Hori sheet sun! DJI is on a roll now. To think that they started as a flight company building parts and drones to now making amazing products for videography. Instead of going the cheap route, they know about quality of the products and the features as well to suck us all in. Definitely picking up the combo kit as it has a lot to offer.
@@JasonMorrisphotocinema oh yes. This new dji SDR likely could solve my EVF screen recording situation. I wouldn't have to attach my atomos ninja to my cameras anymore but rather just the SDR transmission to lighten the load.
If I have 3 transmitters attached via HDMI to three different devices [say 1 x Camcorder, 1 x DSLR and 1 x Drone RC], do I need three different receivers attached to my PC to pick up their signals or can I use just 1 receiver to pick up the 3 signals?
@@JasonMorrisphotocinema thank you! 🙏🏼 been wanting to upgrade the raven eye on the rs4 pro and I think this is a strong contender especially since I do a lot of shoots with my car rig and sometimes have to shoot while driving
Great video 🙌 I just saw Hollyland came out with a similar system, but there system allows you to stream using the receiver via USB C using UVC protocol. Do you know if this DJI system can do it? Its an instant buy if it can, as I use this for my day job and content creation as well.
It’s my prayer that you try this setup and film outdoor sports, mounting the RS Gimbal on a tall stand and chase action from the ground by utilizing the Force Mobile feature.. I don’t know about how to control the Zoom motor attached to the gimbal or should use a separate wireless Focus/Zoom Control System.
@@johnnyweissmuller5838 you can only say no latency difference when it is tested though. When dealing with electrical current and two different devices we never know if it can change things until it’s tested
@@JasonMorrisphotocinema Latency only happens when the signal is processed through electronic components. A cable splitter only transfers the signal from one cable to 2 outputs. There is no processing so there is no latency.
@@JasonMorrisphotocinema I meant on the receiver end. You only used the iPad's USB-C out which could add extra delay since it runs through djis app instead of testing the hdmi out on the rx end.
How is this practical if it removes functionality of the gimbal?? ActiveTrack is not supported??... DJI: "When connected with devices such as RS 4 Pro, RS 4, and RS 3 Pro, DJI SDR Transmission can be powered through the gimbal and enables Force Mobile, virtual joystick, gimbal recentering, and more functions. Please note that when the DJI SDR Transmission Transmitter is connected to a stabilizer, the multi-camera control cable from the stabilizer's combo must be used, and ActiveTrack will not be available. Additionally, when the DJI SDR Transmission Transmitter is connected to a stabilizer via the adapter plate, a native vertical shooting setup is not supported."
How bad would it be to go hdmi out of camera into hdmi of monitor, hdmi out of monitor into the dji sdr transmitter? If this use case is as bad as you suggested, then I guess I'll consider getting a hollyland or something else that has hdmi in AND out so I can plug the monitor into that.
The reason is because those reviewers did what he mentioned. They went camera to monitor to then transmitter. Where as Jason is correct, you want to go camera to Transmitter then monitor. Surprisingly, a lot of people go monitor first when I show up on set and I always have to correct it .😅
@@KofiYeboah interesting. I haven’t seen your video. Did you do a count down timer test like him to see for yourself or it’s just what DJI told you? I wonder if there is a specific mode to get this speed
No, I have the RS2 and we need the Raveneye (I currently own) and I'm gonna buy just one transmitter $309 to send signal from the camera to any iOS device nearby...
Hori sheet sun! DJI is on a roll now. To think that they started as a flight company building parts and drones to now making amazing products for videography. Instead of going the cheap route, they know about quality of the products and the features as well to suck us all in. Definitely picking up the combo kit as it has a lot to offer.
they are killing the game
@@JasonMorrisphotocinema oh yes. This new dji SDR likely could solve my EVF screen recording situation. I wouldn't have to attach my atomos ninja to my cameras anymore but rather just the SDR transmission to lighten the load.
Ordered it as soon as it came out.Just what the doctor ordered at a great price.
that's great. Definitely my favorite video transmitter!
If I have 3 transmitters attached via HDMI to three different devices [say 1 x Camcorder, 1 x DSLR and 1 x Drone RC], do I need three different receivers attached to my PC to pick up their signals or can I use just 1 receiver to pick up the 3 signals?
Great video Jason! Quick question ? Since it uses the DJI app, would it be able to use active track like the raven eye?
This I am not sure of and haven't tested. I will try get to this
@@JasonMorrisphotocinema thank you! 🙏🏼 been wanting to upgrade the raven eye on the rs4 pro and I think this is a strong contender especially since I do a lot of shoots with my car rig and sometimes have to shoot while driving
Will be great if there's quad view on the ipad when shooting with multiple cam for interviews. That means multiple TX connect to 1 RX.
Welcome to the future baby! Pretty cool but too much for filming toasters like I do lol. Awesome Video!
hahahaha. Don't worry, I have a video coming for you. It starts with an L and ends with an X.. hehe
@@JasonMorrisphotocinema Sitting on the edge of my chair! Don't fall in love lol
Same range as the dji transmission?
This Transmitter will cast a boom in the market, 3 miles avaliable using SDR
Great video 🙌 I just saw Hollyland came out with a similar system, but there system allows you to stream using the receiver via USB C using UVC protocol. Do you know if this DJI system can do it? Its an instant buy if it can, as I use this for my day job and content creation as well.
What is the aspect ratio you use? Great video!
2:1 great for watching on phones
Wow! Can this be use on Facebook live broadcast?
Check out OBS you might be able to do it.
Hello Jason,
Can u control Sony camera directly thru the RX and TX units and monitor, without the ronin app ?
It’s my prayer that you try this setup and film outdoor sports, mounting the RS Gimbal on a tall stand and chase action from the ground by utilizing the Force Mobile feature.. I don’t know about how to control the Zoom motor attached to the gimbal or should use a separate wireless Focus/Zoom Control System.
How is LUT support on the iPad?
how many ipad can connect via wifi?? please answer
9:06 are using WiFi or tx/rx
There are also hdmi splitter cables if you need 2 hdmi ports out from camera
Nice. I personally haven't used this plus I haven't used it with these kind of transmitters so I can't speak on latency or reliability of connection
@@JasonMorrisphotocinema it just connects 2 wires to 1 wire so there is no latency addition for a hdmi splitter
@@johnnyweissmuller5838 you can only say no latency difference when it is tested though. When dealing with electrical current and two different devices we never know if it can change things until it’s tested
@@JasonMorrisphotocinema Latency only happens when the signal is processed through electronic components. A cable splitter only transfers the signal from one cable to 2 outputs. There is no processing so there is no latency.
Looking into the Transmission combo, I don't think it comes with the ipad/phone holder included. Can you confirm please?
Does this work with their drone camera technology?
Transmitter might be too heavy for certain drones.
Is it possible to perform Force Mobile motion control and still control the Zoom motor attached to the gimbal?
can i use only the transmitter to connect my ipad pro?
Yes, I'm gonna do tha! Just buy the $309 transmitter and send the signal thru wifi to any iOS device nearby... 🤩
how many ipad can connect via wifi?? please answer
RS3 compatible?
Aloha! Do you know if you can run 2 cameras/ transmitters to one receiver? Thanks for your video!
I am not sure to be honest. I don't have 2 transmitters to test
Thanks, I imagine we would need software to split the screen or a switch mechanism
got one but the fan noise on the TX is super loud - hopefully it's just a dud
You posted the same comment on several YT reviews of it.
@@mingouczjcz3800 i know - I was trying to get different people's perspectives.
An HDMI out would be really great but it´s still crazy for this price
yeah definitely would have been nice to be able to attached camera to transmitter then to monitor
i thought you had this on a red. trying to find a semi budget system for my komodo
This will work perfectly fine on the red
Can you use the TX on a camera shooting 4K 30? Will it just down convert?
it will just convert the image to 1080p which should suit almost every situation
Does it also work with the RS 3?
I am not sure. I sold my RS3 gimbal. But I paired it through the raven eye on the app which RS3 had raveneye
So dji advertises 35ms and 100ms over wifi and you measured 200ms? You didn’t measure the latency over hdmi out though.
I measured latency with HDMI out, SDI out and WiFi. The FX6 has both HDMI and SDI outputs which was tested
@@JasonMorrisphotocinema I meant on the receiver end. You only used the iPad's USB-C out which could add extra delay since it runs through djis app instead of testing the hdmi out on the rx end.
Yeah I see what you mean I'd like to see it go straight into a directors monitor instead of into an iPad :) @@MrCoffis
How is this practical if it removes functionality of the gimbal?? ActiveTrack is not supported??... DJI: "When connected with devices such as RS 4 Pro, RS 4, and RS 3 Pro, DJI SDR Transmission can be powered through the gimbal and enables Force Mobile, virtual joystick, gimbal recentering, and more functions. Please note that when the DJI SDR Transmission Transmitter is connected to a stabilizer, the multi-camera control cable from the stabilizer's combo must be used, and ActiveTrack will not be available. Additionally, when the DJI SDR Transmission Transmitter is connected to a stabilizer via the adapter plate, a native vertical shooting setup is not supported."
How bad would it be to go hdmi out of camera into hdmi of monitor, hdmi out of monitor into the dji sdr transmitter?
If this use case is as bad as you suggested, then I guess I'll consider getting a hollyland or something else that has hdmi in AND out so I can plug the monitor into that.
I tested this in the video in the latency test
01:18 * cries in Australian dollars *
Crazy they told me it was 80ms, and you’re getting 20 and 28 ms!
yea interesting, im wondering which one it is.
The reason is because those reviewers did what he mentioned. They went camera to monitor to then transmitter. Where as Jason is correct, you want to go camera to Transmitter then monitor.
Surprisingly, a lot of people go monitor first when I show up on set and I always have to correct it .😅
@@Redm0ndFilms I went from cam right to transmission, but it was over HDMI 😅🫡
@@KofiYeboah interesting. I haven’t seen your video. Did you do a count down timer test like him to see for yourself or it’s just what DJI told you? I wonder if there is a specific mode to get this speed
@@Redm0ndFilms I did after the fact, didn’t make the video (Toronto basically flooded and the power went out) I’ll post in a UA-cam short today !
did you just tell us where you live man XD?
every video youtuber posting the same video
that is how an embargo and NDA works. Happens in a lot of different industries not just the camera market
does this work with rs2?
I am not sure. I don't own the RS2. But if you can use raven eye on the RS2 I paired it through the raven eye on the app
No, I have the RS2 and we need the Raveneye (I currently own) and I'm gonna buy just one transmitter $309 to send signal from the camera to any iOS device nearby...
Do you know if the usb C monitoring works from the transmitter to use as a monitor on any phone or does it has specific requirements