Nothing on video on how to tell if the compass calibration was complete, had to go to another video. If you don't get a message that it passed you didn't get it calibrated. If you get a failed message it need to be repeated.
My mini dji 4pro got stuck at 200 ft would not respond to the return to home camand. Finally the ran out of power an landed. Scared the crap out of me. What do you think happened. Please help 🙏
I noticed since I added blade guards and I command the drone to move backwards it will move back and to the left just a bit. I’m wondering if the weight if the blade guards is demanding recalibrating of the IMU and advice would be appreciated.
I crashed my mini 4 pro, it was with rc2 and after crash the view was visible but after few minutes the drone got disconnected, and now after repairing the physical damages the drone is still not getting into pairing mode or it is not getting connected to the remote
Problems with the IMU calibration. 1. Lay drone on flat surface... great, this works fine, we move on to position two 2. Lay it on its side. PROBLEM! It doesn't, The arms are all fully retracted, the propellers are all inboard... but it's like a table with a leg missing. Anyone?
Yeah I just went through this process for the first time myself so I'll try and help as I'm a brand new drone user myself and am also learning. Eventually it will stabalise on it's side and when it does and it's successful, the two green lights will commence flashing again which means it's calibrating. Focus on the image on the left side of your controller screen as this will depict what position it wants you to put the drone into for calibration. It takes a little bit of time but just be patient and you'll get it as well. Good luck!
@@liahalsall I ended up propping it up against a book, and it worked fine. If I don't prop it up, it wants to lie on a bit of a slant : / Having great fun with the Mini 4 Pro. So much fun that I just ordered a DJI Avata II (FPV). My credit card company loves me - but my wife, not so much right now XD
Video did not show calibration movements.
my drone in service... thanks for new posting
Nothing on video on how to tell if the compass calibration was complete, had to go to another video. If you don't get a message that it passed you didn't get it calibrated. If you get a failed message it need to be repeated.
Exactly. No insight on what to do if the calibration keeps failing. What video did you watch that helped?
what about the rc controller calibration?
Thank you four your video 😮
My mini dji 4pro got stuck at 200 ft would not respond to the return to home camand. Finally the ran out of power an landed. Scared the crap out of me. What do you think happened. Please help 🙏
I noticed since I added blade guards and I command the drone to move backwards it will move back and to the left just a bit. I’m wondering if the weight if the blade guards is demanding recalibrating of the IMU and advice would be appreciated.
Why do you need blade guards on such a small drone? Hope not to make the FAA happy.
@@benyosep5640 to protect the propeller from tree branches.
My drone will not recalibrate. It keeps failing
Hi how do you solve the vision sensors error
I crashed my mini 4 pro, it was with rc2 and after crash the view was visible but after few minutes the drone got disconnected, and now after repairing the physical damages the drone is still not getting into pairing mode or it is not getting connected to the remote
If you have any specific questions for us at Droneblog, please ask us in our community at DronePilots.com/
Nice explanation.but there is no coordination between the pictures in screen and what u say. There is a big delay
"follow the prompts"... ok I get it
Problems with the IMU calibration.
1. Lay drone on flat surface... great, this works fine, we move on to position two
2. Lay it on its side. PROBLEM! It doesn't, The arms are all fully retracted, the propellers are all inboard... but it's like a table with a leg missing.
Anyone?
Yeah I just went through this process for the first time myself so I'll try and help as I'm a brand new drone user myself and am also learning. Eventually it will stabalise on it's side and when it does and it's successful, the two green lights will commence flashing again which means it's calibrating. Focus on the image on the left side of your controller screen as this will depict what position it wants you to put the drone into for calibration. It takes a little bit of time but just be patient and you'll get it as well. Good luck!
@@liahalsall I ended up propping it up against a book, and it worked fine. If I don't prop it up, it wants to lie on a bit of a slant : /
Having great fun with the Mini 4 Pro. So much fun that I just ordered a DJI Avata II (FPV). My credit card company loves me - but my wife, not so much right now XD
I appreciate you showing us this but it really doesn't go through it in detail
this is so unhelpful. Already nervous because my drone don't work and lose few minutes on this video.
Nothing informative, already shows what is in the manual