LOW COST AND LOW HORSEPOWER SHREDDER FOR SMALL BUDGETS

THIS SMALL 10 HP SHREDDER CAN SHRED TIRES AND HARD DRIVES AND IS A LOW COST AND LOW HP ALTERNATIVE TO SOLVING YOUR SHREDDING PROBLEMS TO PROCESS WASTE MATERIALS IN A SHREDDER FROM EIDAL SHREDDERS

[@josevega6254]

Very cool

[@ShredderhotlineDanBurda]

Some units are 5k and some are 10k

[@ShredderhotlineDanBurda]

SEND INQUIRIES TO [e-mail] AND WE CAN SEND YOU DATA AND PRICES ON ALL OF OUR EIDAL SHREDDERS THAT WE MAKE

[@gregorycooper3523]

I would like to see it powered up and shredding.

[@Negativecreep0]

can this handle aluminum block heads? and brasses?

[@ShredderhotlineDanBurda]

THE MACHINES ARE SOLD ON THE CENTER TO CENTER DESIGN DISTANCE OF THE TWO SHAFTS AND THE LENGTH OF THE OPENING AND THE CUTTER WITH AND THE HP AND RPM OF THE GEARBOX DRIVE AND THE HEX OR SPLINE SHAFT USED...20K IS A GOOD STARTING PRICE FOR THIS MACHINE DESIGN OR GO TO SHREDPAX.COM SITE AND SEE OUR SPECIFICATIONS

[@arunsahu4880]

Please price this machines

[@jleonard1831]

Low cost? Since when is starting at$25k low cost?

[@ShredderhotlineDanBurda]

I WILL GIVE YOU THE DRAWINGS AND LETS SEE IF YOU CAN BUILD IT FOR UNDER 25K..I WILL BET MY BRITCHES THAT YOU CANNOT COME CLOSE...

[@jleonard1831]

You're correct I could not, but that wasn't the point I was making. I was saying that $25k is not low cost.

[@ShredderhotlineDanBurda]

you can go to any youtube video of the shredpax.com brand that we own...az20 or az40 are this machines in this size range that can be seen [e-mail] for direct data

[@morpheusjones8424]

So the video says 30k-70k for one. Your comments say 5k-10k. Which is it?

[@ShredderhotlineDanBurda]

All depends on the design.

[@ShredderhotlineDanBurda]

PRICING OF SHREDDERS ALWAYS VARY WITH MANY FACTORS..
SO ITS NOT AS EASY AS IT SEEMS WHEN PRICING A SHREDDER
GO TO SHREDPAX.COM FOR A LIST OF THE BASIC MACHINES AND THEIR PRICES
AND EVEN THAT DATA VARIES IN PRICE WITH SPECIFICATIONS OF THE SHREDDER THAT ARE SPECIFIC TO EACH SHREDDING TASK

[@hirasharma7509]

9675735511

[@chvnraochvnrao2915]

Price detils

[@ShredderhotlineDanBurda]

@@chvnraochvnrao2915 [e-mail]

[@ShredderhotlineDanBurda]

SEND EMAIL TO OUR GROUP [e-mail] FOR ENGINEERING COMMMENTS AS YOU MAY NEED A MACHINES SLIGHTLY LARGER
A STANDARD EIDAL 5444 WOULD BE SUITED FOR THIS APPLICATION BUT SMALLER MACHINES CAN OFTEN DO THE JOB IF PROPERLY SETUP

[@MrNastytrucker44]

Interesting. I have recently purchased a commercial property that was used as a truck tire dump site. I counted 2300 used tires. If i spend 25 to 30 thousand dollars on this would it last the entirety of my clean up + stand the test of time?

[@danburda]

815 674 5802

[@ShredderhotlineDanBurda]

LOOK AT THE EIDAL VERTICAL UNIT AND SEND YOUR REQUEST TO SHREDDERHOTLINE.COM AS WE HAVE BEEN DOING DEMIL FOR THE LAST 50 YEARS AND SUPPLIED SHREDDERS TO THE US ARMY AND US AIRFORCE FOR IRAQ AND AFGHANISTAN TO SHRED MATERIALS...

[@manojpadhi6552]

Can we shreed bike tyres

[@ShredderhotlineDanBurda]

yes you can shred many things

[@edgaraispuro8367]

looking for a machine that would demilitarize mutilate copper wire, 20mm to 40mm brass and aluminum shell cases "soft metals" with small steel attachments to the point of not being reused for the intended purpose loads of up to 40,000 pounds time constrains inside the base they don't want me there for a week doing this process it needs to be small enough to be mobile and self load the product trough conveyors.

[@ShredderhotlineDanBurda]

Use our vertical shredder or this shear shredder with proper blades and screens if needed. [e-mail]

[@ShredderhotlineDanBurda]

SEND YOUR LEASING DATA TO OUR MAIN EMAIL
[e-mail]

[@JuanGonzalez-es6hc]

I have a small tires business

[@ShredderhotlineDanBurda]

[e-mail]

[@ShredderhotlineDanBurda]

SHREDDERS FOR A LOW PRICE
SHREDDERS ARE NOT HIGH PRICED
$25,000.00 GETS YOU THIS MACHINE....
SOME START AT $10,000.00 AND MANY AT $15,000.00 AND $20,000.00

[@jeffbobold]

Payments on a shredder like that would be around $500 for the right credit. :)

[@Kpochaiah-sg4zx]

8309971296.Plz help full dtls

[@TippyTat924]

How much?

[@ShredderhotlineDanBurda]

$45,000.00 FOR A HEAVY DUTY DESIGN PLUS FREIGHT OF 5K..THEY ARE NOT LIKE THE 1993 VERSION THEY NOW WEIGHT 7 TONS DESIGNED LIKE A BATTLESHIP BECAUSE ALL USERS PUSH SHREDDERS HARD AND WE HAVE TO DESIGN FOR THAT ABUSE

[@ShredderhotlineDanBurda]

CONTACT US AT SHREDDERHOTLINE.COM OR SHREDDERMAN.COM FOR MORE DATA

[@carlomadridcanales]

what is the price?

[@ScottSmith1993]

Know more details in whatsapp:[phone]

[@hiteshchoudhary3011]

What is the price