Thank you so much! I wonder why no technicians from Germany have uploaded a tutorial how to open a VW POLO door with a deadlock failure. Reading the comments or recommendations on German VW POLO forum pages were a nightmare for me. No clue, just dummy chats... Thumbs up for your work and sharing with us, Bill!
I’ve used this method about 10 times now on various polos, golfs and even a Skoda and it works everytime and takes less than 10 minutes! Fantastic find
Well a big thanks to you Bill. I've had precisely this problem on our Polo. I've watched your video now it must be 30+ times just to get it all completely clear in my head; got a scrap car door lock in and pushed ahead. The struggles were 1) as you said getting the door skin off - took an hour and a bit. 2) finding where precisely to drill - frankly it took 3 small pilot holes to find the screw, but it was good in the end. And 4) my beautiful security hex keys on the lock bolts were of course not sided enough for the VW bolts, so it was mole grips that did it. Reassembly was very fiddly and seemed to take forever, but its all come together. Thanks again for posting this, for its clarity and precise solution to the problem. And the sublime calming Irish accent too.
Sam, glad it helped. It is not for the faint hearted. I had to do both door locks and by the time I did the second one I had forgotten the detail, hence the post. I had to use a wrecking bar to remove the door card but it survived!. That was the soul destroying part. We passed the NCT (Irish MOT). Bill
Hi Bill, Thx for this. This is the same as a 2004 2 door Seat Ibiza, the only difference being that it is practically impossible to access the torx screw so had to resort to hammer and chisel. Without this video and your clear explanation I would not have known where to place the chisel. Door is now open just need to work out the easiest way to replace the door lock.
I would also like to thank you so very much for such a precise and informative video that put an end to what seemed like an endless headache. It was actually my driver's door that was stuck but all your tips were spot on, including how to get the electrical plug off completely blind. Thank you, thank you, thank you.
Absolutely brilliant video! Informative and factually correct, (unlike the 'bent coathanger' suggestions elsewhere.) I can't believe VW have designed a lock which fails in the deadlocked position so you can't then open the door!
cheers mate, i missed to drill at the right spot but now the door is open. i didn't remove the iron plate, just unscrewed it to see inside. now the car will have "permission" to stay on the road for an other couple of years. Thank you !!
Excellent thank you for this! Can confirm it works on a Mk4 golf estate. Lock mechanisms look identical. Drilled a hole, drilled another hole because I missed the first one, undid that screw and voila, door opened right up!
Bill Ebrill the door card was tricky, but not too difficult on the Golf. Folding the seat down allowed some access to the bottom torx screw. I ended up having to use the torx bit and a pair of pliers to turn it thanks to my limited tool box and the tight space, but it worked well the same! I was so relieved when I drilled the hole and undid the screw, and the door clunked right open! I’ve got a second little one on the way and we really needed access to that door! Thanks again
Glad I read all the comments far down below before attempting this. 99p wire coat hanger down between window and door, a few wiggles and boom door open. But very nice video explanation.
Thank you for posting this vid. VW garage would only entertain changing the lock if & when the door had been opened. Door card removal a nightmare so I decided to sacrifice it. Small section cut out of card to expose metal door. A couple of holes drilled to locate T20 screw. Door released, lock replaced, replaced door card (eBay £25). Thanks once again.
I just want to thank you for this video.Just did on my friend's vw polo 03 reg left rear door lock.I was struggling to unlock the dead lock.I did loosen the screw with a tiny flat screwdriver tap it with a small hammer ,didn't have to drill a hole ..your video made my job easy .once again thanks for sharing this informative video with us.....hope you posting more videos.
Well done. I did both doors on my daughter's Polo. I got one done without drilling. Once you know what has to be done it is possible to get the screw out. People are wary about drilling. I though about making a special tool but drilled the second one. Thanks for the feedback.
You only need to do this if the motor has failed or jammed internally. The vdub dealer trick is to simply apply power to the cables supplying motor power (via the CCU connector). Simply touch power one way a couple of times +|- then the other way -|+ until you hear (and see it) unlock. If nothing happens then it's the motor that has failed and your only option is the magic hole... A hair dryer on the door card helps soften up the plastic before you try ripping it away from the door.
Bill Ebrill, I haven’t dismantled the lock yet but, before, I wasn’t even in a position to remove it. My lock is on a 2005 Passat but your technique worked a charm!
Thank you! Same problem with Skoda Fabia 2004 rear door. Only difference that drilling hole i,s not possible when door is permanently closed. The screw is under main body corner. You need to do ca 20mm hole near by under the door panel cover - 3 layers metal !!! . And unsrew the screw is not possible (screw is under the main body corner) - you need to damage this buy bigger slotted srewdriver (screw sits in plastic)
Hy, i just used all of youre information. Without it i wold have starred at the door and realized it was nothing i could do, except cutt it off. Thanks for the info wery much.
A lot of info condensed in a short video, hard to find nowadays. It's possible to open the lock without having to drill a hole. Use a slotted screwdriver and hammer it into the small latch seen above your thumb @3:40. This rotates the plate and unlocks the door.
I agree. Well done. It is also possible to fabricate a driver to access it from the side. Coincidentally my daughter traded the Polo two days ago - we got 15 years out of it across two daughters. It was a 2005 car!
To unlock the right hand door deadlock a 1/4 turn of the screw clockwise will do the job , for the left hand door a 1/4 turn anti-clockwise will do the same thing ( but the screw may undo ? ..so if you have it apart put a little loctite under the head... ) As soon as the weather gets a little warmer I'm going to drill both doors , they're bound to deadlock in the future , the hole only needs to be 1/4" if you drill it accurately , and it should be hidden in the surround of the door card. And a T20 screwdriver in the toolbox...
Thanks for the video Bill. My daughters had done the same thing which I've now managed to fix following your guide on how to remove the screw from the lock and has now passed it's MOT. I would just add a couple of comments that might help other people. When trying to remove the door skin, I found it easier to remove the plastic around the wheel arch (inside the car) which meant pulling off the trim around the rear side window and undoing the screws that hold the side of the rear parcel shelf. That allowed me to pull the plastic trim around the door wheel arch area and provide slightly more access to the door trim just above the wheel arch area. I could then use a small 6 inch flat bladed right angled screwdriver to twist underneath the lip of the door trim and pull it off, working my way round the door trim as I managed to unclip each one of the clips holding it. The other thing is I'm not sure if I missed it or it wasn't mentioned but there are 2 white dowels holding the front of the plastic cover on the door lock. Like the window dowel, you need to punch the dowel through the plastic clip, which will drop in behind the inner door panel but can be retrieved once the inner skin has been removed. I took care not to break these when I removed the lock from the scrapyard car. I hadn't realised these were attached on the broken lock and managed to snap the plastic housing when I initially removed the inner door skin.
Many thanks for the reply. My second daughter now has the car so I will go through your Email. I am a bit confused about the dowels but will take a look. One idea about removing the door card was to use a hair dryer to make the plastic more flexible. Thanks for taking the time to comment.
@@billebrill8730 In your video, the door panel picture at 2min 37 secs shows the 2 white plastic dowels just below where the door handle cable goes through the inner door panel
@@groundlingstheatre8006 Thanks, I see the dowels you refer to. I don't have enough video to sort out how I handled them. I actually may not have replaced them. I will take a look at the old locks. But it is an omission.
@@groundlingstheatre8006 I see the bracket. It was pop riveted to the lock. The new lock did not have one and I had broken it when removing. I did not replace it as I felt the lock was secure enough without it. I may do a supplement mentioning that. The dowels can be tapped out using a 3mm punch and as you say will be trapped in the base of the door for subsequent retrieval.
I have a Polo with this very problem, and on the same door at that. Will try this later. Can i just ask, do you need to put that back? (3:57) What does exactly the deadlock do? Cheers.
Tiago Costa The lock is all one unit. I was just showing why that piece has to be taken off. If you replace the lock it was have that piece installed. Removing the door panel required brute force. One guy gave a tip to use a hair dryer to make the plastic more flexible. I was prepared to break it! Good luck.
Tiago Costa The deadlock prevents the door being opened from the lock button or the handle. Breaking the window and getting inside still will not open the door - it must be opened electrically.
Really helpful video thanks Bill - central locking replaced and working... magic! however, I stupidly unscrewed the small Torkx bolt that is used to remove the rear part of the door handle... and a semi circular piece of metal and the screw fell into the inside of the door - so I took the door card/insides off and retrieved them... the trouble is, I cannot find anything about how that part of the door lock goes back together... I assume that I have to take off all of the door liner/door lock etc to access the area.... an ideas?
Hello, Thanks so much for your video. I had my car deadlocked and I was able to remove the locker from inside. Now I am opening it and fixing it (following some other guides online), but I do have some doubts: 1) How exactly is the deadlock position automatically triggered? I understand that when the green lever is in the upper position, the lock will not operate, but I am only able to reproduce this manually. I am wondering how the car/lock does that automatically, and under which circumstances? 2) I see the green leaver has also three main positions: up (deadlock), down, and middle. What is the difference between the other two positions? My lock is always operating at the lowest position and the mechanism seems to be working fine, but I am wondering if this is correct, or if it should operate with the green leaver always in the middle position. Thank you in advance.
Many thanks, this method, having tried everything else, got the read passenger door open. Now what to do to stop it happening again ;) Is it possible to just disable the deadlock by removing a part>
Hi. I’ve managed to get the panel off and I can see the actuator. My handle on the outside doesn’t have the pin visible when the handle is pulled out. Will I still be able to get the door open? As it looks like the handle isn’t pulling any wires
Thanks! I think this is the problem I am having with my Passat. After you have taken out the screw and then being able to open the door, can the door be closed again? I have a new lock coming in the mail, and I am considering doing this right away before the lock arrives. I don't mind not being able to lock the car for a few days, but only if the door can be closed so I can drive it.
@@billebrill8730 yes it was a bit tricky, especially since I couldn't open the door. I used a few videos from youtube to help me out, though (this video in particular: ua-cam.com/video/lW2hrGoL3TI/v-deo.html). No major issues, just a lot of struggling...
I have followed this procedure and have not been able to open my door rear offside passenger door ..the screw plastic and metal part all out .. not sure if I can upload photos in comments any help will be appreciated.. vw 2005 polo 1.4 auto
It is very difficult. I was prepared to sacrifice the card/panel as the car failed it’s NCT and was useless. Make sure no screws or anything holding it back. I used a pry/wrecking type bar and hooked it under the card at the bottom of the door towards the front. I had to use a lot of strength and was prepared to break it and get a replacement from a breaker if necessary. You are pulling it through a space that is smaller than the card itself as the lips of the card bind. Be careful. If you make progress pack behind it to prevent it pulling back. You could stuff old towels behind as you make progress to prevent it springing back. Be prepared to damage it!
It was extremely difficult. There were no screws at the bottom of the door card in my case but it is work checking. I used a crowbar and was prepared to destroy the door card if necessary as the car had failed its MOT. It was very distorted as I levered it out but the plastic did not break. I used most of the force at the bottom of the card towards the front of the car. I removed both rear door cards on separate occasions using the same method.
God bless you man 🙂 I opened the door this way, removed the lockdoor, installed a new one, locked it and the same situation again, I can't open it either from the inside or from the outside. What's the problem
but if I drill a hole directly and then the door opens and I deactivate the central locking of the rear door and open it only from the inside can I do it and then close the door from the inside 😅
Really great video! It is really informative and well put together. Although I wonder about when you drill the hole and loosen the screw on the lock, is it enough to remove that screw and not put it back in order to use the door as normal? Or do I need to replace the lock. I'm afraid I didn't quite get that part. Cheers from Sweden!
The door is electrically locked. It fails because the motor is damaged. You may be able to use it manually but the purpose is to get the door open so you can remove the lock to inspect, repair or replace. It may keep deadlocking intermittently unless you take some action like disabling the electrics. Does that help?
@@billebrill8730 Okay, I think I understand. The easiest for me would be to just use the door manually, and lock/open it manually. I would like to just remove the "deadlock" and unplug the electrics. When you remove the deadlock at 3.58, can I just use the lock without the "deadlock" or is that a part of the normal locking mechanism? Thank you for your response, I really appriciate it. My car just failed the MOT because of this.
Hi, I don't know the golf so am not sure, they may have similar locks. Getting the doorcard off with the car door closed is the hardest part. It sounds like the same problem but the layout of the lock and screw may be different. My daughter's car failed her NCT so we had to do something!
The N/S/R door on my polo 9n does the exact same, doesn't respond to unlocking and cannot be opened inside or out, my dad wants to wreck the doorcard so we can access the components, is that necessary?
I was stuck with the car failing Irish NCT (MOT). Also dangerous as a passenger at this side is locked in. I decided to sacrifice to door card. However the plastic is very tough. I used a crowbar at the bottom front of the door card - just checking no screws - and lifting it upwards at the same time. It distorted but recovered and was reusable. I did this for both rear doors at different times and got away with it. It was very tough to remove it as you are pulling it into a smaller space.
I got it on eBay. Check numbers etc.Here is an example:- www.ebay.ie/itm/For-VW-Polo-9N-Caddy-Iii-Door-Lock-Mechanism-Rear-Left-Side-OE-3B4839015AG-Fits/273502044802?_trkparms=ispr
It was extremely difficult. There were no screws at the bottom of the door card in my case but it is work checking. I used a crowbar and was prepared to destroy the door card if necessary as the car had failed its MOT. It was very distorted as I levered it out but the plastic did not break. I used most of the force at the bottom of the card towards the front of the car. I removed both rear door cards on separate occasions using the same method.
Hi everyone i have a 2002 jetta A4 1.6 model now this video that i just watched i have the same problem so if i understand correctly i have to drill a whole on the door to screw that screw out to open my door am i wright
@@billebrill8730 hahahahaha i am going to try my best i will ask my sister boyfriend to make a special tool because i don't really whant to drill wholes on my car but if i have to i will but neat
@@billebrill8730 The driver side opens and makes the clicking sounds but not the left passenger side. It's stuck no noise when unlocking with key nor the inner button to unlock or the handle itself.
@@sanelisonxitywa2203 Sorry I misunderstood. The front doors are slightly different but the same principle applies. The little motor that drives the lock gives out and if the deadlock is engaged you need to get at the lock to disassemble the deadlocked part. Some people have been able to operate the lock by using a higher voltage but this requires detailed wiring knowledge to access to battery feed to the lock from the fuse box but not guaranteed to work. Removing the door card is the hardest part so you can see what your are dealing with.
@@billebrill8730 That's my biggest problem. Removing the door. A guy suggested I cut out the inside panel and work it from there but I doubt it will give me access to the mechanism. I'll keep trying all the ideas. Thanks a lot for your advice and tjme
Yeah its possible! 😀 well thanks removing the elektrick conector is pain in the ass.. my fingers are cut bleeding as fuck and he is still the, my question is its possible to repair the old lock after dissarming the deadlock?
I used a crowbar after checking there were no screws at the base of the door card. I was prepared to sacrifice the card as car had failed MOT ( called NCT in Ireland) and was therefore useless. It is very tough plastic and survived the distortion required to remove it against what seems an impossible task. It took all my strength and camera was left to one side!! You are pulling it through a gap that is smaller than the card itself!
@@jeesjee888 Once the metal tongue under the screw is fully removed, the door is unlocked. Check to see that the plastic piece under the tongue is not jamming it. You could reconnect the inside door cable to see if opening from the inside works. The lock is operated from the cable on the outside handle or from the bowden cable connected to the inner handle. The original fault may be different than the one I outlined. It may be in the lock rather than the electrical actuator.
Thank you so much! I wonder why no technicians from Germany have uploaded a tutorial how to open a VW POLO door with a deadlock failure.
Reading the comments or recommendations on German VW POLO forum pages were a nightmare for me. No clue, just dummy chats...
Thumbs up for your work and sharing with us, Bill!
Job done after months of frustration. You’re a star!
I’ve used this method about 10 times now on various polos, golfs and even a Skoda and it works everytime and takes less than 10 minutes! Fantastic find
Less than 10minutes?
@@ianhe-kensken9303 yes
@@ianhe-kensken9303 Of course since the only fiddly part is to avoid damaging the actual window. If you know what you're doing assembly takes more
Well a big thanks to you Bill. I've had precisely this problem on our Polo. I've watched your video now it must be 30+ times just to get it all completely clear in my head; got a scrap car door lock in and pushed ahead. The struggles were 1) as you said getting the door skin off - took an hour and a bit. 2) finding where precisely to drill - frankly it took 3 small pilot holes to find the screw, but it was good in the end. And 4) my beautiful security hex keys on the lock bolts were of course not sided enough for the VW bolts, so it was mole grips that did it. Reassembly was very fiddly and seemed to take forever, but its all come together. Thanks again for posting this, for its clarity and precise solution to the problem. And the sublime calming Irish accent too.
Sam, glad it helped. It is not for the faint hearted. I had to do both door locks and by the time I did the second one I had forgotten the detail, hence the post. I had to use a wrecking bar to remove the door card but it survived!. That was the soul destroying part. We passed the NCT (Irish MOT). Bill
@@billebrill8730 don't drill a hole - just prise the lever (that's held on by the screw) off with a flat blade screwdriver...
Hi Bill, Thx for this. This is the same as a 2004 2 door Seat Ibiza, the only difference being that it is practically impossible to access the torx screw so had to resort to hammer and chisel. Without this video and your clear explanation I would not have known where to place the chisel. Door is now open just need to work out the easiest way to replace the door lock.
I would also like to thank you so very much for such a precise and informative video that put an end to what seemed like an endless headache. It was actually my driver's door that was stuck but all your tips were spot on, including how to get the electrical plug off completely blind. Thank you, thank you, thank you.
Absolute legend you are mate. After hours of trying and searching, this did it for me. Thanks heaps.
Thanks so much for this video. Your explanation is great. I will attempt to unlock my door😵💫
Hi.. I just wanted to thank for such excellent instrutions/ directions which were a great help in not giving up the quest .. job done !!
This is beautifully explained , thank you
Blind screws, drills, ‘ know how’, greatly appreciated 👍👍😊
Absolutely brilliant video! Informative and factually correct, (unlike the 'bent coathanger' suggestions elsewhere.) I can't believe VW have designed a lock which fails in the deadlocked position so you can't then open the door!
Nigel Holmes Many thanks for your kind words. B
cheers mate, i missed to drill at the right spot but now the door is open. i didn't remove the iron plate, just unscrewed it to see inside.
now the car will have "permission" to stay on the road for an other couple of years.
Thank you !!
Glad to help.
Excellent thank you for this! Can confirm it works on a Mk4 golf estate. Lock mechanisms look identical. Drilled a hole, drilled another hole because I missed the first one, undid that screw and voila, door opened right up!
Thanks for the feedback. How did you get on removing the door card? I found that quite a challenge.
Bill Ebrill the door card was tricky, but not too difficult on the Golf. Folding the seat down allowed some access to the bottom torx screw. I ended up having to use the torx bit and a pair of pliers to turn it thanks to my limited tool box and the tight space, but it worked well the same! I was so relieved when I drilled the hole and undid the screw, and the door clunked right open! I’ve got a second little one on the way and we really needed access to that door! Thanks again
Thanks for the video, its the only information i could find about this issue, i drilled a hole, unscrew the Torx screw and the door opens again.
One of best videos great detail
Thank you
Dear Bill,
Thank you so much for making this video. It helped me a lot!
Glad it helped. B.
Glad I read all the comments far down below before attempting this. 99p wire coat hanger down between window and door, a few wiggles and boom door open. But very nice video explanation.
Dan Everitt I could not force it and had to disassemble. It depends on whether it failed locked or double locked. In my case it was double locked.
This is a marvelous presentation and has proven to be very useful. Thank you
Thank for your sharing Bill. It truly helps me doing it.
Thanks, nice to get the feedback.
Very helpful video Thank you. The cut outs to show the dead lock were great 😃👍
Thank you for posting this vid. VW garage would only entertain changing the lock if & when the door had been opened. Door card removal a nightmare so I decided to sacrifice it. Small section cut out of card to expose metal door. A couple of holes drilled to locate T20 screw. Door released, lock replaced, replaced door card (eBay £25). Thanks once again.
I just want to thank you for this video.Just did on my friend's vw polo 03 reg left rear door lock.I was struggling to unlock the dead lock.I did loosen the screw with a tiny flat screwdriver tap it with a small hammer ,didn't have to drill a hole ..your video made my job easy .once again thanks for sharing this informative video with us.....hope you posting more videos.
Well done. I did both doors on my daughter's Polo. I got one done without drilling. Once you know what has to be done it is possible to get the screw out. People are wary about drilling. I though about making a special tool but drilled the second one. Thanks for the feedback.
You only need to do this if the motor has failed or jammed internally. The vdub dealer trick is to simply apply power to the cables supplying motor power (via the CCU connector). Simply touch power one way a couple of times +|- then the other way -|+ until you hear (and see it) unlock. If nothing happens then it's the motor that has failed and your only option is the magic hole... A hair dryer on the door card helps soften up the plastic before you try ripping it away from the door.
You are an absolute legend sir! This worked on a VW Jetta/Bora 2003!
Thanks for the comment and glad it assisted.
Thanks! Worked on the front passenger door on my 2002 Skoda Octavia!
Very helpful saved me a right load of time
Really helpful vid. Managed to get mine off using this trick. Just seen this is your only video as well, great effort going to this detail
This is an excellent video with some really fantastic thought gone into it. I fixed my door quickly, thanks to this great information!
David, glad it helped. Did you have any issue with the door card?
Bill Ebrill, I haven’t dismantled the lock yet but, before, I wasn’t even in a position to remove it. My lock is on a 2005 Passat but your technique worked a charm!
Very very professionnel sir, thank u !
Awesome explanation dude.
Thanks
Thank you.
Just tried it and worked only the door skin was a hassle thanx very much.
Appreciate the comment. Getting the door card off was a bummer. However easy to put back once open!
Very helpful, well detailed and clear. Thanks 🙂
Great video, thank you so much! However, I'm not sure if I want to repair my door now anymore... 🙀😂😀 Greetings from Germany!
Thank you! Same problem with Skoda Fabia 2004 rear door. Only difference that drilling hole i,s not possible when door is permanently closed. The screw is under main body corner. You need to do ca 20mm hole near by under the door panel cover - 3 layers metal !!! . And unsrew the screw is not possible (screw is under the main body corner) - you need to damage this buy bigger slotted srewdriver (screw sits in plastic)
Just the job. Thanks
One thing not covered is the removal of the window dowels which i believe can be very very difficult.
Thanks
@@billebrill8730 Can I disable the deadlock lever and use the door till I get the correct lock. Would it get through an MOT
@@thomaslynas721 as long as the door opens and closes it should pass the MOT
Life saver! It was my drivers door that wouldn't open on my Passat; drilling the whole worked a treat :)
Gareth Hollis Thanks, great to be of assistance. Bill
Cheers buddy.you saved another polo.thank you
Hy, i just used all of youre information. Without it i wold have starred at the door and realized it was nothing i could do, except cutt it off. Thanks for the info wery much.
Thank you for the feedback.
A lot of info condensed in a short video, hard to find nowadays.
It's possible to open the lock without having to drill a hole. Use a slotted screwdriver and hammer it into the small latch seen above your thumb @3:40. This rotates the plate and unlocks the door.
I agree. Well done. It is also possible to fabricate a driver to access it from the side. Coincidentally my daughter traded the Polo two days ago - we got 15 years out of it across two daughters. It was a 2005 car!
@@billebrill8730 Nice, probably the last generation of cars you can really work on and fix things like this cheaply.
To unlock the right hand door deadlock a 1/4 turn of the screw clockwise will do the job , for the left hand door a 1/4 turn anti-clockwise will do the same thing ( but the screw may undo ? ..so if you have it apart put a little loctite under the head... )
As soon as the weather gets a little warmer I'm going to drill both doors , they're bound to deadlock in the future , the hole only needs to be 1/4" if you drill it accurately , and it should be hidden in the surround of the door card. And a T20 screwdriver in the toolbox...
Thanks for the video Bill. My daughters had done the same thing which I've now managed to fix following your guide on how to remove the screw from the lock and has now passed it's MOT. I would just add a couple of comments that might help other people. When trying to remove the door skin, I found it easier to remove the plastic around the wheel arch (inside the car) which meant pulling off the trim around the rear side window and undoing the screws that hold the side of the rear parcel shelf. That allowed me to pull the plastic trim around the door wheel arch area and provide slightly more access to the door trim just above the wheel arch area. I could then use a small 6 inch flat bladed right angled screwdriver to twist underneath the lip of the door trim and pull it off, working my way round the door trim as I managed to unclip each one of the clips holding it. The other thing is I'm not sure if I missed it or it wasn't mentioned but there are 2 white dowels holding the front of the plastic cover on the door lock. Like the window dowel, you need to punch the dowel through the plastic clip, which will drop in behind the inner door panel but can be retrieved once the inner skin has been removed. I took care not to break these when I removed the lock from the scrapyard car. I hadn't realised these were attached on the broken lock and managed to snap the plastic housing when I initially removed the inner door skin.
Many thanks for the reply. My second daughter now has the car so I will go through your Email. I am a bit confused about the dowels but will take a look. One idea about removing the door card was to use a hair dryer to make the plastic more flexible. Thanks for taking the time to comment.
@@billebrill8730 In your video, the door panel picture at 2min 37 secs shows the 2 white plastic dowels just below where the door handle cable goes through the inner door panel
@@groundlingstheatre8006 Thanks, I see the dowels you refer to. I don't have enough video to sort out how I handled them. I actually may not have replaced them. I will take a look at the old locks. But it is an omission.
@@groundlingstheatre8006 I see the bracket. It was pop riveted to the lock. The new lock did not have one and I had broken it when removing. I did not replace it as I felt the lock was secure enough without it. I may do a supplement mentioning that. The dowels can be tapped out using a 3mm punch and as you say will be trapped in the base of the door for subsequent retrieval.
Thanks man,you helped me a lot!
Thank you so much for your help
I have a Polo with this very problem, and on the same door at that. Will try this later.
Can i just ask, do you need to put that back? (3:57)
What does exactly the deadlock do?
Cheers.
Tiago Costa The lock is all one unit. I was just showing why that piece has to be taken off. If you replace the lock it was have that piece installed. Removing the door panel required brute force. One guy gave a tip to use a hair dryer to make the plastic more flexible. I was prepared to break it! Good luck.
Tiago Costa The deadlock prevents the door being opened from the lock button or the handle. Breaking the window and getting inside still will not open the door - it must be opened electrically.
Really helpful video thanks Bill - central locking replaced and working... magic! however, I stupidly unscrewed the small Torkx bolt that is used to remove the rear part of the door handle... and a semi circular piece of metal and the screw fell into the inside of the door - so I took the door card/insides off and retrieved them... the trouble is, I cannot find anything about how that part of the door lock goes back together... I assume that I have to take off all of the door liner/door lock etc to access the area.... an ideas?
Hello, Thanks so much for your video. I had my car deadlocked and I was able to remove the locker from inside. Now I am opening it and fixing it (following some other guides online), but I do have some doubts:
1) How exactly is the deadlock position automatically triggered? I understand that when the green lever is in the upper position, the lock will not operate, but I am only able to reproduce this manually. I am wondering how the car/lock does that automatically, and under which circumstances?
2) I see the green leaver has also three main positions: up (deadlock), down, and middle. What is the difference between the other two positions? My lock is always operating at the lowest position and the mechanism seems to be working fine, but I am wondering if this is correct, or if it should operate with the green leaver always in the middle position.
Thank you in advance.
Thank you so much... 🙏👏🤝
Many thanks, this method, having tried everything else, got the read passenger door open. Now what to do to stop it happening again ;) Is it possible to just disable the deadlock by removing a part>
Hi. I’ve managed to get the panel off and I can see the actuator. My handle on the outside doesn’t have the pin visible when the handle is pulled out. Will I still be able to get the door open? As it looks like the handle isn’t pulling any wires
Excellent. Many thanks for that.
Thank you. Perfect tutorial.
Thanks! I think this is the problem I am having with my Passat. After you have taken out the screw and then being able to open the door, can the door be closed again? I have a new lock coming in the mail, and I am considering doing this right away before the lock arrives. I don't mind not being able to lock the car for a few days, but only if the door can be closed so I can drive it.
Yes as far as I remember, just the deadlock will not work but you can open the door with the outer or inner handle and close it.
It worked! Can confirm that, without replacing the lock, the door both closes and opens correctly now (but cannot be locked). Thanks again :)
89erik did you have issues getting the door card off?
@@billebrill8730 yes it was a bit tricky, especially since I couldn't open the door. I used a few videos from youtube to help me out, though (this video in particular: ua-cam.com/video/lW2hrGoL3TI/v-deo.html). No major issues, just a lot of struggling...
I have followed this procedure and have not been able to open my door rear offside passenger door ..the screw plastic and metal part all out .. not sure if I can upload photos in comments any help will be appreciated.. vw 2005 polo 1.4 auto
Very detailed video. However, I’m finding it impossible to remove the door panel with the door closed on my Polo 9N3
It is very difficult. I was prepared to sacrifice the card/panel as the car failed it’s NCT and was useless. Make sure no screws or anything holding it back. I used a pry/wrecking type bar and hooked it under the card at the bottom of the door towards the front. I had to use a lot of strength and was prepared to break it and get a replacement from a breaker if necessary. You are pulling it through a space that is smaller than the card itself as the lips of the card bind. Be careful. If you make progress pack behind it to prevent it pulling back. You could stuff old towels behind as you make progress to prevent it springing back. Be prepared to damage it!
Thanks a lot! Very useful!
The video is really helpful, but it would be nice to show the process on removing the pannel while the door is closed. I cant do that
It was extremely difficult. There were no screws at the bottom of the door card in my case but it is work checking. I used a crowbar and was prepared to destroy the door card if necessary as the car had failed its MOT. It was very distorted as I levered it out but the plastic did not break. I used most of the force at the bottom of the card towards the front of the car. I removed both rear door cards on separate occasions using the same method.
holy moly the number of views on this video go to show how widespread the problem is 😆
Thanks heaps!
God bless you man 🙂
I opened the door this way, removed the lockdoor, installed a new one, locked it and the same situation again, I can't open it either from the inside or from the outside.
What's the problem
Sounds like a wiring issue!
@@billebrill8730 I also think that electricity is a problem
Really good videos,that “Drill point,is that already on the door?
No, but once the door card is removed you can see the screw and estimate where to drill.
but if I drill a hole directly and then the door opens and I deactivate the central locking of the rear door and open it only from the inside can I do it and then close the door from the inside 😅
Really great video! It is really informative and well put together. Although I wonder about when you drill the hole and loosen the screw on the lock, is it enough to remove that screw and not put it back in order to use the door as normal? Or do I need to replace the lock. I'm afraid I didn't quite get that part.
Cheers from Sweden!
The door is electrically locked. It fails because the motor is damaged. You may be able to use it manually but the purpose is to get the door open so you can remove the lock to inspect, repair or replace. It may keep deadlocking intermittently unless you take some action like disabling the electrics. Does that help?
@@billebrill8730 Okay, I think I understand. The easiest for me would be to just use the door manually, and lock/open it manually. I would like to just remove the "deadlock" and unplug the electrics. When you remove the deadlock at 3.58, can I just use the lock without the "deadlock" or is that a part of the normal locking mechanism?
Thank you for your response, I really appriciate it. My car just failed the MOT because of this.
very, very good and clear..thank you
thank you so much ! is this the same process for the front door too ?
Sorry, can’t answer that as neither front door has failed. Both rear doors failed!
Rare info, thanks
Hi, would you know where can I get the spare part that locks the door? I have the same VW polo model.
Renzo Lari Plenty available on line, exact part number varies by year of manufacture.
@@billebrill8730 Thank you Bill!!
Much appreciated.
You saved my life paddy x
Can this method be used on a Golf Mk5 2004-2005? I really need help because now I can use just the driver door and I have a coupe car
Hi, I don't know the golf so am not sure, they may have similar locks. Getting the doorcard off with the car door closed is the hardest part. It sounds like the same problem but the layout of the lock and screw may be different. My daughter's car failed her NCT so we had to do something!
@@billebrill8730So do you have any idea about can I solve this problem?
The N/S/R door on my polo 9n does the exact same, doesn't respond to unlocking and cannot be opened inside or out, my dad wants to wreck the doorcard so we can access the components, is that necessary?
I was stuck with the car failing Irish NCT (MOT). Also dangerous as a passenger at this side is locked in. I decided to sacrifice to door card. However the plastic is very tough. I used a crowbar at the bottom front of the door card - just checking no screws - and lifting it upwards at the same time. It distorted but recovered and was reusable. I did this for both rear doors at different times and got away with it. It was very tough to remove it as you are pulling it into a smaller space.
May I ask where did you buy the door lock from?
I got it on eBay. Check numbers etc.Here is an example:- www.ebay.ie/itm/For-VW-Polo-9N-Caddy-Iii-Door-Lock-Mechanism-Rear-Left-Side-OE-3B4839015AG-Fits/273502044802?_trkparms=ispr
I have a 2010 vw caddy sliding side door won’t open from outside or inside, i think it’s dead locked 😫
Thanks!
How did you get the rear door panel off whilst door is closed?
It was extremely difficult. There were no screws at the bottom of the door card in my case but it is work checking. I used a crowbar and was prepared to destroy the door card if necessary as the car had failed its MOT. It was very distorted as I levered it out but the plastic did not break. I used most of the force at the bottom of the card towards the front of the car. I removed both rear door cards on separate occasions using the same method.
@@billebrill8730 thank you. I gave up as I don't have necessary tools but I will give it a shot.
Well removing door carp when doors are closed... i am find that its pretty imposible.
yes how is it possible to remove the door plastic panel when door is closed ?
Hi everyone i have a 2002 jetta A4 1.6 model now this video that i just watched i have the same problem so if i understand correctly i have to drill a whole on the door to screw that screw out to open my door am i wright
You need to remove the screw. Can be very awkward without drilling the hole but maybe possible to make a special tool.
@@billebrill8730 hahahahaha i am going to try my best i will ask my sister boyfriend to make a special tool because i don't really whant to drill wholes on my car but if i have to i will but neat
If I take the screw out will the door shut after?
Yes, in my case, it enabled the door to open and close, but it will not lock.
giving me hope :D
How does one remove it on a locked 3door polo. It's locked in and outside. Doesn't open at all
I have no experience of a three door. Sounds like a battery issue!
@@billebrill8730 The driver side opens and makes the clicking sounds but not the left passenger side. It's stuck no noise when unlocking with key nor the inner button to unlock or the handle itself.
But thanks a lot 🙏
@@sanelisonxitywa2203 Sorry I misunderstood. The front doors are slightly different but the same principle applies. The little motor that drives the lock gives out and if the deadlock is engaged you need to get at the lock to disassemble the deadlocked part. Some people have been able to operate the lock by using a higher voltage but this requires detailed wiring knowledge to access to battery feed to the lock from the fuse box but not guaranteed to work. Removing the door card is the hardest part so you can see what your are dealing with.
@@billebrill8730 That's my biggest problem. Removing the door. A guy suggested I cut out the inside panel and work it from there but I doubt it will give me access to the mechanism. I'll keep trying all the ideas. Thanks a lot for your advice and tjme
Thanks you so much
Thanks
Thank you.
excelent details..
Thanks a lot
The germans know how to make a car. dont take it the wrong way. but this was the most SHiT$#$ design ever.
thanks dude
Yeah its possible! 😀 well thanks removing the elektrick conector is pain in the ass.. my fingers are cut bleeding as fuck and he is still the, my question is its possible to repair the old lock after dissarming the deadlock?
my rear door is electric, any assistance?
The lock is electric?
@@billebrill8730 the windows are automatic
There are no screws holding the door card on but check for screws
Some closely related models using the same lock do have screws so best not to assume there are no screws. My 5 door model did not.
Are you anywhere near armagh
No, Dublin.
@@billebrill8730absolutely tortured with trying to get someone to sort this exact problem for me.
Really could do with a video on how to pry off the door card whilst it's shut lol
I used a crowbar after checking there were no screws at the base of the door card. I was prepared to sacrifice the card as car had failed MOT ( called NCT in Ireland) and was therefore useless. It is very tough plastic and survived the distortion required to remove it against what seems an impossible task. It took all my strength and camera was left to one side!! You are pulling it through a gap that is smaller than the card itself!
@@billebrill8730 Going to carry on tomorrow, heard a snap and then something fall into the inside of the card when I was prying on the corner 👀
I cant still get the door open so what now?
Did you remove the tongue completely?
Yes. Is the whole lock system broken or what? There was plastic gear in the screwhole and it looks like it was loose..
@@jeesjee888 Once the metal tongue under the screw is fully removed, the door is unlocked. Check to see that the plastic piece under the tongue is not jamming it. You could reconnect the inside door cable to see if opening from the inside works. The lock is operated from the cable on the outside handle or from the bowden cable connected to the inner handle. The original fault may be different than the one I outlined. It may be in the lock rather than the electrical actuator.
It's a electronic window
sound too low
First time anyone said that!
this is too difficult to me
Pity about that, I had no choice because the car failed its MOT. I found removing the door card very difficult.