Tháo quạt Turbo JisuLife Ultra 1 - JisuLife Ultra 1 Teardown.

Поділитися
Вставка
  • Опубліковано 5 чер 2024
  • Tháo hết xem nội thất quạt Turbo JisuLife Ultra 1 và lắp lại. Bạn có thể thay thế lõi pin hoặc vệ sinh phần cánh quạt. Nếu bạn chỉ cần vệ sinh cánh quạt thì chỉ cần mở nắp lưới hút.
    JisuLife Ultra 1 Teardown and reassemble. You can clean it and replace the battery cell if you can.
    If you only want to clean the fan blades, simply pry off the intake grid cover.
    #jisulife #teardown #fan #turbofan

КОМЕНТАРІ • 27

  • @squeeish
    @squeeish 2 дні тому

    Thank you! This helped me fix my fan that had hair stuck inside resulting in E6 error. If only there was a less destructive way to remove the fan grille cover.

    • @BXT_LAB
      @BXT_LAB  2 дні тому

      Thank you. But I see that is the only way to remove the grille cover, which is to pry it straight out.
      Pry carefully bit by bit and evenly each corner will be better.

  • @karlluissenir8648
    @karlluissenir8648 18 днів тому +5

    Thanks for sharing this video. When you pulled out the battery, it shows 4500mah. This fan is being advertised to have a battery capacity of 9000mah. Could it be that there are two 4500mah batteries in there? Or is the brand making a false claim here?

    • @neil7132
      @neil7132 18 днів тому +3

      It's got 2 21700 lithium ion battery at 4500 mAh each

    • @BXT_LAB
      @BXT_LAB  17 днів тому +5

      It’s 7.4V 4500mAh battery (with 2 cells 21700 4500mAh in series), in order to improve efficiency and charging speed. Equivalent 3.7V 9000mAh battery energy. The brand not lies but that is how they claim for bigger number battery capacity.

    • @karlluissenir8648
      @karlluissenir8648 16 днів тому

      @@neil7132 Thanks for this.

    • @karlluissenir8648
      @karlluissenir8648 16 днів тому

      @@BXT_LAB Ok, got it... Thank you!

  • @DaveChristopher-m2l
    @DaveChristopher-m2l 7 днів тому +1

    Please create a tutorial on how to disable or disconnect the annoying flash light. Thanks

    • @BXT_LAB
      @BXT_LAB  6 днів тому

      You can see at 10:08, there is a 2pin connector (Red and Purple wire), at the corner of the circuit. You open the battery handle and unplug it to disable the LED. Thanks for the comment.

    • @chihohenry
      @chihohenry 4 дні тому

      thanks for sharing. I want to disable the LED flashing light too.

    • @BXT_LAB
      @BXT_LAB  4 дні тому

      @@chihohenry Yep! It's a pretty redundant function. If it were replaced with a small lamp with flashlight function it would be much more useful.

  • @diekip
    @diekip 4 дні тому

    So the inside is impossible to clean, I’m returning mine tomorrow. Thanx

    • @BXT_LAB
      @BXT_LAB  3 дні тому +1

      @@diekip i think it's ok. Because the air intake mesh is quite good. Dirt will concentrate there. You can use a brush to scrub. In addition, I think the time spent using this blower is not long enough to get a lot of dirt.

  • @elleinad227
    @elleinad227 6 днів тому +1

    Thank you! I've been looking for this because my fan isn't working anymore. 😭
    The error message is 33 facing to each other😢

    • @BXT_LAB
      @BXT_LAB  6 днів тому +1

      I haven't seen the error screen yet. If you open it please disconnect the battery first. Good luck.

    • @elleinad227
      @elleinad227 5 днів тому

      @@BXT_LAB ty🥹

  • @9low719
    @9low719 18 днів тому +1

    đừng chèn nhạc lm theo kiểu asmr ý bro dễ xem hơn

    • @BXT_LAB
      @BXT_LAB  17 днів тому

      Cảm ơn bạn đã góp ý.

  • @xmrhat6302
    @xmrhat6302 14 днів тому +1

    can you do jisulife life 7?

    • @BXT_LAB
      @BXT_LAB  13 днів тому

      Maybe in the future i will bought it and make a teardown video. Thank you.

  • @kyleyulatris5738
    @kyleyulatris5738 15 днів тому

    Can you do the fa42

    • @BXT_LAB
      @BXT_LAB  15 днів тому

      I did it, check out my video.

  • @marlou4797
    @marlou4797 16 днів тому

    Next jisulife f8

    • @BXT_LAB
      @BXT_LAB  16 днів тому

      Sorry, I don’t have that one.

  • @ceesparxxx
    @ceesparxxx 16 днів тому +1

    Assuming you can actually find that kind of battery already ready to go, replacing the battery doesn't seem nearly as hard as I originally thought lol.
    Update: So after looking around, I couldn't find any batteries that meet the exact specifications of this device. So I guess replacing the batteries can not be done :(.

    • @BXT_LAB
      @BXT_LAB  16 днів тому +1

      You can completely replace the battery cell inside if you know how to connect and solder battery. Specs do not need to be exactly the same as the old one, you can replace better battery cells from Samsung or LG, Molicell. 4500mAh or even 5000mAh cells.

    • @ceesparxxx
      @ceesparxxx 16 днів тому

      @@BXT_LAB The key phrase with what you said, is: "if you know how to....." Lol. I don't know how to lol. But I would love it if you could point me in the direction of a "how to" video about it lol.