eyes 6s is just a Monster 8s too big IMO. Good luck to Team Corally I hope the 4s platform blows up and squashes the competition.
I know a lot of people like soaking their plastics in WD 40 but I've got a method whenever I get a new car I'll rub all the plastic down with WD 40 after each run for the first 5-7 times I take em out Scrub it in with a toothbrush and then wipe down with a rag Letting the plastic absorb the wd 40 slowly as it gets used and bends I swear by this method it works much better then one initial soak I've had my xmaxx for 3 years now and I'm still on my stock arms And I hit some big jumps flat out I've landed sideways on one wheel after doing triple flips Ive nose dived right into a jagged rock from 20-30 feet in the air and it takes it So after each run your first few times running your new rc car scrub a generous amount of wd40 to all plastic parts of the car Arms Bumpers Shock towers Belly of the chassis etc and then just wipe it down Obviously don't go nuts first few times out till the plastics have had time to break in But by the 5th outing she should be ready to take way more abuse then before
This with a new body, and the Jconcepts renegade pre-mounts for the kraton would be siiiiick! I love my SMT10, but I think I'm going to get this and swap the body and tires for a super durable bashing monster truck!
Nice you got one Greg! Yours must've came late as you're usually the first guy to the punch. This thing is a tank! I'm waiting for snow to finally melt to be able to run mine lol
It took a bit to get to me and I held up a little trying to wait out the weather and get some good action. But that didn’t work. I’m just pumped I get to share it here on the channel. Team Corally continues to improve and impress!
@@rcdriver Oh yeah I agree Greg! And yeah im not too far from you so I know what you're dealing with. Supposed to warm up the next few days so hopefully it will wipe out the snow. This thing is gonna be a huge hit
@Matthew Hayslett Ha funny you say that bro I'm in RI! I completely agree with everything you said. Nothing beats the b5 bodies. I have 2. I have a BW k04 with all the supporting mods (exhaust, fmic, injectors, stage 2 tune) in my b5 2001.5 a4 santorin blue that's my daily driver and I have a 01 s4 that's been a ongoing project that I hope to continue this spring. I used to go to meets alot. Are you in Southern Mass? Are you on IG? Nice to meet a fellow b5/audi enthusiast. I might be selling my a4 this spring but not positive yet. It's been sitting since end of summer and my s4 has been down since the previous summer. Just tough finding time but definitely got big plans this spring! 🍻
Hi! It looks like an very solid, strong and beefy 1/10 scale platform! The body style? I could look past that. Here counts : Form follows function... I look forward for an serious test
What was awesome about the pro-line Pro MT 4 x 4 is that it came with quality body, wheels and tires right out of the box. Maybe companies should consider having licensing agreements to have pro-line bodies. These bodies along with some others out there are just trying too hard...The platform looks solid.
PL did have a cool body and tires but those who drove it hard found it’s weak spots. Those are addressed on this truck and are more important than styling. Yup, it’s solid, it should have a good following.
I think it's a cool truck, BUT in the body design I feel it kinda needs a spoiler on the rear end w/o going full on truggy w it. I'm sure I'm not the only one that thinks it's missing sum necessary flavor there in this form. So close tho, I'm late to the CO rally Kool-aid fan club but am really starting to dig them in general as a solid option if you don't want to go with the other two big brands for sum reason. Hey, really great review as usual 👌!!!!!
I'm considering either getting this or the Redcat Kaiju EXT for bashing, but I'm having trouble deciding. Which would you guys recommend between the two?
Quick question would it bother you if since there aren’t any RC driver decals in the merch store if I made one on a cricut vinyl cutter just for personal use not for sale?
Your welcome I definitely would want take anything from your channel and want to support it. I also love the RC driver website it’s really cool. Keep up the good work man I know how much the channel has going on and that you take time to reply to comments means a lot!👍🏼👍🏼
I currently have a TRAXXAS 2973 EZ-PEAK LIVE DUAL ID CHARGER and 2) 2890X 4S 6700mAh lipo batteries with the ID connector. How do I use them on the Sketer I just purchased ? Thanks for any help.
Good car but I think it is to expensive. My Carson virus race is about 360€ including battery and charger and it runs 82kph out of the box. If they would drop the price that would be my next car.
Not to knock you but you lose a couple cool points for that jeep truck...... Im just messing with you i give all my friends with the jeep trucks crap in good humor . I do believe this is going to be my wifes next truck. She just constantly breaks her vorteks blx 4x4. The diffs on the skeeter sold me. It should be pretty much bullet proof on 4s. thanks for great video
Why do companies always lie about top speed. It would be just as popular if it said 42 on the box. Who are they trying to flex on with these made up numbers?
I agree it is a TANK! Put a 15t pinion and you have a great MT!
Been watching your TikTok videos on the truck. Looks like a blast!
I have a radix 4. It’s ultra reliable and is a blast to drive. Tempted with one of these now! 😊
It has the aesthetics of something you'd find on page 8 of Banggood's search results for "RC truck", but that's some serious hardware where it counts. If my LHS stocked Corally I'd strongly consider this!
This is exactly how I feel good comment! They are taking a serious beating and keep on going it looks like
Yup, not the most appealing looking body out there, but hopefully it’s shape increases the odds of rolling back over onto its wheels after a crash.
@@rcdriver yes the body may serve a more important function. I think with this one I can get past the look. It’s not bad just not as cool or aggressive looking as some of the other rtr out there
Agreed, Team Corally could really use an update in the body design department. The overall aesthetics have to hurt their sales numbers. They bodies do not keep up with what's underneath!
no truck would ever be perfect its a functional body with the support , bodies are cheap and everyone should paint atleast one. The traxxss maxx is indestructible and fun . Dosen't look much better and couldnt hold a candle in performance.
Never even looked at Team Corally as a potential rc for me...
Time to take a second look at what's out there.
Seems like a great truck!! Thanks for the overview. 👍
Great unbox and very detailed as always, easy to digest.
Do have to say I'm starting to like the body, even though I bought a Silverado body for when the day comes haha
All the best
Per
Team corally bashers
Hey guys don't forget about the 4s Kraton or the 4s outcast which have gone the way of the DoDo. WHY! Nobody wanted them and for 100.00 bucks more my Kraton 4s was a BEAST. Greg you can attest to that. You had the Bronze outcast 4s on your channel what 1-1/2 - 2 yrs ago ( that's where I fell in love) But for myself owning all 3 power bands of Arrma all at the same time.... I went with the vehicle that had the most to offer by way of voltage. 6s all the way. I felt I couldn't go wrong I can throw any combo of battery packs that I have charged and just send it.
3s is a teaser 4s is average not much going on in most peoples eyes 6s is just a Monster 8s too big IMO.
Good luck to Team Corally I hope the 4s platform blows up and squashes the competition.
Best review every time 👍🏻👍🏻
I know a lot of people like soaking their plastics in WD 40 but I've got a method whenever I get a new car I'll rub all the plastic down with WD 40 after each run for the first 5-7 times I take em out Scrub it in with a toothbrush and then wipe down with a rag Letting the plastic absorb the wd 40 slowly as it gets used and bends I swear by this method it works much better then one initial soak I've had my xmaxx for 3 years now and I'm still on my stock arms And I hit some big jumps flat out I've landed sideways on one wheel after doing triple flips Ive nose dived right into a jagged rock from 20-30 feet in the air and it takes it So after each run your first few times running your new rc car scrub a generous amount of wd40 to all plastic parts of the car Arms Bumpers Shock towers Belly of the chassis etc and then just wipe it down Obviously don't go nuts first few times out till the plastics have had time to break in But by the 5th outing she should be ready to take way more abuse then before
This with a new body, and the Jconcepts renegade pre-mounts for the kraton would be siiiiick! I love my SMT10, but I think I'm going to get this and swap the body and tires for a super durable bashing monster truck!
Really like your channel and content thanks for sharing.
Great video sir! All things needed to know was right on the spot. Awesome!
Happy I could help!
I suggest you to do more video like this (Unboxing + Review in one video, its more fun
)
Looks awesome. Might have to put one next to my Maxx 4s.
Holy cow, that thing looks tough.
I have this the skeeter it's a really nice you can't get a better deal
Cool truck! I really want to see how it does with some good old bashing. Very nice so far.
Not bad speed looks really cold 🥶 maybe more on a warmer day 👍🏻
Arrma has their work cut out for them if they ever release an updated 4s line
Nice you got one Greg! Yours must've came late as you're usually the first guy to the punch. This thing is a tank! I'm waiting for snow to finally melt to be able to run mine lol
It took a bit to get to me and I held up a little trying to wait out the weather and get some good action. But that didn’t work. I’m just pumped I get to share it here on the channel. Team Corally continues to improve and impress!
@@rcdriver Oh yeah I agree Greg! And yeah im not too far from you so I know what you're dealing with. Supposed to warm up the next few days so hopefully it will wipe out the snow. This thing is gonna be a huge hit
@Matthew Hayslett Ha funny you say that bro I'm in RI! I completely agree with everything you said. Nothing beats the b5 bodies. I have 2. I have a BW k04 with all the supporting mods (exhaust, fmic, injectors, stage 2 tune) in my b5 2001.5 a4 santorin blue that's my daily driver and I have a 01 s4 that's been a ongoing project that I hope to continue this spring. I used to go to meets alot. Are you in Southern Mass? Are you on IG? Nice to meet a fellow b5/audi enthusiast. I might be selling my a4 this spring but not positive yet. It's been sitting since end of summer and my s4 has been down since the previous summer. Just tough finding time but definitely got big plans this spring! 🍻
I ve be always wanted to build a kit but I’ve never had enough budget.
IMO all they need is a higher offset wheel combo to give some easy width gains.
Skeet skeet skeet.
Hi! It looks like an very solid, strong and beefy 1/10 scale platform! The body style? I could look past that. Here counts : Form follows function... I look forward for an serious test
It's Corallys equivalent to the Maxx 👍
What was awesome about the pro-line Pro MT 4 x 4 is that it came with quality body, wheels and tires right out of the box. Maybe companies should consider having licensing agreements to have pro-line bodies. These bodies along with some others out there are just trying too hard...The platform looks solid.
PL did have a cool body and tires but those who drove it hard found it’s weak spots. Those are addressed on this truck and are more important than styling. Yup, it’s solid, it should have a good following.
I am surprised my local Hobbytown doesn’t have it in stock as they carry other Corally products. Definitely want to check this out!
They should be able to get it if they stock other Corally cars. They come through HRP distribution and they have the truck in stock.
@@rcdriver, thanks for the tip! I heard good things about Corally RCs. Ordering parts can be a challenge, from what I heard.
Nice!
I think it's a cool truck, BUT in the body design I feel it kinda needs a spoiler on the rear end w/o going full on truggy w it.
I'm sure I'm not the only one that thinks it's missing sum necessary flavor there in this form.
So close tho, I'm late to the CO rally Kool-aid fan club but am really starting to dig them in general as a solid option if you don't want to go with the other two big brands for sum reason.
Hey, really great review as usual 👌!!!!!
Super and nice Video Bro' 🙂🍻
oh, your wheels came off easy. I watched one where they are super tight fit
I’d say mine were very snug. I had to push on the hex hub with my thumb to pop off the wheel off.
When arrma stops the 6s 8s cash grab their 4s diff shimming line up will be left in the dust ....nice truck 🚚 🛻
Great video as always Greg! Definitely an interesting looking body, I do like the color though. Also do you have any 1/24 sized RCDriver decals?
In which app Traxxas rustler 4x4 vxl
Is that ESC a relabelled Hobbywing Max 8? It looks exactly the same, just different Colour. Probably it’s possible to use the Hobbywing Progbox.
Yes and yes :)
my motor on my arrrma kraton 4s literally exploded… do you think that I’d be able to purchase this motor somewhere!!!
I'm considering either getting this or the Redcat Kaiju EXT for bashing, but I'm having trouble deciding. Which would you guys recommend between the two?
Get the Sketer. My buddy's Kaiju EXT is always broken. Sketer is a TANK.
I don’t understand why the Proline truck was discontinued. I guess the sales weren’t where they thought it should be 🤷🏻♂️
You can tell you that is for free no negative
Quick question would it bother you if since there aren’t any RC driver decals in the merch store if I made one on a cricut vinyl cutter just for personal use not for sale?
Personal use is fine. Thanks so much for asking and the support!
Your welcome I definitely would want take anything from your channel and want to support it. I also love the RC driver website it’s really cool. Keep up the good work man I know how much the channel has going on and that you take time to reply to comments means a lot!👍🏼👍🏼
I currently have a TRAXXAS 2973 EZ-PEAK LIVE DUAL ID CHARGER and 2) 2890X 4S 6700mAh lipo batteries with the ID connector. How do I use them on the Sketer I just purchased ?
Thanks for any help.
So is corally a arrma sister company or something?
Nah it's a belgian company founded in the mid 1980's
Should i get the Skeeter for £399 or add £50 and get the MT8?
What did you do in the end which one dyou go for Xandro
@@gonzodetroitify after watching Tomely RC and Kevin ‘s MT8 video, I went ahead and got the Skeeter.
Good car but I think it is to expensive.
My Carson virus race is about 360€ including battery and charger and it runs 82kph out of the box.
If they would drop the price that would be my next car.
Um yes you can run it at the skate park!
Not to knock you but you lose a couple cool points for that jeep truck...... Im just messing with you i give all my friends with the jeep trucks crap in good humor . I do believe this is going to be my wifes next truck. She just constantly breaks her vorteks blx 4x4. The diffs on the skeeter sold me. It should be pretty much bullet proof on 4s. thanks for great video
Love your channel. I take a lot of advice from you for my channel. Love 4s bashers too
Looks lile a tank i like it but it looks like arrma truck
look like a copy of arrma the outside look so toygrade but the inside look great
Why do companies always lie about top speed. It would be just as popular if it said 42 on the box. Who are they trying to flex on with these made up numbers?
Ewwww look at that body....just run chassis only with Team Corally or put an Arrma body on it...
Great review awesome truck!
🤘🏼🤘🏼