yeah great case for those who doesn't wanna see their pc parts, it's like hyte revolt or velka or nzxt h1 etc. Still gonna stick with meshlicious, great view and compatibility.
For me the dust filtration while sustaining airflow is the key task of the case. Without the dust filtration I can equally put the hardware into a fully open frame or whatever box and have the same result. Or Mount the Hardware to the wall full open.
I've been running a meshlicious for around a year without cleaning with negative airflow and there's almost zero dust. Mesh is so dense it doesn't need filters.
@@MrDutch1e I've been running an open pc mounted on a frame for around half a year, I tried cleaning it with compressed air multiple times but nothing comes out every time I try. I don't clean it anymore. The dust issue depends a lot on the environment. My room is clean enough for open pc.
@@MrDutch1e dust is literally smaller than 500nm Wich is like 0.0005mm big there’s no way they could make such small holes maybe you just don’t have much dust at home
I love the main idea of this case, but the execution seems like a conjunction of many afterthoughts. 1. Why no cable ties when the case is huge inside? 2. Why make the psu cable routed outside if there’s a load of space inside? 3. Why make a mesh top but the wall underneath not perforated? 4. Why make the back look like a bottom, have punched holes where feet could go, but not allow a horizontal mount? (Just a guess) 5. Why charge such a high price, but then have the outside be completely plastic in comparison to every other “D Airflow” series case ?
1. Company preference (money) 2. It'd be more excess internal cable management. The point is that there is a LOT of space not taken up by wires going everywhere. 3. Aesthetics. 4. Soley designed to be vertical. 5. It's Corsair, isn't that expensive compared to other ITX cases, and it has a plastic shroud because getting some of those inset lines on the case shroud are near impossible to be mass-manufactured with metal, however the plastic is not low quality or thin whatsoever.
Case doesn't require a riser based on the motherboard mounting. The price of the case should have been around the 109.99 price point. The case depth should have been increased by 25-50 mm to allow for fans and a 3 slot gpu as well as provide a chamber to route the PSU cable inside. The top magnetic cover could have covered and allowed access and the top of the case could have had a gromet to bring the cable inside. This should have shipped with all of the QX line as I will say building with the new proprietary cable made wire management a breeze even if most of the RGB view is limited.
@@zyzzyx914 you're talking about niche companies that don't have Corsair's reputation and probably won't sell as many units. Getting their tooling costs back is going to be harder than for a company the size of Corsair.
@@TheRealExbit I also would have preferred that the motherboard I/O would come out of the top instead of the bottom for easier access, like most other rotated layout cases.
Whew, beautiful case; even better cinematography on the vlog style sections. You guys are amazing. This reminds me of my NR200 set to "vertical mode", where all the outputs are up top.
I totally agree. The fact that they dont even give the exact gpu width dimensions on their website or even in the manual, tells me that they're trying to not bring attention to that part.
Oof. The case size is intriguing because it can (should) fit more components, but I'll wait for the updated version if Corsair decides to stick with SFX.
I did a build with this system using a PA 120 SE w/ noctua fans tuned to max 1250rpm and Asus Tuf 3090. I have 3 arctic p12s at 800rpm at the front. Its decently silent tuned this way. AMA. He is right though about the GPU airflow being odd. I pulled the filter and it did cool off a lot. In my case i'm using an asus Tuf 3090 in silent mode setting and it is much quieter with the filter at the back pulled off. My temps running simple heaven benchmark is around 70c with gpu fans coasting around 1250rpm. Otherwise, it would eventually ramp up to 2k rpm at a higher temp. An odd thing about this case is that the way the gpu heat comes off of the gpu, it likes to come out in all directions. I can feel cool intake via the back and heat pops out the sides and top. The top interior though is a solid piece of metal so the heat spreads out through the top of the case. Even though there is a mesh top panel it doesn't really help the heat escape. They need to redesign it with holes and maybe a mount so that you could put some giant fan up top to help exhaust out the top as an option. Especially it seems length isn't a super big deal vs thickness for gpus. I eventually will put in a 4090FE so i'm guessing i can reverse the top 1 or 2 front fans and hope it blows out the hot air out front and let the bottom fan push in something to the cpu area. PROS: looks/style, front panel, footprint, no riser needed vs something like meshilicious, h1, hyte CONS: feels cheap weird design choices at the top of the case
2:08 "Boring" is good. Totally disagree about adding different textures and extra crap to the design. There are plenty of those types in the market already . I want simple and plain.
They should have used a thicker panel for the GPU side. If they had gone with, say, 1.5mm steel, they could have used a significantly more open configuration of the holes without compromising structural integrity. Not a terrible case, but I definitely think that they made some poor choices about where they cut costs.
I dont understand this GPU temps. I have the dustfilter on (have removed the once in front and on the AIO side) and have a stable GPU temp of around 70 celsius. My GPU is a Asus RTX 4070 dual card. intake fans in front are set to 30% becouse of noise and I have a coolermaster ML360 illusion that is set to exhaust. I am over all very satisfied with the case. But there are some things I think they should have made better. I wish they had made it easier to place non slim fans in front the case since its so big allready, a few more millimeters would not had anything to say (Im not really a fan of corsairs fan system and think they are very noisy compared to other fans and I also don't like the software) . I have a motherboard with a m.2 ssd on the back with a heatsink, this won't fit atleast it does not for my Asus ROG X570i so i had to modify the case and cut away a bit. I also wish, like it was said in the video that they would include a extra ssd bracket since it is space for it. The ssupd meshlicious also have the IO pointing down but atleast on the corsair its space for the cables that goes from the GPU. Overall I am more happy with this case then the meshlicious and my overall temps are atleast better on this one. CPU is a AM4 Ryzen 5 5600X.
It's really sad that case manufacturers are giving us genuine, interesting innovations just as the graphics card manufacturers and motherboard manufacturers are doing their level best to destroy the entire hobby of PC building.
The PC hobby just can't catch a break man. First it was bitcoin mining ruining the prices, then RAM was impossible to get at a decent price, silicone shortage, and now nvidia is deciding to self destruct. It's so close to being the golden age of PC building but we can't get there
@@qwuzzy AMD is complicit in this too. They benefit from changing the norm of GPU prices just as much as Nvidia. Sure, they sell cheaper GPUs than Nvidia but they certainly aren't trying to return the prices of GPUs to the older days. Intel aren't saints but we really need them to exert some pressure in the GPU space.
at least ram prices and storage prices are rock bottom right now to offset the cost. also unless you you have the absolute top trim graphics cards their no reason to buy more than an i5 or a 6 core ryzen at the moment.
Just watched the whole thing, classic itx case from a big manufacturer, bad space optimization and too restrictive airflow :| great review as usual, thanks :)
Pros: - Looks nice (from the outside) - Size is perfect, not too big not too small - All panels are removeable for easy access Cons: - Literally everything else. I bought this case (RGB Airflow with fans) and I was shocked, they managed to make all the bad design choices, even the fan cables routing could be much cleaner if the cables were on the other side. I spent ~5 hours assembling my PC inside this case, I can write a book on what they should have done differently. Note that the shell is held by rivets instead of bolts, so if you thought you could flip it or something, you will not be able to do it easily. iCue requires 9pin USB header, check if your motherboard has one, I have Minisforum BD790i so now I have to figure out how to connect it. I would recommend to wait for the second version/revision (if they will make any), or if you really like how it looks and want to buy it then make sure you know what you get... Most tech youtubers can't be trusted because they get paid to advertise stuff and also probably don't take the time to use the item themselves before reading the info points that the sponsor provided them.
You'd think they'd have at least 1 itx enthusiast working at corsair. 25L is massive for itx only board. Just go meshroom or meshlicious. There's so many superior options.
Unless I’m mistaken Origin sells a prebuilt using this case and JayzTwoCents did a review on it about 7-8 months ago and in that video with a 4080 founders and 13900k his temps were 80 and 75 C on cpu/gpu which for those components are pretty good in a sff build. Not sure why your temps were so off with lower spec components. I’d still consider this as a pontential case for a build if I were going sff
External looks, cheap plastic (6/10) Internal design (5/10) Price (5/10) If you want vertical, just buy Meshroom, or just grab the NR200P, so so many case better than this.
Always love your detailed ITX case reviews. I definitely like this style of tall standing ITX cases, but this one is a no go for me - It does look cheap for the price! I like the push-open hinged top panel of the Phanteks Evolv Shift cases with easy access to the I/O Ports - I rather have the MB on top. I just hope Phanteks or other brands release something better, while improving on the GPU cooling and support.
I just built a system with this case, and the new icue link system. With some patience, you can route and fit 25 mm fans on the front, but it depends on the ITX Motherboards I/O plate for some clearance. MSI z790i EDGE WiFi GTX 4090 FE SF1000L iCUE LINK H150i RGB AIO Liquid CPU Cooler with 3 additional fans. I would highly suggest building or purchasing a custom length ATX 24 pin. Depending on the PSU 100 mm SFXL or 150 mm for SFX to allow easier wire management. So far temps have been decent, and the pc is quiet under medium load.
I feel as though Corsair wanted to use a different layout with a riser cable like nzxt which is very reminiscent of but didn’t want to pinch the cable like nzxt & cause a fire hazard, just speculation but possibility who knows
The ONLY systems I've ever owned with components that failed (at any point - in or out of warranty) were Corsair Ones. The 1080 in my first gen failed after only a few years. More recently, an a200 experienced pump failure and the warranty replacement took over six weeks to process... oh, and was shipped with Win11 instead of the Win10 that I originally ordered and still prefer. This case initially looks interesting, but the PSU cable "management" on the back and the video I/O are far from optimal. Meanwhile, the lack of a top exhaust fan - you know, 'cuz heat tends to RISE - is just perplexing on a case this size (and at this price). IMHO, Corsair might want to take a look at what they're doing in this space (pre-builts, cases) and make some adjustments to improve quality and function.
Look at the nr200P mesh (case and filters) compared to this case and you will see the difference. All mesh is not created equal. GN has pointed this out many times.
I feel like the original version of this case was a little better ....it had fan at the top and all the i/o was at the top as well. The velcro straps were for all the cables.
I had really high hopes for this, but the fact, that it doesn't support 4 slot gpus is unbelievable, considering its size. Like how does this have the same gpu support as a meshlicious?
Meshlicious uses riser, so it optimizes space better. This case is NR200 placed vertically. This layout's biggest plus is compatibility with good air towers and no risers
I like the size, but not the price. The O11 air mini supports ATX boards and PSUs, and comes in at a lower price. The 5000d airflow is cheaper and supports bigger gpus. I was interested in moving to this case... Was
Producers need to fix one big flaw of vertical cases - media panel needs to be mountable both on top, or on bottom, else you are stuck on table or on the floor. Give me options dammit!
Nothing will ever top how insanely awesome the Corsair One was. And while this case is massive for an ITX, it is still very cool of a set up and smaller than an ATX case.
Did you test temps with the front set to exhaust and the side rad as intake? In the video the front looks set to intake, which probably isn't helping GPU temps.
Only fits up to 3-slot GPU, I'm using a 3.7-slot RTX 4080, sadly this case is not for me... Using SSUPD Meshroom S but I prefer the non-riser case like this
Looks like Corsair put their c team to work on this case. Magnets on side panels and open frame design on the GPU side seems like a no brainer, and other manufacturers have been doing it for quite some time now.
I'm using a Silverstone Alta G1M and this looks similar to that and I really like this kind of form factor that takes up less space on the desk but looking at the io location and quality, i think i'd rather stay with the Alta case for now. Hope more case companies makes these kinds of casings though.
Nope. I got this case a week before the release date from a local retailer and it went back the next day. The case poorly space optimized (seriously though, the meshroom can fir a 353mm 4 slot GPU and a 280mm rad), has barely any cable management and has the jankiest PSU cable out I have ever seen on a case. The only things going for it are the 360 rad support and the rgb fans.
Just makes me wish Corsair did a larger version capable of fitting Micro Atx boards. Which would be similar to Silverstone Alta G1M. I don't like being forced into both mini itx boards plus also SFX power supplies. That's just a double whammy for system builders. I do like the vertical aspect. And I feel a lot of people out have desk space to spare in height but not so much in depth. Personally I dont mind not having heaps of GPU options. But this is better than Silverstone's in that regard. I don't see Corsair or Silverstone stealing many people away from the AP201. Which is incredibly versatile. I know it started with NR200 and there are the Jonsbo ones etc too. I'll watch on to see where this small and tall design goes..
I'm really liking the mesh panel designs. Tired of the fish tank unicorn vomit pc cases and my next machine will likely have no rgb or very limited rgb and either a solid panel or a mesh one like this or that asus prime ap201. I wish thermaltake would release a mesh version of their tower series that would be super cool.
I see a number of new cases have USB-C port but do not specify if this port can support USB 3.2 gen 2x2 or USB4. Are all USB-C ports created equal with full support for whatever?
@HardwareCanucks Will it fit a 4090 (Specifically MSI VENTUS 3X) or is that being to optimistic with the available GPU space? I assume to remove the dust filter so it can breathe a little more 😅
just wondering if it is possible to install 2 fans from the outside on the case, on side of the GPU to improve the temperatures, might not be suitable for everyone but if it does help significantly with temperature it might be viable.
@@elchartps3 What accessing the HDMI, DP, keyboard and mouse needs? It is connected and you leave it like that. Front ports are for sticks and other crap. People are crazed about aesthetics with their RGB sluthouse looks and somehow ignore how ugly the cables coming out from the back are.
This seems like more of an MATX case rather than an ITX. They need to make a 1000 D case where you can fit up to a 280 mil. In it, but figure out a different place to set up the ITX motherboards only. That's easier to access than on the bottom
Isn't it possible, as you can install the side panels up side down, that the idea is so that the case can be flipped up side down? By moving the legs to the top and installing the side panels up side down?? Would make sense for me to have the IOs on the top, and hanging the GPU is a good thing I would say
OMFG The way you are moving the camera that way gave me motion sickness, which has never happen before! Good on you for making this happen to me. I had to stop watching the video and come back to on my 3rd attempt to finish this video.
I'm reviewing the new Cobra line from Razer, so deff had to take out the Viper Mini SE and the SE is incredible. If you can find it, it's pretty OP. -D.
I watched over a dozen reviews of this case, this review is the only one that reports high GPU temps. I'm curious why. They all had the aio in exhaust with the three front fans as intake.
I still prefer the cooler master NR200p. The old one without the vertical gpu. Can fit most really high-end parts. Good performance and amd great price
I'm struggling to understand who they're targeting with this because it's so expensive, but lacks a lot of the things that the SFF community would be willing to pay that premium for. After a certain size, cases have to contend with the NR200, which is much cheaper than this, and less of a headache because the I/O isn't pointed downward.
Those other SFF cases is too big so it's something you can't put in your living room but this 2000D is more feasible because of its small physical foot print. I like gaming on my 75inch Samsung Q-LED in the living room.
I like that it's boring look. Im 30 years old, I don't want RGB everywhere and the "gamery" nonsense. The pure black sleek look is awesome. If I want RGB, I can put some on later.
I don't like that power cable on the back. Corsair need to reroute it inside and have the psu cable come out the bottom. They need redesigning that case.
Looks like Corsair is using the same mesh as the top filter on the 4000D, which is extremely restrictive. That's pretty bad decision choice in my opinion.
I can't imagine why anyone would pick this over the Meshlicious?? I can fit my MSI Suprim X 4090 in the Meshlicious with a 280mm Radiator. The performance diff between 360mm and 280mm is almost negligible.
No hate to corsair but I have the DLH21 case by darkflash in my living room as an x-box "look alike" for couch gaming. It rivals this case for less money (granted it is smaller) and looks better IMO if you can find it available in the color you want.
The worst parts about this case have to be the fact that the cables that have to be plugged into the back of the motherboard & GPU have to be bent out of the bottom. The way this case could've been way better are... 1) Make the case a little bit taller so full sized ATX PSUs fit 2) Give more space for the GPU to breathe 3) Make the whole case horizontal instead of vertical 4) Anybody have anything else to add???
all those fancy cases look cool on youtube movie, but it sucks standing on your workplace, you'll just put it on the flor/behind desk anyway. So.... what's the point?
The RGB version of this retails for £150 in the UK. I've not been impressed with the reviews on this case either. IMO its too big, and a bit underwhelming. I had been interested in the Fractal Terra for its small size and beautiful aesthetic, but its out of stock everywhere at the moment. I opted for the SSUPD Meshroom S at 15L for its full range of cooling and hardware support. This could have been a NR200 competitor, but Corsair have missed the boat by a mile by making some avoidable and simple mistakes. What a shame.
i feel like the sizing of this is kind of awkward, its too big so more modest hardware would be swimming in it with all that extra room yet its too small to accommodate the really beefy stuff
I hope that AIB 5090 models will be less THICC than the 4090s that they offer. It's really killing case compatibility. But then again, the 5090 will probably end up being more power hungry than the 4090. Dang it...
What a great looking air purifier
yeah great case for those who doesn't wanna see their pc parts, it's like hyte revolt or velka or nzxt h1 etc. Still gonna stick with meshlicious, great view and compatibility.
Great idea, you could just add a couple HEPA filters on the exhaust mesh and it will function as an air purifier
@@nguyen_van_a Sounds like a cooling nightmare tbh
@@XavIsOnline I'd rather outlive the PC than it does me
air purifiern't
For me the dust filtration while sustaining airflow is the key task of the case. Without the dust filtration I can equally put the hardware into a fully open frame or whatever box and have the same result. Or Mount the Hardware to the wall full open.
I've been running a meshlicious for around a year without cleaning with negative airflow and there's almost zero dust. Mesh is so dense it doesn't need filters.
@@MrDutch1e I've been running an open pc mounted on a frame for around half a year, I tried cleaning it with compressed air multiple times but nothing comes out every time I try. I don't clean it anymore. The dust issue depends a lot on the environment. My room is clean enough for open pc.
@@MrDutch1e Also, my friend's running meshlicious as well and he did get a lot of dust into his pc.
@@MrDutch1e dust is literally smaller than 500nm Wich is like 0.0005mm big there’s no way they could make such small holes maybe you just don’t have much dust at home
That defeats the purpose of the case. It's meant to look good and expects you to actually do maintenance on your PC.
I love the main idea of this case, but the execution seems like a conjunction of many afterthoughts.
1. Why no cable ties when the case is huge inside?
2. Why make the psu cable routed outside if there’s a load of space inside?
3. Why make a mesh top but the wall underneath not perforated?
4. Why make the back look like a bottom, have punched holes where feet could go, but not allow a horizontal mount? (Just a guess)
5. Why charge such a high price, but then have the outside be completely plastic in comparison to every other “D Airflow” series case ?
1. Company preference (money)
2. It'd be more excess internal cable management. The point is that there is a LOT of space not taken up by wires going everywhere.
3. Aesthetics.
4. Soley designed to be vertical.
5. It's Corsair, isn't that expensive compared to other ITX cases, and it has a plastic shroud because getting some of those inset lines on the case shroud are near impossible to be mass-manufactured with metal, however the plastic is not low quality or thin whatsoever.
How do they even justify 140 for this without fans and without having to include a riser?
Mini itx cases are generally really expensive. Im going to get a Formd t1 which is $220 and comes with no fans.
Case doesn't require a riser based on the motherboard mounting.
The price of the case should have been around the 109.99 price point.
The case depth should have been increased by 25-50 mm to allow for fans and a 3 slot gpu as well as provide a chamber to route the PSU cable inside. The top magnetic cover could have covered and allowed access and the top of the case could have had a gromet to bring the cable inside.
This should have shipped with all of the QX line as I will say building with the new proprietary cable made wire management a breeze even if most of the RGB view is limited.
@@zyzzyx914 you're talking about niche companies that don't have Corsair's reputation and probably won't sell as many units. Getting their tooling costs back is going to be harder than for a company the size of Corsair.
@@TheRealExbit I also would have preferred that the motherboard I/O would come out of the top instead of the bottom for easier access, like most other rotated layout cases.
Looks like there is no justification. I got mine for 77€ :D
Whew, beautiful case; even better cinematography on the vlog style sections. You guys are amazing. This reminds me of my NR200 set to "vertical mode", where all the outputs are up top.
That GPU spacing seems like a massive oversight!
I totally agree. The fact that they dont even give the exact gpu width dimensions on their website or even in the manual, tells me that they're trying to not bring attention to that part.
It fits a 4080
Oof. The case size is intriguing because it can (should) fit more components, but I'll wait for the updated version if Corsair decides to stick with SFX.
What revisions would you hope they do?
I did a build with this system using a PA 120 SE w/ noctua fans tuned to max 1250rpm and Asus Tuf 3090. I have 3 arctic p12s at 800rpm at the front. Its decently silent tuned this way. AMA.
He is right though about the GPU airflow being odd. I pulled the filter and it did cool off a lot.
In my case i'm using an asus Tuf 3090 in silent mode setting and it is much quieter with the filter at the back pulled off. My temps running simple heaven benchmark is around 70c with gpu fans coasting around 1250rpm. Otherwise, it would eventually ramp up to 2k rpm at a higher temp.
An odd thing about this case is that the way the gpu heat comes off of the gpu, it likes to come out in all directions. I can feel cool intake via the back and heat pops out the sides and top.
The top interior though is a solid piece of metal so the heat spreads out through the top of the case. Even though there is a mesh top panel it doesn't really help the heat escape. They need to redesign it with holes and maybe a mount so that you could put some giant fan up top to help exhaust out the top as an option. Especially it seems length isn't a super big deal vs thickness for gpus.
I eventually will put in a 4090FE so i'm guessing i can reverse the top 1 or 2 front fans and hope it blows out the hot air out front and let the bottom fan push in something to the cpu area.
PROS:
looks/style, front panel, footprint, no riser needed vs something like meshilicious, h1, hyte
CONS:
feels cheap
weird design choices at the top of the case
I like the idea of reversing one or two front fans (when using AIO), thanks for the write up, I am currently thinking about getting this one.
2:08 "Boring" is good. Totally disagree about adding different textures and extra crap to the design. There are plenty of those types in the market already . I want simple and plain.
They should have used a thicker panel for the GPU side. If they had gone with, say, 1.5mm steel, they could have used a significantly more open configuration of the holes without compromising structural integrity. Not a terrible case, but I definitely think that they made some poor choices about where they cut costs.
I dont understand this GPU temps. I have the dustfilter on (have removed the once in front and on the AIO side) and have a stable GPU temp of around 70 celsius. My GPU is a Asus RTX 4070 dual card. intake fans in front are set to 30% becouse of noise and I have a coolermaster ML360 illusion that is set to exhaust. I am over all very satisfied with the case. But there are some things I think they should have made better. I wish they had made it easier to place non slim fans in front the case since its so big allready, a few more millimeters would not had anything to say (Im not really a fan of corsairs fan system and think they are very noisy compared to other fans and I also don't like the software) . I have a motherboard with a m.2 ssd on the back with a heatsink, this won't fit atleast it does not for my Asus ROG X570i so i had to modify the case and cut away a bit. I also wish, like it was said in the video that they would include a extra ssd bracket since it is space for it. The ssupd meshlicious also have the IO pointing down but atleast on the corsair its space for the cables that goes from the GPU. Overall I am more happy with this case then the meshlicious and my overall temps are atleast better on this one. CPU is a AM4 Ryzen 5 5600X.
It's really sad that case manufacturers are giving us genuine, interesting innovations just as the graphics card manufacturers and motherboard manufacturers are doing their level best to destroy the entire hobby of PC building.
The PC hobby just can't catch a break man. First it was bitcoin mining ruining the prices, then RAM was impossible to get at a decent price, silicone shortage, and now nvidia is deciding to self destruct. It's so close to being the golden age of PC building but we can't get there
Damm with the oversized GPUs! 👎🏻
Worst thing is those 4080 and 4090 dont even need to be half the current size
@@qwuzzy AMD is complicit in this too. They benefit from changing the norm of GPU prices just as much as Nvidia. Sure, they sell cheaper GPUs than Nvidia but they certainly aren't trying to return the prices of GPUs to the older days. Intel aren't saints but we really need them to exert some pressure in the GPU space.
at least ram prices and storage prices are rock bottom right now to offset the cost. also unless you you have the absolute top trim graphics cards their no reason to buy more than an i5 or a 6 core ryzen at the moment.
Just watched the whole thing, classic itx case from a big manufacturer, bad space optimization and too restrictive airflow :| great review as usual, thanks :)
Pros:
- Looks nice (from the outside)
- Size is perfect, not too big not too small
- All panels are removeable for easy access
Cons:
- Literally everything else.
I bought this case (RGB Airflow with fans) and I was shocked, they managed to make all the bad design choices, even the fan cables routing could be much cleaner if the cables were on the other side. I spent ~5 hours assembling my PC inside this case, I can write a book on what they should have done differently.
Note that the shell is held by rivets instead of bolts, so if you thought you could flip it or something, you will not be able to do it easily.
iCue requires 9pin USB header, check if your motherboard has one, I have Minisforum BD790i so now I have to figure out how to connect it.
I would recommend to wait for the second version/revision (if they will make any), or if you really like how it looks and want to buy it then make sure you know what you get...
Most tech youtubers can't be trusted because they get paid to advertise stuff and also probably don't take the time to use the item themselves before reading the info points that the sponsor provided them.
You'd think they'd have at least 1 itx enthusiast working at corsair. 25L is massive for itx only board. Just go meshroom or meshlicious. There's so many superior options.
Unless I’m mistaken Origin sells a prebuilt using this case and JayzTwoCents did a review on it about 7-8 months ago and in that video with a 4080 founders and 13900k his temps were 80 and 75 C on cpu/gpu which for those components are pretty good in a sff build. Not sure why your temps were so off with lower spec components. I’d still consider this as a pontential case for a build if I were going sff
External looks, cheap plastic (6/10)
Internal design (5/10)
Price (5/10)
If you want vertical, just buy Meshroom,
or just grab the NR200P, so so many case better than this.
Always love your detailed ITX case reviews. I definitely like this style of tall standing ITX cases, but this one is a no go for me - It does look cheap for the price! I like the push-open hinged top panel of the Phanteks Evolv Shift cases with easy access to the I/O Ports - I rather have the MB on top. I just hope Phanteks or other brands release something better, while improving on the GPU cooling and support.
I just built a system with this case, and the new icue link system. With some patience, you can route and fit 25 mm fans on the front, but it depends on the ITX Motherboards I/O plate for some clearance.
MSI z790i EDGE WiFi
GTX 4090 FE
SF1000L
iCUE LINK H150i RGB AIO Liquid CPU Cooler with 3 additional fans.
I would highly suggest building or purchasing a custom length ATX 24 pin. Depending on the PSU 100 mm SFXL or 150 mm for SFX to allow easier wire management.
So far temps have been decent, and the pc is quiet under medium load.
I haven’t seen a video in about 2 years, but I am the only one that things they’re watching Mr. Sir from Holes doing a case review?
I wonder why Corsair didn't just put the motherboard at the top and the PSU at the bottom. There was an initial version with that layout.
Is corsair ever going to update their Ones?
thanks, really good review, i needed this, im going with the SSUPD
Why in hell build this without supporting the biggest Founder's edition? Makes no sense.
I feel as though Corsair wanted to use a different layout with a riser cable like nzxt which is very reminiscent of but didn’t want to pinch the cable like nzxt & cause a fire hazard, just speculation but possibility who knows
That's how it seems to me as well, it's a very safe sfx case just not a lot of creativity in my eyes from corsair.
@@hades1737 exactly what I was thinking, Corsair usually gets creative but maybe this was a too much of a safe approach
We need more tall slim cases.
The ONLY systems I've ever owned with components that failed (at any point - in or out of warranty) were Corsair Ones. The 1080 in my first gen failed after only a few years. More recently, an a200 experienced pump failure and the warranty replacement took over six weeks to process... oh, and was shipped with Win11 instead of the Win10 that I originally ordered and still prefer. This case initially looks interesting, but the PSU cable "management" on the back and the video I/O are far from optimal. Meanwhile, the lack of a top exhaust fan - you know, 'cuz heat tends to RISE - is just perplexing on a case this size (and at this price). IMHO, Corsair might want to take a look at what they're doing in this space (pre-builts, cases) and make some adjustments to improve quality and function.
Look at the nr200P mesh (case and filters) compared to this case and you will see the difference. All mesh is not created equal. GN has pointed this out many times.
that 2000 is super nice. next one am going to build!
I feel like the original version of this case was a little better ....it had fan at the top and all the i/o was at the top as well. The velcro straps were for all the cables.
10L-15L is the sweet spot for zero compromise. 24L is just too big.
Why is it so expensive? Its almost the same price as premium sff cases made from milled aluminium.
I had really high hopes for this, but the fact, that it doesn't support 4 slot gpus is unbelievable, considering its size. Like how does this have the same gpu support as a meshlicious?
Anyway, it shouldn't be too difficult to improve this case: just a more porous mesh and give the gpu a little more space.
Meshlicious uses riser, so it optimizes space better.
This case is NR200 placed vertically. This layout's biggest plus is compatibility with good air towers and no risers
@smtnbad for the price though you should just go with the nr200...
Make a watercool build with the case
I like the size, but not the price. The O11 air mini supports ATX boards and PSUs, and comes in at a lower price. The 5000d airflow is cheaper and supports bigger gpus. I was interested in moving to this case... Was
Producers need to fix one big flaw of vertical cases - media panel needs to be mountable both on top, or on bottom, else you are stuck on table or on the floor. Give me options dammit!
Nothing will ever top how insanely awesome the Corsair One was. And while this case is massive for an ITX, it is still very cool of a set up and smaller than an ATX case.
Did you test temps with the front set to exhaust and the side rad as intake? In the video the front looks set to intake, which probably isn't helping GPU temps.
Only fits up to 3-slot GPU, I'm using a 3.7-slot RTX 4080, sadly this case is not for me... Using SSUPD Meshroom S but I prefer the non-riser case like this
I guess I got lucky getting hold of my C4-SFX. quite happy with it, but would like some filtering on it. May have a shot at it this afternoon.
Looks like Corsair put their c team to work on this case.
Magnets on side panels and open frame design on the GPU side seems like a no brainer, and other manufacturers have been doing it for quite some time now.
Corsair builds cases to sell bigger AiO, more fans and make more money. It's not about what you want.
Rocking a SAMA IM01 with micro atx motherboard, full size psu, 2.5 slots gpu and a 155mm tower cooler. For $60. Can't beat that
How do you compare Corsair 2000D airflow vs jonsbo D31 Mesh, which one have better cooling? N which one you prefer to buy?
I think because of how cheap m.2 drives are these days they only felt the need for 1 sata ssd. m.2 is basically the standard now.
I'm using a Silverstone Alta G1M and this looks similar to that and I really like this kind of form factor that takes up less space on the desk but looking at the io location and quality, i think i'd rather stay with the Alta case for now. Hope more case companies makes these kinds of casings though.
I could swear someone put a 4080 in one
Yep
Nope. I got this case a week before the release date from a local retailer and it went back the next day. The case poorly space optimized (seriously though, the meshroom can fir a 353mm 4 slot GPU and a 280mm rad), has barely any cable management and has the jankiest PSU cable out I have ever seen on a case.
The only things going for it are the 360 rad support and the rgb fans.
Just makes me wish Corsair did a larger version capable of fitting Micro Atx boards. Which would be similar to Silverstone Alta G1M. I don't like being forced into both mini itx boards plus also SFX power supplies. That's just a double whammy for system builders. I do like the vertical aspect. And I feel a lot of people out have desk space to spare in height but not so much in depth. Personally I dont mind not having heaps of GPU options. But this is better than Silverstone's in that regard. I don't see Corsair or Silverstone stealing many people away from the AP201. Which is incredibly versatile. I know it started with NR200 and there are the Jonsbo ones etc too. I'll watch on to see where this small and tall design goes..
Cooler Master Haf XB EVO is still my Favorite case ever made. :)
I'm really liking the mesh panel designs. Tired of the fish tank unicorn vomit pc cases and my next machine will likely have no rgb or very limited rgb and either a solid panel or a mesh one like this or that asus prime ap201. I wish thermaltake would release a mesh version of their tower series that would be super cool.
Check out the Meshlicious or Meshroom S. Arguably better cases. The Meshlicious is even in the thermal testing chart in this video
I see a number of new cases have USB-C port but do not specify if this port can support USB 3.2 gen 2x2 or USB4. Are all USB-C ports created equal with full support for whatever?
@HardwareCanucks Will it fit a 4090 (Specifically MSI VENTUS 3X) or is that being to optimistic with the available GPU space? I assume to remove the dust filter so it can breathe a little more 😅
That peel was hilarious! 🤣
The most satisfying peel of my case reviewing career 😂
-D.
just wondering if it is possible to install 2 fans from the outside on the case, on side of the GPU to improve the temperatures, might not be suitable for everyone but if it does help significantly with temperature it might be viable.
Did any notice something painfully wrong with the case at 2:10 (Check the Front - Right - Bottom of the case)
i still think the best itx tower chassis design is Silverstone ft-03 mini
The FT-03 Mini is one of my all time favorite vertical cases. How I wish they would release an updated version for modern hardware...
The ports interface down is not an issue, it's a feature. I was already thinking CAD-ing a custom case like this, because there wasn't one.
how is not having access to your ports a feature?
@@elchartps3 What accessing the HDMI, DP, keyboard and mouse needs? It is connected and you leave it like that. Front ports are for sticks and other crap. People are crazed about aesthetics with their RGB sluthouse looks and somehow ignore how ugly the cables coming out from the back are.
Anyone know of a case similar to this thats taller than it is long? I dont want to take up a huge amaount of desk space to make an itx build.
Awesome review! Could you fit a 4090 strix in this?
Corsair: how do we capitalize on the new itx craze without spending a lot of money or effort
This seems like more of an MATX case rather than an ITX. They need to make a 1000 D case where you can fit up to a 280 mil. In it, but figure out a different place to set up the ITX motherboards only. That's easier to access than on the bottom
Isn't it possible, as you can install the side panels up side down, that the idea is so that the case can be flipped up side down? By moving the legs to the top and installing the side panels up side down?? Would make sense for me to have the IOs on the top, and hanging the GPU is a good thing I would say
OMFG The way you are moving the camera that way gave me motion sickness, which has never happen before! Good on you for making this happen to me.
I had to stop watching the video and come back to on my 3rd attempt to finish this video.
I see you are using a viper mini SE, how do you like it so far?
I'm reviewing the new Cobra line from Razer, so deff had to take out the Viper Mini SE and the SE is incredible. If you can find it, it's pretty OP.
-D.
@@HardwareCanucks thank you for the answer, waiting for the upcoming review :)
I watched over a dozen reviews of this case, this review is the only one that reports high GPU temps. I'm curious why. They all had the aio in exhaust with the three front fans as intake.
I still prefer the cooler master NR200p. The old one without the vertical gpu. Can fit most really high-end parts. Good performance and amd great price
Pay close attention to the gpu measurements. Their site lists 365 max and everywhere else is listing 320.
If you used your noctua cooler, would you be able to mount fans on the side as well or is there not enough room there
the rear end mobo connections really killed it for me
I'm struggling to understand who they're targeting with this because it's so expensive, but lacks a lot of the things that the SFF community would be willing to pay that premium for. After a certain size, cases have to contend with the NR200, which is much cheaper than this, and less of a headache because the I/O isn't pointed downward.
Those other SFF cases is too big so it's something you can't put in your living room but this 2000D is more feasible because of its small physical foot print. I like gaming on my 75inch Samsung Q-LED in the living room.
I like that it's boring look. Im 30 years old, I don't want RGB everywhere and the "gamery" nonsense. The pure black sleek look is awesome. If I want RGB, I can put some on later.
Think it is possible to migrate a corsair one into this case?
Would love to see the temps for the cpu and gpu when using that air cooler you had mounted!
5:39 when I saw this, I immediately thought the thermals will be shite, an obstructed top flow is never a good thing.
Any good mini itx case for 4080 and 4090 aftermarket that is usually available?
I believe the CPU cooler restriction is with an AiO for pump height.
Thost temps are amazing
Corsair: does not sell air coolers 120mm or less in height.
Corsair: sells liquid coolers.
Therefore Corsair: states maximum CPU cooler height 90mm.
I don't like that power cable on the back. Corsair need to reroute it inside and have the psu cable come out the bottom. They need redesigning that case.
Looks like Corsair is using the same mesh as the top filter on the 4000D, which is extremely restrictive. That's pretty bad decision choice in my opinion.
A bigger Meshlicious? I guess it's something
can't we make a small cut out for cables and mount fans outside, on the Gpu side?
How did you mount the D12L in a vertical configuration instead of horizontal?
I can't imagine why anyone would pick this over the Meshlicious?? I can fit my MSI Suprim X 4090 in the Meshlicious with a 280mm Radiator. The performance diff between 360mm and 280mm is almost negligible.
No hate to corsair but I have the DLH21 case by darkflash in my living room as an x-box "look alike" for couch gaming. It rivals this case for less money (granted it is smaller) and looks better IMO if you can find it available in the color you want.
The worst parts about this case have to be the fact that the cables that have to be plugged into the back of the motherboard & GPU have to be bent out of the bottom. The way this case could've been way better are...
1) Make the case a little bit taller so full sized ATX PSUs fit
2) Give more space for the GPU to breathe
3) Make the whole case horizontal instead of vertical
4) Anybody have anything else to add???
all those fancy cases look cool on youtube movie, but it sucks standing on your workplace, you'll just put it on the flor/behind desk anyway. So.... what's the point?
IS the founder edition supported?
can it accommodate a 3.5 slot, 325mm GPU like the 7900 XTX Nitro+ ?
i dont care about volum. it's occupied area on my desk.
Pulsar eS arm sleeve review soon Dimitry? :D
The RGB version of this retails for £150 in the UK. I've not been impressed with the reviews on this case either. IMO its too big, and a bit underwhelming.
I had been interested in the Fractal Terra for its small size and beautiful aesthetic, but its out of stock everywhere at the moment. I opted for the SSUPD Meshroom S at 15L for its full range of cooling and hardware support.
This could have been a NR200 competitor, but Corsair have missed the boat by a mile by making some avoidable and simple mistakes. What a shame.
i feel like the sizing of this is kind of awkward, its too big so more modest hardware would be swimming in it with all that extra room yet its too small to accommodate the really beefy stuff
Lol, the ironies of complaining about corsair new fans being expensive and than having an ad for phantek fans that are even more expensive :P
Man, the D30 3-pack is $89. They perform and look so much better. The 3-pack from Corsair is $159. What’s your point 😂
-D.
I hope that AIB 5090 models will be less THICC than the 4090s that they offer. It's really killing case compatibility. But then again, the 5090 will probably end up being more power hungry than the 4090. Dang it...
should also say how you configure your fan set up
That's weird his is like 80c's meanwhile mine is 65c-75c on max load lmao xD
Can the front of the case use 140mm fans?
Really piss poor effort from Corsair here. Dan's decision to make ONE batch of the C4 SFX & then discontinuing it is baffling too.