Відео

If I have 100,000 subscribers, I will definitely teardown all of them for you guys, LOL.

It's the same fan, just the handle is different. But I'm sure it will be more difficult to open than this model.

@@thinhphatnguyen1254 anh thì không nhận sửa nhưng mà em có thể làm theo như Video, tháo ra kiểm tra. Có trường hợp nó bị gãy cốt motor dẫn đến lắc hoặc xoay là cánh quạt nó cạ vào vỏ. Hoặc vòng bi có vấn đề.

@@user-pv3tl9fe8o 謝謝。該油脂旨在防止電路受潮，或如果 100% 密封，則可以防水。如果下雨或掉進水里，它可以保存我風扇上的電路板。

@@user-pv3tl9fe8o 乾燥後，它會像橡膠一樣堅硬。

@@BXT_LAB 感謝解說，那麼這款風扇的品質您建議購買嗎?

@user-pv3tl9fe8o 我覺得它的品質還可以。但風大時噪音較大。你可以考慮一下。

😘😘

Yes, some deep small slots in the fan cage are hard to reach.

Thank you. But I see that is the only way to remove the grille cover, which is to pry it straight out. Pry carefully bit by bit and evenly each corner will be better.

@@-aquatheweirdo-1234 i did it, bro. Please check out in my Channel.

@@-aquatheweirdo-1234 this video ua-cam.com/video/O_fSYXWIPi4/v-deo.htmlsi=2FobK27usiZ0QIxl At 1:25.

@@diekip i think it's ok. Because the air intake mesh is quite good. Dirt will concentrate there. You can use a brush to scrub. In addition, I think the time spent using this blower is not long enough to get a lot of dirt.

Thank you for your comment, so that is the issue of warranty and exchange. Mine will have to use more time to see how it goes, currently it's still good.

Thank you. I've heard many people talking about the scroll button issue. But mine still doesn't have any problems even though I use it like crazy. You can open it up like in the video, it has a small component with a rotating hole (similar to the structure in a computer mouse). You can check the appearance or use RP7 spray on it to see if it fixes it. Or maybe not the scroll component, but the control chip.

Just finished diassamble it, looks like the controller chip, I'm very sad abt this 😢

@@kamilriyadi6587 my brother also has one pro 1S, his one has a very weird problem. The screen never turn off. I said him to disassemble (all the connections) and reassemble it. And the problem gone. I think the control chip has been reset after that, and fixed it self😅😅😅

Sorry, I don't see this model for sale at my place🥲

@@BXT_LAB Jisulife f13p fan is a top sale product. This fan is famous for oscillating and folding.

I'm currently in Japan and all the JisuLife fans I bought were from Amazon JP. But there is no table fan model F13P, which is a bit disappointing.

If you want to open it, in JisuLife's user manual they usually have instructions to open it to get the battery.

@@BXT_LAB Please search this model in Google.

I haven't seen the error screen yet. If you open it please disconnect the battery first. Good luck.

@@BXT_LAB ty🥹

You can see at 10:08, there is a 2pin connector (Red and Purple wire), at the corner of the circuit. You open the battery handle and unplug it to disable the LED. Thanks for the comment.

thanks for sharing. I want to disable the LED flashing light too.

@@chihohenry Yep! It's a pretty redundant function. If it were replaced with a small lamp with flashlight function it would be much more useful.

Em mở ra xịt một ít RP7 vào xem sao. Còn nếu mà hỏng hẳn thì anh thấy con linh kiện lăn đấy giống trong chuột máy tính, nếu mà cùng package với size thì thử thay xem, phải có hàn hoặc thợ điện tử làm nhé.

@@BXT_LAB nó không hỏng hẳn anh ạ nó bị đơ đơ lâu lâu vẫn lăn được nhưng rất khó khăn ạ

@@tongtrieu4710 em kiếm cái bình xịt RP7 xịt vào đấy xem có đỡ không?

Chào bạn nhé. Họ muốn nhanh mua cái mới ý mà😂😂

Haha😂, i just did it one more time to make the video.

Thank you for your comments. However, it uses ultrasonic welding all the way around, so opening is very difficult. Just like phone chargers.

Rút gọn hơi nhiều😅

Không bạn ạ, muốn vệ sinh phải phá mở quạt. Với cái này không mát mấy, khá ồn, cộng thêm không có báo pin theo vạch hoặc % nên khá tù mù. Mình mua để tháo chơi thôi😅

​@@BXT_LABsao thấy ae dân chơi khen quạt của Jisulife lắm mà bạn nhỉ. Nhà tôi có vài cái tự độ chế lại từ chiếc super dùng ngon phết, mỗi tội kích thước nó hơi cồng kềnh. Có khả năng cái này phù hợp dùng đi ngoài trời, chứ trong nhà nó ồn như máy sấy tóc vậy sao chịu được.

@@minhbinh4451 chất lượng ok đấy bạn ạ, nhưng mà có nhiều người kêu là cái chỉnh tốc độ gió trên Pro 1S bị hỏng. Còn cái FA42 này nó bé gọn thật nhưng lực gió không đủ lắm. Mấy con JisuLife của mình thì tháo hết ra phủ keo lên mạch, nhỡ có dính nước hay ẩm ok hơn.

@@minhbinh4451 độ chế thì biết nó ra sao, hỏng đâu sửa đấy, nhưng mà độ đẹp với cả thiết kế thì lại thua hàng mua sẵn😅😅

@@BXT_LAB đúng rồi bạn ạ, dù sao nguyên zin của nó mà hàng chất lượng thì vẫn hơn, ngta thiết kế đã tối ưu không gian. Hàng độ chế thì dành cho ae đam mê, thích vọc vạch thôi chứ hoàn thiện không bằng được.

Maybe in the future i will bought it and make a teardown video. Thank you.

I don’t have that one.

I did it, check out my video.

You can completely replace the battery cell inside if you know how to connect and solder battery. Specs do not need to be exactly the same as the old one, you can replace better battery cells from Samsung or LG, Molicell. 4500mAh or even 5000mAh cells.

@@BXT_LAB The key phrase with what you said, is: "if you know how to....." Lol. I don't know how to lol. But I would love it if you could point me in the direction of a "how to" video about it lol.

Maybe the problem is in the bearings, Jisulife doesn't have any lubricant in the bearings. So I think the lifespan will not be high if it is a cheap bearing.

@@BXT_LAB is it repairable? My friend told me that it might be just the fan blades hitting on the inner part of the fan Do you think that by just adjusting the blades would fix the issue?

@@cdgarcia5969 Yes, of course it's due to the propeller hitting the inside. But the cause may be due to the bearings, or the rotor shaft being misaligned. It can be fixed if you know how.

⁠@@BXT_LAB I’m curious, does the coil separate from the plastic that holds the machine?

@@cdgarcia5969 Oh, so yours has broken off the motor base. You can use super glue to reattach it, but be careful to keep it aligned and not stuck by the glue. I think it might be because you dropped it quite hard.

Theo thông số thì bản pin 4500mAh này dùng được 4.5-16h nhé bạn. Bản pin 2000mAh thì giảm hơn một nửa.

Sorry, I don’t have that one.

If there are no replacement parts, your only option is to buy a new one.

It's got 2 21700 lithium ion battery at 4500 mAh each

It’s 7.4V 4500mAh battery (with 2 cells 21700 4500mAh in series), in order to improve efficiency and charging speed. Equivalent 3.7V 9000mAh battery energy. The brand not lies but that is how they claim for bigger number battery capacity.

@@neil7132 Thanks for this.

@@BXT_LAB Ok, got it... Thank you!

Cảm ơn bạn đã góp ý.

What model is it? You can see instructions for opening the battery in the user manual.

Yes, it’s two cells Li-ion 18650 in series. (7.4V 2500mAh) equal 3.7V 5000mAh.

Sao hơi đen thế bạn? Có thể do bạn chạm mạch chỗ nào đấy khiến IC chết hoặc cái dây ở motor bị đứt. Màn hình còn hiển thị không bạn?

I’m thinking about it! Thanks!

Does it have e6 error meaning in the manual? I don’t know what is e6 about.

Does its screen still on when not running?

@@BXT_LAB, it is off and the light indicator is also off. But even if I charged it, once I did not use it for days it will just drain by itself.

@@soliszyrahmae5441 Even when you turn off the back switch?

Wait I also have this issue, mine also drains it’s battery when I’m not using it

@@carenthusiast228 even when you turn off the rear switch?

Sorry, but i don’t have one.

I ordered it and it on the way. Subscribe and wait for the video, thank you very much!

If you drop it in water, the electronic parts will fail first. There is no other way but you have to buy another one.

@@BXT_LAB thats what i think. Thx so much!

It sounds bad that when it comes out of the box it doesn't work☹ I guess it was due to shipping damage or they had a problem with quality control. Normally when the fan starts it also makes a knocking sound when the motor starts to rotate. That is the special sound of this Jisulife fan with this 3-phase motor. The problem of it not rotating could be due to the speed control circuit or a problem with the motor. This requires opening it up to figure it out.

@@BXT_LAB yeah, the device was damage, i already consulted to customer service and they gave me a replacement, i have to wait again for a week to arrive.

I bought 3 of these Pro 1S. But one of them has a poorly balanced fan blade. When running below 30% speed, it vibrates a bit, so when placed on the table, the noise is a bit annoying. The rest is no problem.

Pin 2S 7.4V 2500mAh, cell 18650 nhé bạn.

Nếu mà nâng cấp lên cell 3000-3400mAh thì ngon luôn😄

You must find the start of copper winding and resoldering it. It is 3 Phase BLDC motor, so it has 3 wire red, black and yellow connected to three ends of the copper windings.

Can you send me a pic of yours? I cant seem to figure it out

Or is there a replacement i could order or do i need to rewind the motor myself?

@@enzzy6880 You dont need to rewind the motor, but you just only find the copper end of one phase and solder it to the wire which is it broke from.

Mine still works fine. However if yours is broken. You can open it, it's exactly like the mechanism in a computer mouse. If you have electronic engineering expertise, you can repair or replace it. You can watch my full teardown video: ua-cam.com/video/3nFB7P2S6kw/v-deo.htmlsi=pNVYlq9mblyZydT8

Maybe it's rolled around too much. First, you can try using an electronic component cleaning spray for the Volume adjusting position.

You can watch my Video. I disassembled all of it. ua-cam.com/video/3nFB7P2S6kw/v-deo.htmlsi=YqOg2oC7WoD35nTh

You need to know which component is damaged? And how to fix or replace it.

@@BXT_LAB i teardown my fan the way you did and saw that the wiring on the fan was broken/cut off. hoe do i fix that?

@@eulahrisse You can resoldering it if you know exactly which wire it broken from. Or you can go see an electronics technician (some one who understands electronics and has soldering equipment).

You need to disassemble the fan blade if you want to wash it separately. If you wash the entire motor assembly, you may damage the electronic circuit.

@@BXT_LAB thanks for sharing. This’s very useful.👍🏻

Thank you very much, I see quite a few people want to clean its fan blades. And it's simple if you know how. So I want to show you the simplest way.

@@BXT_LAB I’m one of the people who wanted to know how to do this, so I searched on GG and found your clip. You disassembled all the parts, and it looked very easy. I'll try doing it and see if it's as easy as you make it look. Lol

This requires experience, thinking, and some skill. There are things that if you are a normal person, you will not be able to understand where they start to disassemble. But if you have experience, you will slowly figure it out. Sometimes I'm a little worried that if I break it, I'll lose money, lol.

Can you use English please?

It’s ESD-13 tweezer. You can buy it on Amazon. They’re quite cheap.

If you don't have that tweezer, you can use the tip of a knife. It must be hard enough and thin and small.

I’m thinking about it😂

I haven't bought that one yet, but you can watch this video ua-cam.com/video/19z82oS3Ye4/v-deo.htmlsi=2wlBO0wxNLTHn8cu