This Ender 3 is Completely Different.

Поділитися
Вставка
  • Опубліковано 20 лют 2024
  • We are checking out the Ender 3 V3!
    Thanks to Creality for providing this printer free of charge.
    Check out the Creality Ender 3 V3 here: shareasale.com/r.cfm?b=201599...
    Bed Adhesive for smooth surface finish printed directly on spring steel lukeslabonline.com/collection...
    My Store: nathansellsrobots.com
    Patreon: / nathanbuildsrobots
    Discord Channel: / discord
    Podcast: www.perfectfirstlayer.com
    Best Printers:
    Creality Ender 3 SE V3 SE: shareasale.com/r.cfm?b=201599...
    On Amazon: amzn.to/44bVqCU
    FlashForge Adventurer 5M Pro shareasale.com/r.cfm?b=242344...
    SAD5 for $20 off 5M, SD5P for $20 off 5M Pro
    Creality K1 Max: shareasale.com/r.cfm?b=237420...
    Elegoo Neptune 4 Plus shareasale.com/r.cfm?b=235104...
    The links in this video description are affiliate links. I may earn a commission based on sales through these links.
  • Наука та технологія

КОМЕНТАРІ • 344

  • @AnotherDud3
    @AnotherDud3 4 місяці тому +82

    year: 2234
    Ender 3 v7986 releases

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому +18

      CoreXYZBBQ with AI predictive printing. It prints what you'll want tomorrow, today!

    • @Liberty4Ever
      @Liberty4Ever 4 місяці тому +1

      Meh. I'm holding out for the Ender 3 v7988 SEx.

    • @TS_Mind_Swept
      @TS_Mind_Swept 3 місяці тому +3

      ​@@NathanBuildsRobots BBQ? They're printing fully prepared meals now, too? 👀

  • @elchavode6479
    @elchavode6479 4 місяці тому +117

    Creality really need to come up with Better numbering system V3, v3 Ke, V3 SE, etc is starting to get confusing lol

    • @oyvey304
      @oyvey304 4 місяці тому +8

      Can’t wait for the Ender 3 69420 KE

    • @aeonjoey3d
      @aeonjoey3d 4 місяці тому +5

      Ender 3 8K 5G AI SE PRO S

    • @elchavode6479
      @elchavode6479 4 місяці тому +4

      @@aeonjoey3d is that before or after the Ender 3 5k ABZ SE?

    • @andreamitchell4758
      @andreamitchell4758 4 місяці тому +1

      Is there any reason to buy this printer over a K1?
      Because the K1 was on sale around BF for $350 and the V3KE is like $270
      Hard to see how this printer will come in at less than $350 and more than $270.
      It really doesn't leave much room price wise.
      I am really curious what this model and the K1 And V3 KE will be selling for next BF.
      Especially with new K series about to be released too.
      This is a great time to wait it out

    • @ALPHABEASTACE
      @ALPHABEASTACE 4 місяці тому +1

      They Wil never drop the iconic ender 3 name

  • @huzbum
    @huzbum 3 місяці тому +6

    That's probably the best 15 minute benchy I've seen.

  • @oldman1944
    @oldman1944 4 місяці тому +65

    This looks like it's come out of a completely different factory to the KE. A much better factory.

    • @martinskamla6789
      @martinskamla6789 4 місяці тому +7

      What’s wrong with the KE ?

    • @JuanCarlos_3design
      @JuanCarlos_3design 4 місяці тому +4

      @@martinskamla6789 ALL.... the KE and SE also, has a flaw from fabric, that the right bed rod, it doesn't fit well and it dances, apart from that, the Z axis is the most inconsistent thing I've seen in a long time, the base plate itself bends...

    • @Ash-lq6dl
      @Ash-lq6dl 4 місяці тому +1

      @@JuanCarlos_3design Mine's a complete mess. the KE is getting sent back beds warped and nothing but issues.
      Was fine for the first week but the bed started to warp assuming from the insulation design on the bottom

    • @bl4de938
      @bl4de938 3 місяці тому +1

      You are saying that because you have never tried this printer, this printer is piece of "something". I don't understand why so many good reviews about it when all of them know this thing is just wasting of money. KE is amazing printer, it's better option then this for way less money. This new V3 can't do good first layer, cooling fan is not good enough for harder prints, it's hard to load filament in it, you can't adjust zoffset manually until prints starts, you can't see auto leveling results at all to see how uneven your bed is.... I had SE, now i have KE and new V3, this last one is a huge fail, only good things about it are looks and nice screen.

    • @oldman1944
      @oldman1944 3 місяці тому +1

      @@bl4de938 I do own one so I feel qualified to comment on the build quality. And the V3 having all the flaws you list doesn't make the KE any better. Creality need to step up their QC or they will not survive.

  • @DM-fz3ly
    @DM-fz3ly 2 місяці тому +4

    Dude! you are by far the best reviewer I have watched! Very good commentary and excellent on point review. thanks!

  • @3DPrintSOS
    @3DPrintSOS 4 місяці тому +25

    This is a dope machine. I loved finding a few of the little surprises like the new boards and the AUX fan. Creality is stepping up in my opinion. This thing feels FRESH.

  • @3dScience8
    @3dScience8 4 місяці тому +72

    CREALITY NEEDED BAMBU LAB
    (to start making decent 3d printers).

    • @TS_Mind_Swept
      @TS_Mind_Swept 3 місяці тому +12

      I feel like everyone has started making better printers after bambulab came in and shook the market like they did

    • @dankcincy
      @dankcincy 3 місяці тому

      Completely changed the direction the entire market was going, its not just Creality. Everyone is stepping their game up now which we will all benefit from.
      What's going to be fun to watch is all the Bambu fan boys getting butt hurt when other companies start making better machines that are actually open source as they should be and not the stupid closed off walled garden proprietary ecosystem bs that Bambu has been getting away with.

    • @TS_Mind_Swept
      @TS_Mind_Swept 3 місяці тому

      @@dankcincy What you don't seem to have noticed is that they've been becoming more open source lately, and while I'm definitely not in favor of donut walling modifications to things ((coughcrapple)), it's not like their printers need masses of upgrades to work optimally either (also the first part of what you said was said immediately before you said it)

    • @dankcincy
      @dankcincy 3 місяці тому +1

      @@TS_Mind_Swept You're right, I haven't noticed. As soon as I saw it was a closed ecosystem, I never gave them a second look. I'll never buy anything in this space that's not opened up. Closed ecosystems go against everything 3D printing is about.

    • @TS_Mind_Swept
      @TS_Mind_Swept 3 місяці тому

      @@dankcincy well I can tell you one thing, you're more closed than they are, and not for any good reason

  • @wforider4786
    @wforider4786 4 місяці тому +5

    Thanks for another quality video appreciate your input

  • @hansvdz5834
    @hansvdz5834 4 місяці тому +24

    10/10 roast on the strain relief.

    • @Liberty4Ever
      @Liberty4Ever 4 місяці тому

      Nathan only mentioned Bambu Lab by name in a positive light in this video. I think he's hoping Bambu starts sending him review printers. 😛 The burn on the sparking heater cables was by inference but most of us knew he was talking about the big bam boo.

    • @brnl62
      @brnl62 4 місяці тому +1

      ​@@Liberty4Everyou're not serious I assume? Watch again if you are..

  • @skunkprints7952
    @skunkprints7952 4 місяці тому +26

    NATHAN IS THEE SOURCE FOR NEW PRINTER INFORMATION! What a CHAD! 😂

  • @stew675
    @stew675 4 місяці тому +19

    Overhang at 30 degrees is likely related to the overhang print speed for that angle being too high. At 20 degrees it's probably hit the next speed category and slowed down further, same with 15.

    • @Liberty4Ever
      @Liberty4Ever 4 місяці тому +1

      PrusaSlicer has Dynamic Overhang Speed settings so the speed can be varied for 0%, 25%, 50% and 75% overhangs.

    • @stew675
      @stew675 4 місяці тому +1

      @@Liberty4Ever Yes, exactly that sort of thing. I've never used CrealityPrint, but I'd be surprised if it wasn't doing something similar, and for whatever overhang range speed "bucket" setting that the 30° overhang fell into, it's likely the settings for that bracket group needs to be tweaked better.

    • @Tristaniscool
      @Tristaniscool 3 місяці тому

      What setting are you using? I just found this setting in creality print. I'm betting thats why I'm having issues with overhangs...

  • @3DandTeePrinting
    @3DandTeePrinting 4 місяці тому +3

    Man this Machine Whips around. Zippy is the best way to say it. Got the first 24 hours of printing on it done. Really impressed with quality of the prints at speed. You said it best @27:18 It's a Bedslinger K1 with some updates.

  • @aberodriguez4149
    @aberodriguez4149 4 місяці тому +2

    Thanks for sharing this review, liked the ease of operation since I am not the type to mod 3D Printers. 👍👍👍

  • @sheikoner
    @sheikoner 4 місяці тому

    Youre reviews are the best! Thanks for the video!

  • @DrZylvon
    @DrZylvon 4 місяці тому

    thanks for the extensive first look !

  • @Dimitris1963
    @Dimitris1963 4 місяці тому +6

    Thanks, nice video! Miss the original “first layer test” though! That was more telling than the repeated comment about the print bed cable! ;)

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому +5

      First layer was looking pretty good. I did one on a livestream

    • @Dimitris1963
      @Dimitris1963 4 місяці тому +3

      @@NathanBuildsRobotsI know, I was following it and saw you at 2:20:00 (timestamp) a bit confused with the result, which you attributed to changing the settings mid-print. By the way: Does the printer have "power loss recovery" or not (it didn't work in live)?

  • @destinal_in_reality
    @destinal_in_reality 4 місяці тому +4

    Nice video! Yeah it's been shown that Creality's nebula cam works out of the box which should mean k1 camera also works out of the box and also any random webcam should work if you get root and make some boot script changes

  • @peteranderson3232
    @peteranderson3232 4 місяці тому +2

    Hi Nathan! In your "wrap up" you sound exactly like myself. "I just got fed up with them", or something like that. I now have an E3V3KE, and I am super happy with it. At least for now, but I will look more at this E3V3. It has a shorter name anyway.😀

  • @dougshellusn
    @dougshellusn 4 місяці тому +3

    Also, tolerance test don't matter until after extensive dimensional accuracy validation

  • @gman9543
    @gman9543 4 місяці тому

    Finally! A properly QA'd and tested product from Creality that will print out of the box without having to "mod" it first. They're finally catching on after watching Bambu eat their lunch.

  • @jjlee196
    @jjlee196 4 місяці тому +1

    Now that's how you make an entrance. Please make the hair-flip intro your siganture move from here on.

  • @duralisis
    @duralisis 4 місяці тому

    Very thorough as always. This is the first Creality printer to geab my attention in a while. Got one ordered. Curious about the nozzle situation - couldn't find replacements to order yet or a 0.6mm.

  • @Tech_average22
    @Tech_average22 4 місяці тому +36

    I hope creality does a multi material system of some sort. Would be interesting.

    • @tubekau
      @tubekau 4 місяці тому +4

      Some youtuber went to recent creality booth, the agent said, the going to release new multi filament/color printer, AND also multi color/filament for currently existing printer. Soon this year

    • @ZappyOh
      @ZappyOh 4 місяці тому +3

      That is precisely what I'm waiting for.
      Once it's here, I'll buy a K1Max + multi-material thingy.
      But, why are they taking so long ?

    • @ServentofTheMostMerciful
      @ServentofTheMostMerciful 4 місяці тому +4

      I asked them personally, they told me they were working on it with a release planned for 2024.

    • @markm49
      @markm49 4 місяці тому +7

      @@ZappyOhbecause it’s not easy to do. Prusa tried for years and failed. Bambu changed the 3d printing world with the AMS. Now they are all scurrying to catch up.

    • @AndrewAHayes
      @AndrewAHayes 4 місяці тому +5

      Being an owner of an AMS I hate the massive wastage involved and would much rather have an affordable and working well toolchanger system

  • @BBLX1C
    @BBLX1C 4 місяці тому

    Really really good review. I am surprised seeing creality catching up or maybe even top the A1! But when can we get the Anycubic Kobra 2 Max review?

  • @deucedeuce1572
    @deucedeuce1572 2 місяці тому

    I've been waiting for a round 3d printer (round track) with a hotend that can tilt, so just about every surface can be a top surface and can be ironed (except the bottom surface, but that don't need to be ironed). You could also print perfect circles with it and make parts with no layer lines. I think it would greatly increase maneuverability and printability without having to add more axes (axis plural) and more motors. I think an excellent design could be done with 3 motors/axis. Could do X-Y and rotation with 2 motors and the tilt would be a 3rd, even though a 90 degree tilting motor would not normally be the same kind of motor. Also, the bed wouldn't have to move, so the footprint of the machine could be smaller than some others too.

  • @RaffaelePignataro
    @RaffaelePignataro 3 місяці тому +2

    Which filament did you used for the prints in the video? Creality hyper pla?

  • @peterboy209
    @peterboy209 4 місяці тому +2

    👍 ease of use 👍

  • @eggbag4182
    @eggbag4182 4 місяці тому +2

    This is very interesting. Creality should make a cheap AMS to really compete with the A1

  • @kreinova2747
    @kreinova2747 4 місяці тому +5

    Nathan is the CHAD for 3D Printing. Can't wait for Nathan to actually Builds Robots because I love Robots Making. Btw, i Just watch your livestream 4 hours before now i got this video. yay

  • @howardkey6152
    @howardkey6152 4 місяці тому

    I sold my ender s1 and got out of fdm printing I will definitely be buying these whenever they run a sale at micro center

  • @xCyAx
    @xCyAx 4 місяці тому

    Thank you for this review! I have a question, does this also let you change the speed on the display during printing? The K1 has that option when clicking the speed on the display that lets you use ultrafast normal slow and silent.

  • @bio.s2903
    @bio.s2903 4 місяці тому +1

    for the 20 degree overhangs it might be that the layers were a little more than 0.2mm apart making it seem better since the droop would be more consistent then if the premineter was barely touching the previous perimeter like on the 30 degree overhang but that just my theory

  • @MikeC19100
    @MikeC19100 4 місяці тому

    Great review and overview of this printer. I used to have the Ender 3 S1 and it was my "Workhorse" printer. This one looks to be similar, but with some significant differences too. Like you, I wish it had the ability to "MOD" some things, like I would like to see a light bar option, even if it were just the screw holes to add that feature by purchasing a light bar from the 3S1 or a similar sized model. What app did you use for sound testing? That one looked feature-rich and even if there was a fee it seemed like a good app to have.

  • @KilianGosewisch
    @KilianGosewisch 2 місяці тому

    good friend of mine was getting no bed adhesion at all. turns out the paper tissues (flue season) he got as a gift from the pharmacy contained camomile oil. lol

  • @DustinGorman
    @DustinGorman 4 місяці тому

    Nathan, as the definitive source for 3D printing news. I'm gonna need to know when that bigger bambu is coming.

  • @Guapogiboy
    @Guapogiboy 2 місяці тому

    What did you apply in the build plate? Some liquid adhesive?

  • @peterd.4055
    @peterd.4055 3 місяці тому +1

    Hi! For a non-beginner, but also non-professional hobby 3D home printing, which one would you recommend, this Ender 3 V3 3D CoreXY or the AnkerMake M5C maybe or Flashforge AD5M (mainly from the point of view of: print quality, supply of parts, PETG and TPU printing, self-designed objects that require more special slicing settings and filament change multicolor printing)?

  • @squirralien1863
    @squirralien1863 4 місяці тому

    I was too impatient and brought the KE thinking it would be great anyway, well it is but mine took a bit to get to print, it was 2mm out from opposing corners, I levelled the X axis and now it is 1mm front to back out and does print very well, I would be much happier if it was more level but in my stubbornness I brought it as an out of the box good print printer so I refuse to mod it,,, for now anyway.
    I will end up with the V3 after it is available in Au, it looks much better and I believe it will be in most ways. I still have the S1 pro, I have found it to be so reliable and consistent. The K1 max has also been great, consistent & reliable

  • @marwelles
    @marwelles 4 місяці тому +1

    I love your analytical approach to reviews. the new v3 promises well, but perhaps it was the right time to move on to another

  • @Mintor94
    @Mintor94 4 місяці тому +3

    28:45 another subtle Bambu grilling, i like hearing such things

    • @netpackrat
      @netpackrat 4 місяці тому

      The Bambu is self-grilling. 😆

  • @huseyinbogazkaya9926
    @huseyinbogazkaya9926 4 місяці тому +1

    They made a really nice printer that is a total over kill finally. Only thing you mentioned is the fine tuning the heatsink hotend fan needs a thermostat and to tune the fan accordingly. Longer life spam for the fan and reduced noise. I want them to male a 2pro update ı really want a compact printer. With an over kill spec.
    £359 for xz its expensive ı would really love the see a 2prov3 all of the weight saving and cable management for £250 would be a sweet spot.
    Im looking fir bew printer and flashforge m5 for £299 is sweeter than the xz right now

  • @ImSoMagic
    @ImSoMagic 4 місяці тому +3

    Looks like a great 3d printer for small print farm!

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому +1

      Creality print software looks amazing for farm use. You can view all your printers and send out jobs straight from the slicer.

    • @ImSoMagic
      @ImSoMagic 4 місяці тому

      @@NathanBuildsRobots I would prefer to have Orcaslicer and real Klipper like my rooted KE, but for a print farm yeah the 3 V3 no suffix with Creality Print is a really good start

  • @landerhoolsteens
    @landerhoolsteens 3 місяці тому

    can you do an short to follow up on this printer like a vid where you show it off after a month and how its printing?

  • @tek9058
    @tek9058 3 місяці тому

    All we need is the Magneto X tech in future, totally hyped for it. It has no printing noises, just fans are loud

  • @reckonill
    @reckonill 2 місяці тому

    @Nathan...how would you compare this to the new V3 to the K1 if price was equal? Torn between the two.

  • @Torskel
    @Torskel 4 місяці тому

    The 20 and 30 degree overhangs are probably due to the angles getting different airflow

  • @DiThi
    @DiThi 4 місяці тому

    I'm surprised that Voron was not mentioned once. I think that for both of these printers they borrowed a lot of design decisions from Voron. Also the switchwire was kind of designed to be able to convert an existing bed slinger instead of making it from scratch. A nice side effect of it being core XZ is that Z hopping is very fast and it can prevent stringing and oozing by not taking too long to lift. During the spike test it is not hopping though.

  • @Jim_One-wl4ke
    @Jim_One-wl4ke 4 місяці тому +1

    Awesome review 👍, would you recommend the KE over this core xz? Thanks for sharing ❤

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому +1

      This one has better part cooling and a stiffer frame... This one should perform a bit better overall.

    • @Jim_One-wl4ke
      @Jim_One-wl4ke 4 місяці тому

      @@NathanBuildsRobots thanks appreciated

  • @sandymclea
    @sandymclea 2 місяці тому +1

    That top rail running on a bushing .. and with a spring. Much like a inkjet printer. I have a large format inkjet, and it's important to keep a rail, that has a bushing running on it, clean and ever so slightly lubricated. Having it exposed like tbis may attract dust, and that bushing will bit be happy.

    • @NathanBuildsRobots
      @NathanBuildsRobots  2 місяці тому

      Interesting, I think precision on inkjets is more important than in 3D printing, so adopting a similar setup is a good idea

  • @MichyVerdon
    @MichyVerdon 4 місяці тому

    Is it possible to mount the roll holder somewhere else? Im asking cuz the area i have is cramped and the roll would get in the way

  • @lolrobin
    @lolrobin Місяць тому

    Any news on a fan mod? I’ve been seeing some people noticing the idle noise levels can be quite loud aswell as when leveling etc.

  • @bethanieknapp1467
    @bethanieknapp1467 4 місяці тому

    I think in your print you need to reduce nozzle temp a little bit so the bridge is better and the stringing doesn't happen. great video overall.

  • @SerdarMutlu
    @SerdarMutlu 4 місяці тому

    how about loading and unloading filaments? is it done automatically or painful as it was before?

  • @reviewmirror
    @reviewmirror 4 місяці тому +1

    Nice 👍

  • @Duckferd
    @Duckferd 4 місяці тому +1

    A bit bummed by the proprietary castings etc reducing modability compared to regular Ender 3s, but the fact that it's a core XZ is interesting- taking a page out of the Voron Switchwire/Enderwire mod notebook? With vanilla Klipper this actually looks like a pretty good package.

  • @SPG_ADR13N
    @SPG_ADR13N 4 місяці тому

    @Nathan Builds Robots
    I was about to purchase the printer on the German store. It doesn't exist there though. I next tried EU store, it says it's already sold out.. the US still works. When will it be available on the German store - or more generally on the EU store?

  • @fael3140
    @fael3140 4 місяці тому

    I would love to see some detailed prints with the input shaping on. Maybe thats is my chance to get Into fdm terrain for my hobbies.

  • @artifixprime
    @artifixprime 4 місяці тому

    Is the hotend on this the same as the K1C? I think I saw that it was different to the original K1

  • @lorenzoschneiderman1589
    @lorenzoschneiderman1589 3 місяці тому +1

    anyone know what z hop settings are best for this machine? i imagine core XZ greatly reduces stringing

  • @marc_frank
    @marc_frank 3 місяці тому

    I bought a BTT Manta M5P which I originally wanted to put in my Mingda Magican Pro. But I'm also kinda tempted to build a completely new printer instead. Any suggestions?

  • @milespettingill
    @milespettingill 4 місяці тому +1

    Would you say this is better, worse, or equal to the cr 10 se?

  • @StephenSmith-vs8hr
    @StephenSmith-vs8hr 2 місяці тому

    What would you buy the M5C or this one. Or the anycubic Kobra 2 plus.

  • @kylestyer8240
    @kylestyer8240 3 місяці тому

    10 year Creality AMS PLEASEE!!!!

  • @ginoantenucci6424
    @ginoantenucci6424 4 місяці тому +1

    I think that Creality should make a ender 3 that has the performance of the v3 but the modality of the original ender 3

  • @BD-js5vr
    @BD-js5vr 4 місяці тому +1

    Great to see this improvement. Without the competition of bambu lab, creality would continue building slight updates of the OG ender I think

  • @norbertolszewski9505
    @norbertolszewski9505 4 місяці тому +4

    So, bambu A1 its nothing special but this is...

    • @logicalfundy
      @logicalfundy 4 місяці тому

      It has a very special cable for its heated bed!

  • @volkanislek
    @volkanislek 4 місяці тому +2

    Hi Nathan, V3 and CR10SE are very similar at the price. V3 is a sturdy, smaller and faster printer than CR10SE. Is there any advantage of CR10SE over V3?

  • @SkateSoup
    @SkateSoup 4 місяці тому +1

    Other than someone who does volume printing of files that z hop constantly or maybe a counter to crap lead screws causing artifacts, Core XZ really feels like the answer to a question nobody is asking. Maybe they got cost savings pulling things from their K1 motion system over here, they do like cost savings.

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому +3

      I thought the same thing before getting some hands on time with this machine. But visually, it's really clean, and well built.
      CoreXZ vs I3 really doesnt matter as much as overall build quality and attention to detail. Maybe it's an unnecessary marketting fluff feature, but they pulled it off correctly at least.

  • @omarmartinez9527
    @omarmartinez9527 2 місяці тому

    Hello in CURA SLICER wich is the best option in the models list to fit this printer_?

  • @trenzterra
    @trenzterra 2 місяці тому

    I just got a ender 3 v3 and noticed the gantry isn't level. Do you know how to level the X gantry on this model? I'm lost with all the belts

  • @schmeglyomigy6174
    @schmeglyomigy6174 Місяць тому

    Would you say the Sovol SV07 or Ender 3 V3 SE is better?

  • @ragesmirk
    @ragesmirk 4 місяці тому +1

    The load cell sensor is gone?

  • @AFAR2809
    @AFAR2809 4 місяці тому

    nice entry! 😂

  • @SaultiBalldeip
    @SaultiBalldeip 2 місяці тому

    Think this is the best bang for the $ first 3d Printer or a Bambu?

  • @pecawiener
    @pecawiener 2 місяці тому

    What are the experiences after two months of use with the first layer at normal (CrealityPrint) recommended speeds? Simple question - simple answer if possible. Thank you.

  • @AndyRC
    @AndyRC 4 місяці тому +2

    Are you sure you can't adjust the flow Nathan? It doesn't have the expert mode that Creality just pushed out on the K1 series. My k1 got an update a few weeks ago that now permits us to adjust the speed, flow, z height, and nozzle PID calibration. Mine is rooted so it had it before but it was nice that Creality added it to the stock software.

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому

      That's great, I am using the stock firmware that it shipped with, I think it should be getting the new firmware soon

  • @KyleSSamuelson
    @KyleSSamuelson 4 місяці тому +1

    9:56 I love that you point this out, such a fascinating design decision.

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому

      The P1P tool carriage I have inspected does it too. There is definitely more to the way these things are built than most people realize.
      Note that it is spring loaded and forced into the UP position. So if it bumps into anything on the build plate, the preloaded already has the bushing making contact to resist the load.

  • @Pugwash.
    @Pugwash. 4 місяці тому +12

    Also worth noting they have put the spool holder in the correct place this time.

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому +2

      Under the printer?

    • @Liberty4Ever
      @Liberty4Ever 4 місяці тому +2

      The *CORRECT* location for the spool holder is mounted to the wall above the printer... and NO reverse Bowden tube. 😛

    • @GucciBodyBags
      @GucciBodyBags 4 місяці тому +2

      Agree. If a spool holder is gonna be attached to the machine, keep it off the gantry.

    • @kshepherd2005
      @kshepherd2005 3 місяці тому

      It would be nice if the spool holder rotated for valuable farm space

    • @Pugwash.
      @Pugwash. 3 місяці тому

      On my ender 3 I made my own holders. The one that hung out to the left was actually more popular than the one that faces backwards, but both from the base.@@kshepherd2005

  • @Deepfriedprobs
    @Deepfriedprobs 2 місяці тому +1

    As a noob, I’m enjoying the Ender 3 v3. What it lacks in mods it makes up in ease of use. The side loading is a bit of a pain. I’ve had one spool get tangled, so I’d like to upgrade to a better spool holder or loading system. With it being new still, I’ve had to order the “unicorn” nozzle directly from Creality. Microcenter didn’t stock them. Still waiting on what the two empty screw holes at the top, are for.

    • @NathanBuildsRobots
      @NathanBuildsRobots  2 місяці тому +1

      I think they have a printable model to move the spool holder to the top

    • @Deepfriedprobs
      @Deepfriedprobs 2 місяці тому

      @@NathanBuildsRobots So the runoff sensor would need to be moved too then. Not a big deal, but it’s definitely a change. Thanks for the reply!

  • @JoshuaLotion
    @JoshuaLotion 4 місяці тому +1

    I’ve never seen someone with so many printers talk like they know nothing about printers.

  • @spencerbair1137
    @spencerbair1137 22 дні тому

    14:18 the plague of USB-A. It NEVER goes in right the first time!

  • @Angelo-24.
    @Angelo-24. 4 місяці тому

    ordered mine gets here after tommorow because i was one of the first hundo to order!!

  • @pargoff
    @pargoff 3 місяці тому

    If you had to choose between the Ender 3 V3 and K1 at the same price, which would you choose?

  • @MrUniq
    @MrUniq 4 місяці тому +5

    I'll wait for a version 2 of this very printer but I think this and the the K1(to a lesser degree) are steps towards Creality redeeming themselves. I know everyone and their mom has Enders...but I can't tell u how many times I hear those same people compalin about those old printers when I'm strolling through a Microcenter. I actively blocked a salesman from showing a mom a Neo(she was complaining about bed adhesion on a v2 she had) when there was the new KE and SE's right behind them.

    • @MrUniq
      @MrUniq 4 дні тому

      I bit the bullet and got this machine on sale at MicroCenter. Under 300 is a good deal for the features u get. I paid more than that to upgrade an old printer. I don’t need the plus model. I use this just like any other Klipper machine I use. However, Creality’s own UI is unimpressive.

  • @Ripshot
    @Ripshot 4 місяці тому +3

    What is the storage capacity for files on that machine..? To compare my K1 Max has 8.0GB.

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому

      I think it should be the same onbaord storage. If you need more capacity you can plug in a USB drive

  • @Torskel
    @Torskel 4 місяці тому

    replace the bushings with Hilube ones

  • @MJ__90
    @MJ__90 4 місяці тому

    How does it handle TPU?

  • @davidsolomon9087
    @davidsolomon9087 4 місяці тому +5

    why? why are they sticking to the 220x220 bedsize?
    breakout and up the standard, 275x275 would be a good intermediate size and make it worth upgrading to a new machine for some of us.

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому +3

      Looks like you're wanting to see the Plus model..... Just stay tuned ;)
      I think creality should step up to 230x230. Their standard plate is already 235x235, they are only using the center 220x220 portion. But when you get that far out onto the edges you end up with pretty uneven heating.

    • @archivedcafeteria
      @archivedcafeteria 3 місяці тому

      Any idea if there will be one, this looks like a brilliant printer, just wish it was ~300mm^3
      Any recommendations?
      So many printers nowadays it's hard to choose

  • @happninmojo
    @happninmojo 3 місяці тому

    has a A1 actually caught fire yet? I know the cords could lead to fire but your wording made it sound like that actually happened with Bambu. Which I can't remember happening since the Anet A8 days.

  • @lucianodaloisio
    @lucianodaloisio 4 місяці тому

    Maybe you could free your other hand from the camera when showing some close up details? For example, when you manipulate the torture toaster, you could show us better the mechanism woth both hands.
    Anyway, a great video!

  • @deucedeuce1572
    @deucedeuce1572 2 місяці тому

    That's a Die Cast Aluminum base? Looks like stamped sheet metal to me. I think Die Cast would be thicker and heavier, but I think aluminum can be die casted pretty thin. Not sur of how thin though.

  • @magdalenagardelin8925
    @magdalenagardelin8925 4 місяці тому +2

    Can you do fan mods on v3 se 😊❤

  • @Guy_Sandler
    @Guy_Sandler 3 місяці тому

    can we get a v3 vs ke (vs a1 maybe)?

  • @3dpathfinder
    @3dpathfinder 4 місяці тому +1

    Trying to get them to let me review. Put in a good word for me. I cant keep buying lol

  • @user-ky3yc5ef3w
    @user-ky3yc5ef3w 4 місяці тому

    you should compare this with the bambulab a1, they're the same price

  • @berlinberlin4246
    @berlinberlin4246 4 місяці тому +1

    I miss the link and name of the print surface Glue!
    Please add the link.

  • @infectioushost1
    @infectioushost1 3 місяці тому

    This makes me feel like I have to get an inferior A1 for multicolor A1 is good but this printer seems robust only time will tell I may be wrong . Multicolor option for this machine will annihilate bamboo

  • @ToviDing
    @ToviDing 4 місяці тому +1

    it looks like creality is becoming more close sourced like bambulab. upgrading their machines are becoming harder then ever

  • @Danni4096
    @Danni4096 4 місяці тому +1

    As I bought Ender 3 V3 KE they released this.

    • @Dr3dMNR
      @Dr3dMNR 4 місяці тому +3

      and by the time we buy it, they'll release the Plus version 😆😅😅

    • @NathanBuildsRobots
      @NathanBuildsRobots  4 місяці тому +3

      I know you're joking but....

  • @user-ss8tp5xt1p
    @user-ss8tp5xt1p 3 місяці тому +1

    How do you like that bed adhesive?