2000-2006 Tahoe 3" front + 2" rear lift kit
Вставка
- Опубліковано 29 сер 2024
- Installed 3" front + 2" rear lift kit on 2005 Tahoe....dont forget to like and subscribe for upcoming videos
iG aquinorejectrides
Dropped Trucks, lifted Trucks, Drop kits, lift kits, leveing kits, How to install lift or drop kits, C-Notch, OBS Trucks, Single cab, custom trucks, pickup trucks, F150 Drop Trucks, Jeeps, Mustang, Aquino Reject Rides
Young man, you do an excellent job of explaining things, well done!
Love the star trek fight scene music. Captain kirk and that lizard man squarin off all over again. Epic
Thanks for this, everyone says just use a spring compressor to make the spring smaller but I thought this was the right way to do it
Nat a problem..
Yea for sure the best way to go about it
Big difference, looks great bro
I admire your work sir, even though I prefer the way you had it before. A stunning design
Thanks
Looks awesome !!! Getting ready to do mine this weekend. Hope it goes smoothly.
Nice bro thanks to point me the right way
Ugh. Everyone 15 to 20 year old tahoes look so clean on youtube! I have a Michigan Tahoe. Rockers are gone!😭.
Anyway, great job! Looks really good .
Yes sir they look good👌thanks man
Nice wheel & tire selection’
That looks great
Thanks because I have 3 in the front already, trying to see what the 2" in the rear looks like.
Not a problem...
Were you squatting at all? I'm tryna figure out if 3 is too big cuz ion wanna squat
@@jjbumpas6011 if all you do is 3 in the front you will have squat. An inch higher in the rear. Right now I have 3 in the front, 1.5 in the back with spacers. Currently the rear is only higher by .5 inches but it looks level due to the way the Tahoe is proportioned. 10/10 would recommend lol. Make sure if you don't wanna get new shocks to get shock extensions for front and rear.
sick rig boss
OK, I know I'm off topic BUT would be nice to find some videos on a 2000 escalade 4x4 suspension upgrades, not much out there and I haven't wrenched on a 4x4 since my 1975 IH Scout living where they made them so parts were every where. Wish I had it now.
Yes sir hopefully in the future, it shouldn't be to hard to do.
Keep doing ur thang my brother
U could 35s with 2 inch wheel spacers
seeing your video makes me manna do it to my 04 cadillac escalade esv hows the ride? my only worry is the shocks streached and loosing its damping power do you have to get longer shocks? thx cool video!
It rides great and all you need is the shock extenders and it will ride normal.
Thanks 🙏🏾
I have the same wheels with 35/12.50/20s tires, with that 3" kit will it help to prevent the tires from rubbing against the inside of the fender on a 2001 suburban?
It will definitely help with the rubbing.. but it also depends on the offset of the wheels
@@AquinoRejectRides The offset is negative, comes out plus minus 1/2"
@@juancarlosmoreno4434 yeah it should work you might have to trim a little bit
Where you able to crank your keys all the way up
@@DustinPope-h9c I just crank them up until it was leveled in the front
So the 2 inch spacers in the rear keeps the rake. If I want it leveled with the front do you think 1.5 inch spacers would work?
Yeah it will work.
Did you have to unbolt the sway bar for the shock extenders?
Only for the rear not the front..
@@AquinoRejectRides thanks man appreciate It in the middle of my lift kit
@@thatguysadventure4298 not a problem glad to help
Hi what lift kit did you use? I want to use the same for my 2004 z71 tahoe
Here is a link for the kit on Ebay
www.ebay.com/itm/131717372906?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=SkAxu7ZqSea&sssrc=2349624&ssuid=pwgoylqorzm&var=&widget_ver=artemis&media=SMS
Thanks man! I'll let ya know how it goes.
What size wheel and tires do you have
They're 33x12.50 R17 and the wheels are 17x9
I have a 03 suburban. It has air ride suspension in the back. Can I still put 2” blocks in the back or will the air ride suspension mess with that. Never messed with air ride suspension
Yeah it should be the same if you have air shocks because it will come with shock extenders is should automatically calibrate.
Aquino Reject Rides okay awesome thanks
I have 05 chevy tahoe and how did you get your spacers in did you struggle getting them in
I think I did a little, you have to loosen and push down the rear end, I think tgeres also a line that bolts on to the middle of the rear end that has to be loosened as well
Would that work for a 3 inch spacers cause that's what I have so I just need to push down on the rear end after I get everything disconnected
@@michaellynch8723 yeah it should might be easier to get a springs compressor. You can get them harbor freight cheap
Great video , did u max out the front key adjuster or how far did u crank it ? Im doing mine this weekend
Yeah crank them all the way...
How does it ride cranked all the way.
@@leezee5150 they ride like absolute shit, you see how his wheels are leaning out? Terrible on you tires and ball joints rides and looks like shit
How high did you crank the keys? Do you have the nivomat auto level rear suspension?
About a quarter inch from all the way up and yes it has automatic suspension but with the shock extenders it automatic adjust
What torque is recommended for the front shock extenders
59 ft-lbs
Did you have to put extender for shocks in back I haven't seen kits come with extenders for back
Yes I had to or you can get longer shocks...
@@AquinoRejectRides thanks i just have front key lift i went with bigger shocks the blistein 5100s hopefully its enough
@@leezee5150 yeah that should work if not you can always find the extenders on eBay
What size tires
33 x 12.50 17
WHAT SIZE RIMS AND TIRES ARE YOU RUNNING AND DO YOU HAVE ANY RUBBING ???
17s on 33x12.50....no rubbing...17
Do you have your keys turned up all the way?
Yes all the way..
For the rear shock extender brackets, where did you get them? Are they the same as the fronts?
You can get them on Ebay
They look the same but ones are little bit thicker than the other were they mount on
Where did you get the parts from
You can order it from eBay
I have 22's on my Yukon and would like to lift it just enough to get a taller profile AT tire but I still want to be able to get into parking garages so aint gonna happen for me. Might have to just go smaller rims. Oh well.
you might be able to go with 33's but you going to have to measure the parking garage see how high you can go
@@AquinoRejectRides I'm at the limit already. Some garages I go into my antenna hits the height caution bar at the garage entrance and I can see through my sunroof that I get really close to some plumbing pipes or something. Where I go sometimes parking is hard to come by and a parking garage may be my only option. I may just have to go smaller rims so I can get tire with a bigger sidewall profile so I can air them down a little. I have 285 45 22 all terrains and can't really air them down. I don't do serious off roading or anything, just sand, snow and some tore up rocky forest roads. No problem handling these conditions but would be nice to make the ride smoother and a little more traction.
One tire shop said I might be able to do a 2 inch leveling kit up front and another said 4 inch if I wanted go up one size in profile. I'm thinking 2 wont be enough.
@@bubbalo3388 man I will go with the bigger tire and just give me something smaller to go to the garages or a cheap daily....and just use the Yukon every now and then..so it can look clean...
@@AquinoRejectRides we were thinking about getting a Subaru Crosstrek also but it doesn't have enough room for the times I haul a lot of people or need trunk space. Think I might try and sell my 22's and see if I can get enough money to break even to get some 18's or something.
@@bubbalo3388 oh I got yyou...
What size wheels and tires are those cause I got the same color Tahoe
Wheels 17 and the tires are 33x12.50 17
@@AquinoRejectRides where did you get the kit??? I’m think about going 20s
I got it on Ebay.
Still holding up ?
How has the ride quality been since you did that?
It rides really good....just like stock..
@@AquinoRejectRides nice. Looks good man. I preferred the lower look on your truck but both looks are awesome! Thinking about doing something similar to mine.
@@nathangunz2590 Thanks...you should even if its little by little... its worth it..👌
What kit did you get
Look at this kit on Ebay
Look at this on eBay
www.ebay.com/itm/Full-Lift-Kit-Front-3-Rear-2-for-GMC-Yukon-Chevy-Suburban-Tahoe-2002-03-04-06-/274079082510?_trksid=p2349624.m46890.l49292
Awesome thanks.. how do she rides
@@garysmith3351 not a problem, it rides like stock because of the shocks extenders.
What kit did you use?
Let me look it up and I'll send you link
1/2 Look at this on eBay
www.ebay.com/itm/Full-Lift-Kit-Front-3-Rear-2-for-GMC-Yukon-Chevy-Suburban-Tahoe-2002-03-04-06-/274079082510?_trksid=p234962
What kit did u get an where from.
1/2 Look at this on eBay
www.ebay.com/itm/Full-Lift-Kit-Front-3-Rear-2-for-GMC-Yukon-Chevy-Suburban-Tahoe-2002-03-04-06-/274079082510?_trksid=p234962
I got one from eBay I will send you a link
👍👍👍👍👍👍😄
Hey did you install keys for the lift
Yes I did 3" tension keys
What leveling kit are you using?
Look at this on eBay
www.ebay.com/itm/184429129419
is that tahoe for sale?
Its actually my brother in laws I think hes going to part it out but not sure, was in a accident
@@AquinoRejectRides damn. hopefully he's good.
Looks perfect
Not too bad it you have the tools..